错误码目录 / Microsoft SQL Server
Microsoft SQL Server 错误码目录 · 第 9 / 18 页
本页收录 Microsoft SQL Server 的 17,993 条错误码知识条目,每条均可打开独立详情页,包含错误说明、编号信息、官方文档与公开资料。
- 14871 — REMOTE_DATA_ARCHIVE_OVERRIDE hint is not allowed inside an implicit transaction.
- 14872 — REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted on INSERT statements.
- 14873 — REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted within a view definition.
- 14874 — Table '%.*ls' cannot be a target of an update or delete statement with a FROM clause because it has the REMOTE_DATA_ARCHIVE option enabled.
- 14875 — DML operation failed because it would have affected one or more migrated (or migration-eligible) rows.
- 14876 — Table '%.*ls' cannot be the target of an update or delete statement through a view because it has the REMOTE_DATA_ARCHIVE option enabled.
- 14877 — Not all rows needed to reconcile with the remote data are available locally for table '%ls'. Needed batch ID : %I64d, Available batch ID : %I64d.
- 14878 — The filter predicate cannot be set for table '%ls' together with inbound migration.
- 14879 — Cannot perform update or delete using hint %.*ls over table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the ope…
- 14880 — Unexpected exception occurred during remote column update.
- 14881 — Unable to update remote data archive: Error: %d, Severity: %d, State: %d.
- 14882 — Cannot use STAGE_ONLY hint since the staging environment for the table '%.*ls' has not been provisioned yet.
- 14883 — Stretch remote table creation failed without specific exception.
- 14884 — Unable to load the stretch filter predicate for table "%.*ls".
- 14885 — Cannot reconcile columns for %S_MSG '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the %S_MSG.
- 14886 — Cannot set the rpo duration for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
- 14887 — Cannot run the procedure %.*ls for table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the operation.
- 14888 — Attempted inbound migration failed. Insert failed to insert all the rows. Expected rows : %d, Actual remote rows: %d.
- 14889 — Unable to process DML statement due to an unexpected operator in the migration predicate for table "%.*ls".
- 14890 — The maximum batch ID in the staging table cannot be greater than %I64d. Please perform the necessary delete/update operation using STAGE_ONLY hint to …
- 14891 — Table '%.*ls' cannot be a target of an update or delete statement with an OUTPUT clause because it has the REMOTE_DATA_ARCHIVE option enabled.
- 14892 — Table '%.*ls' cannot be a target of an update or delete statement through a CURSOR because it has the REMOTE_DATA_ARCHIVE option enabled.
- 14893 — Table '%.*ls' cannot be a target of an update or delete statement because it has the REMOTE_DATA_ARCHIVE option enabled without a migration predicate.
- 14894 — Table '%.*ls' cannot be a target of an update or delete statement because it has both the REMOTE_DATA_ARCHIVE option enabled and a BLOCK PREDICATE ena…
- 14895 — Cannot run the procedure %.*ls for table '%.*ls' since the max batch ID found in the stage table is different than the max batch ID found in the remot…
- 14896 — Reconciliation proc %.*ls brought down the local batch ID for the stretch table '%.*ls' of database '%.*ls' from %I64d to %I64d.
- 14897 — Cannot run the procedure %.*ls for table '%.*ls' since it is not stretched.
- 14898 — Cannot run the procedure %.*ls in database '%.*ls' since it is not connected to a remote database.
- 14899 — Specified RPO Duration cannot be less than the minimum duration of %d
- 14901 — Running an admin %ls operation on stretched table with ID %d using %ls hint.
- 14903 — Cannot rename column '%ls'. Columns on tables with REMOTE_DATA_ARCHIVE option enabled cannot be renamed.
- 14904 — Reauthorizing stretched database '%.*ls' with the remote database has completed successfully. Now reconciling remote tables and/or remote columns...
- 14905 — Reconciliation of remote tables and/or remote columns for stretched database '%.*ls' has completed successfully.
- 14906 — The database '%s' is not accessible. Ensure that the remote database exists. If you believe that your database should be accessible please retry the c…
- 14908 — Cannot set REMOTE_DATA_ARCHIVE to OFF from ON. To retrieve remote data and turn off remote data archive, set REMOTE_DATA_ARCHIVE (MIGRATION_STATE = IN…
- 14909 — Cannot currently use the REMOTE_DATA_ARCHIVE_OVERRIDE hint with table '%.*ls' because the remote table has not yet been created.
- 14910 — Cannot currently perform the requested operation against table '%.*ls' because it has the REMOTE_DATA_ARCHIVE option enabled but the remote table has …
- 14911 — %.*ls is set to '%.*ls' on table '%.*ls'.
- 14912 — REMOTE_DATA_ARCHIVE with value set to OFF_WITHOUT_DATA_RECOVERY is not supported at table creation. Please retry using a valid option'.
- 14913 — Failure was injected by '%ls' transaction/function.
- 14914 — The edition for database '%ls' is invalid. Only the Azure SQL Stretch edition is supported as a target for Stretch database.
- 14915 — The use of replication is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
- 14916 — Change Data Capture is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
- 14917 — The REMOTE_DATA_ARCHIVE option cannot be enabled on table '%ls' because it will exceed the maximum allowable size of %d bytes on the remote table due …
- 14918 — Reconfigure Failed. sp_configure option 'remote data archive' cannot be updated to 1. Stretch Database functionality is currently not supported with A…
- 14919 — Change Feed is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
- 15001 — Object '%ls' does not exist or is not a valid object for this operation.
- 15002 — The procedure '%s' cannot be executed within a transaction.
- 15003 — Only members of the %s role can execute this stored procedure.
- 15004 — Name cannot be NULL.
- 15005 — Statistics for all tables have been updated.
- 15006 — '%s' is not a valid name because it contains invalid characters.
- 15007 — '%s' is not a valid login or you do not have permission.
- 15008 — User '%s' does not exist in the current database.
- 15009 — The object '%s' does not exist in database '%s' or is invalid for this operation.
- 15010 — The database '%s' does not exist. Supply a valid database name. To see available databases, use sys.databases.
- 15011 — Database option '%s' does not exist. Specify a valid database option.
- 15012 — The device '%s' does not exist. Use sys.backup_devices to show available devices.
- 15013 — Table '%s': No columns without statistics found.
- 15014 — The role '%s' does not exist in the current database.
- 15015 — The server '%s' does not exist. Use sp_helpserver to show available servers.
- 15016 — The default '%s' does not exist.
- 15017 — The rule '%s' does not exist.
- 15018 — Table '%s': Creating statistics for the following columns:
- 15019 — The extended stored procedure '%s' does not exist.
- 15020 — Statistics have been created for the %d listed columns of the above tables.
- 15021 — Invalid value given for parameter %s. Specify a valid parameter value.
- 15022 — The specified user name is already aliased.
- 15023 — User, group, or role '%s' already exists in the current database.
- 15024 — The group '%s' already exists in the current database.
- 15025 — The server principal '%s' already exists.
- 15026 — Logical device '%s' already exists.
- 15028 — The server '%s' already exists.
- 15032 — The database '%s' already exists. Specify a unique database name.
- 15033 — '%s' is not a valid official language name.
- 15034 — The application role password must not be NULL.
- 15036 — The data type '%s' does not exist or you do not have permission.
- 15040 — User-defined error messages must have an ID greater than 50000.
- 15041 — User-defined error messages must have a severity level between 1 and 25.
- 15042 — The @with_log parameter is ignored for messages that are not us_english version.
- 15043 — You must specify 'REPLACE' to overwrite an existing message.
- 15044 — The type "%s" is an unknown backup device type. Use the type "disk" or "tape".
- 15045 — The logical name cannot be NULL.
- 15046 — The physical name cannot be NULL.
- 15048 — Valid values of the database compatibility level are %d, %d, %d, %d or %d.
- 15049 — Cannot unbind from '%s'. Use ALTER TABLE DROP CONSTRAINT.
- 15050 — Cannot bind default '%s'. The default must be created using the CREATE DEFAULT statement.
- 15051 — Cannot rename the table because it is published for replication.
- 15053 — Objects exist which are not owned by the database owner.
- 15054 — The current compatibility level is %d.
- 15056 — The suspect flag on the database "%s" is already reset.
- 15057 — List of %s name contains spaces, which are not allowed.
- 15058 — List of %s has too few names.
- 15059 — List of %s has too many names.
- 15060 — List of %s names contains name(s) which have '%s' non-alphabetic characters.
- 15061 — The add device request was denied. A physical device named "%s" already exists. Only one backup device may refer to any physical device name.
- 15062 — The guest user cannot be mapped to a login name.
- 15063 — The login already has an account under a different user name.
- 15065 — All user IDs have been assigned.
- 15066 — A default-name mapping of a remote login from remote server '%s' already exists.
- 15068 — A remote user '%s' already exists for remote server '%s'.
- 15069 — One or more users are using the database. The requested operation cannot be completed.
- 15070 — Object '%s' was successfully marked for recompilation.
- 15071 — Usage: sp_addmessage <msgnum>,<severity>,<msgtext> [,<language> [,FALSE | TRUE [,REPLACE]]]
- 15072 — Usage: sp_addremotelogin remoteserver [,loginname [,remotename]]
- 15074 — Warning: You must recover this database prior to access.
- 15076 — Default, table, and user data types must be in the current database.
- 15077 — Rule, table, and user data type must be in the current database.
- 15078 — The table or view must be in the current database.
- 15079 — Queries processed: %d.
- 15080 — Cannot use parameter %s for a Windows login.
- 15081 — Membership of the public role cannot be changed.
- 15083 — Physical data type '%s' does not accept a collation
- 15084 — The column or user data type must be in the current database.
- 15085 — Usage: sp_addtype name, 'data type' [,'NULL' | 'NOT NULL']
- 15096 — Could not find object '%ls' or you do not have required permission or the object is not valid for adding extended property.
- 15097 — The size associated with an extended property cannot be more than 7,500 bytes.
- 15098 — The name change cannot be performed because the SID of the new name does not match the old SID of the principal.
- 15099 — The MUST_CHANGE option cannot be used when CHECK_EXPIRATION is OFF.
- 15100 — Usage: sp_bindefault defaultname, objectname [, 'futureonly']
- 15101 — Cannot bind a default to a computed column, a sparse column, or to a column of the following data types: timestamp, varchar(max), nvarchar(max), varbi…
- 15102 — Cannot bind a default to an identity column.
- 15103 — Cannot bind a default to a column created with or altered to have a default value.
- 15104 — You do not own a table named '%s' that has a column named '%s'.
- 15106 — Usage: sp_bindrule rulename, objectname [, 'futureonly']
- 15107 — Cannot bind a rule to a computed column, a sparse column, or to a column of the following data types: text, ntext, image, timestamp, varchar(max), nva…
- 15108 — sp_addtype cannot be used to define user-defined data types for varchar(max), nvarchar(max) or varbinary(max) data types. Use CREATE TYPE for this pur…
- 15109 — Cannot change the owner of the master, model, tempdb or distribution database.
- 15110 — The proposed new database owner is already a user or aliased in the database.
- 15111 — The proposed new database owner is already aliased in the database.
- 15112 — The third parameter for table option 'text in row' is invalid. It should be 'on', 'off', '0', '1' or a number from 24 through 7000.
- 15113 — Too many failed login attempts. This account has been temporarily locked as a precaution against password guessing. A system administrator can unlock …
- 15114 — Password validation failed. The password for the user is too recent to change.
- 15115 — Password validation failed. The password cannot be used at this time.
- 15116 — Password validation failed. The password does not meet the operating system policy requirements because it is too short.
- 15117 — Password validation failed. The password does not meet the operating system policy requirements because it is too long.
- 15118 — Password validation failed. The password does not meet the operating system policy requirements because it is not complex enough.
- 15119 — Password validation failed. The password does not meet the requirements of the password filter DLL.
- 15120 — An unexpected error occurred during password validation.
- 15121 — An error occurred during the execution of %ls. A call to '%ls' failed with error code: '%d'.
- 15122 — The CHECK_EXPIRATION option cannot be used when CHECK_POLICY is OFF.
- 15123 — The configuration option '%s' does not exist, or it may be an advanced option.
- 15124 — The configuration option '%s' is not unique.
- 15125 — Trigger '%s' is not a trigger for '%s'.
- 15127 — Cannot set the default language to a language ID not defined in syslanguages.
- 15128 — The CHECK_POLICY and CHECK_EXPIRATION options cannot be turned OFF when MUST_CHANGE is ON.
- 15129 — '%d' is not a valid value for configuration option '%s'.
- 15130 — There already exists a '%s' trigger for '%s'.
- 15131 — Usage: sp_dbremove <dbname> [,dropdev]
- 15133 — INSTEAD OF trigger '%s' cannot be associated with an order.
- 15134 — No alias exists for the specified user.
- 15135 — Object is invalid. Extended properties are not permitted on '%s', or the object does not exist.
- 15136 — The database principal is set as the execution context of one or more procedures, functions, or event notifications and cannot be dropped.
- 15137 — An error occurred during the execution of sp_xp_cmdshell_proxy_account. Possible reasons: the provided account was invalid or the '%.*ls' credential c…
- 15138 — The database principal owns a %S_MSG in the database, and cannot be dropped.
- 15141 — The server principal owns one or more %S_MSG(s) and cannot be dropped.
- 15143 — '%s' is not a valid option for the @updateusage parameter. Enter either 'true' or 'false'.
- 15144 — The role has members. It must be empty before it can be dropped.
- 15145 — An implicit %S_MSG creation has failed. Reason: The %S_MSG may have been dropped or its name may already be in use.
- 15146 — An encryption password must be provided to encrypt the private key of this %S_MSG.
- 15147 — No decryption password should be provided because the private key of this %S_MSG is encrypted by a master key.
- 15148 — The data type or table column '%s' does not exist or you do not have permission.
- 15149 — Principal doesn't exist or doesn't have sufficient privileges.
- 15150 — Cannot %S_MSG the %S_MSG '%.*ls'.
- 15151 — Cannot %S_MSG the %S_MSG '%.*ls', because it does not exist or you do not have permission.
- 15152 — Cannot update user instances. Reason: %ls. Error code: 0x%x.
- 15153 — The xp_cmdshell proxy account information cannot be retrieved or is invalid. Verify that the '%.*ls' credential exists and contains valid information.
- 15154 — The database principal owns an %S_MSG and cannot be dropped.
- 15155 — The server principal owns a %S_MSG and cannot be dropped.
- 15156 — The password that you specified is too long. The password should have no more than %d characters.
- 15157 — Setuser failed because of one of the following reasons: the database principal '%.*ls' does not exist, its corresponding server principal does not hav…
- 15158 — Cannot initialize security.
- 15159 — Maximum impersonation nesting level exceeded (limit %d)..
- 15160 — Cannot issue impersonation token from non-primary impersonation context or for non-Windows user.
- 15161 — Cannot set application role '%.*ls' because it does not exist or the password is incorrect.
- 15162 — Unexpected error while creating impersonation token.
- 15163 — Invalid timeout value. Valid timeout is between 1 and 7200 sec.
- 15164 — '%.*ls' is not a valid login or cannot be issued impersonation token.
- 15165 — Could not find object '%ls' or you do not have permission.
- 15166 — Warning: User types created via sp_addtype are contained in dbo schema. The @owner parameter if specified is ignored.
- 15167 — Cannot generate GUID.
- 15168 — Cannot rename the view '%s' and its columns and indexes because it is a system generated view that was created for optimization purposes.
- 15169 — The server option "%ls" is not available in this edition of SQL Server.
- 15170 — This login is the owner of %ld job(s). You must delete or reassign these jobs before the login can be dropped.
- 15171 — Cannot use the parameter "%s" for a certificate or asymmetric key login.
- 15172 — FallBack certificate must be created or dropped in master database in single user mode.
- 15173 — Server principal '%s' has granted one or more permission(s). Revoke the permission(s) before dropping the server principal.
- 15174 — Login '%s' owns one or more database(s). Change the owner of the database(s) before dropping the login.
- 15175 — Login '%s' is aliased or mapped to a user in one or more database(s). Drop the user or alias before dropping the login.
- 15176 — The only valid @parameter value is 'WITH_LOG'.
- 15177 — Usage: sp_dropmessage <msg number> [,<language> | 'ALL']
- 15178 — Cannot drop a message with an ID less than 50,000.
- 15179 — The message number %u or specified language version does not exist.
- 15182 — Cannot disable access to the guest user in master or tempdb.
- 15183 — The database principal owns objects in the database and cannot be dropped.
- 15184 — The database principal owns data types in the database and cannot be dropped.
- 15185 — There is no remote user '%s' mapped to local user '%s' from the remote server '%s'.
- 15186 — The server principal is set as the execution context of a trigger or event notification and cannot be dropped.
- 15187 — The %S_MSG cannot be dropped because it is used by one or more %S_MSG(s).
- 15188 — Cannot create an index that does not include all security columns.
- 15189 — Cannot have more than one security column for a table.
- 15190 — There are still remote logins or linked logins for the server '%s'.
- 15192 — Cannot alter or drop the security column of a table.
- 15195 — The MUST_CHANGE option is not supported by this version of Microsoft Windows.
- 15196 — The current security context is non-revertible. The "Revert" statement failed.
- 15197 — There is no text for object '%s'.
- 15198 — The name supplied (%s) is not a user, role, or aliased login.
- 15199 — The current security context cannot be reverted. Please switch to the original database where '%ls' was called and try it again.
- 15200 — There are no remote servers defined.
- 15201 — There are no remote logins for the remote server '%s'.
- 15202 — There are no remote logins defined.
- 15203 — There are no remote logins for '%s'.
- 15204 — There are no remote logins for '%s' on remote server '%s'.
- 15205 — There are no servers defined.
- 15206 — Invalid Remote Server Option: '%s'.
- 15207 — The trusted option in remote login mapping is no longer supported.
- 15208 — The certificate, asymmetric key, or private key file is not valid or does not exist; or you do not have permissions for it.
- 15209 — An error occurred during encryption.
- 15212 — Invalid certificate subject. The certificate subject must have between 1 and %d characters.
- 15213 — Warning: The certificate you created has an invalid validity period; its expiration date precedes its start date.
- 15214 — Warning: The certificate you created is expired.
- 15215 — Warning: The certificate you created is not yet valid; its start date is in the future.
- 15216 — '%s' is not a valid option for the @delfile parameter.
- 15217 — Property cannot be updated or deleted. Property '%.*ls' does not exist for '%.*ls'.
- 15218 — Object '%s' is not a table.
- 15219 — Cannot change the owner of an indexed view.
- 15222 — Remote login option '%s' is not unique.
- 15223 — Error: The input parameter '%s' is not allowed to be null.
- 15224 — Error: The value for the @newname parameter contains invalid characters or violates a basic restriction (%s).
- 15225 — No item by the name of '%s' could be found in the current database '%s', given that @itemtype was input as '%s'.
- 15226 — Cannot create alias types from an XML datatype.
- 15227 — The database '%s' cannot be renamed.
- 15228 — A member of the sysadmin role must set database '%s' to single user mode with sp_dboption before it can be renamed.
- 15229 — The argument specified for the "%.*ls" parameter of stored procedure sp_db_vardecimal_storage_format is not valid. Valid arguments are 'ON' or 'OFF'.
- 15230 — Error starting user instance. Error code: %d.
- 15231 — The argument specified for the '%ls' parameter of stored procedure '%ls' is not valid. Valid arguments are 'ON', 'OFF', 'TRUE' and 'FALSE'.
- 15232 — A certificate with name '%s' already exists or this certificate already has been added to the database.
- 15233 — Property cannot be added. Property '%.*ls' already exists for '%.*ls'.
- 15234 — Objects of this type have no space allocated.
- 15236 — Column '%s' has no default.
- 15237 — User data type '%s' has no default.
- 15238 — Column '%s' has no rule.
- 15239 — User data type '%s' has no rule.
- 15240 — Cannot write into file '%s'. Verify that you have write permissions, that the file path is valid, and that the file does not already exist.
- 15241 — Usage: sp_dboption [dbname [,optname [,'true' | 'false']]]
- 15242 — Database option '%s' is not unique.
- 15243 — The option '%s' cannot be changed for the master database.
- 15244 — Only members of the sysadmin role or the database owner may set database options.
- 15246 — Cannot dump the private key of certificate '%s' because the private key cannot be found.
- 15247 — User does not have permission to perform this action.
- 15248 — Either the parameter @objname is ambiguous or the claimed @objtype (%s) is wrong.
- 15249 — Error: Explicit @objtype '%s' is unrecognized.
- 15250 — The database name component of the object qualifier must be the name of the current database.
- 15251 — Invalid '%s' specified. It must be %s.
- 15252 — The primary or foreign key table name must be given.
- 15253 — Syntax error parsing SQL identifier '%s'.
- 15254 — Users other than the database owner or guest exist in the database. Drop them before removing the database.
- 15255 — '%s' is not a valid value for @autofix . The only valid value is 'auto'.
- 15256 — Usage: sp_certify_removable <dbname> [,'auto']
- 15257 — The database that you are attempting to certify cannot be in use at the same time.
- 15258 — The database must be owned by a member of the sysadmin role before it can be removed.
- 15259 — The DEFAULT_SCHEMA clause cannot be used with principals mapped to certificates or asymmetric keys.
- 15260 — The format of the security descriptor string '%s' is invalid.
- 15261 — Usage: sp_create_removable <dbname>,<syslogical>,<sysphysical>,<syssize>,<loglogical>,<logphysical>,<logsize>,<datalogical1>,<dataphysical1>,<datasize…
- 15262 — Invalid file size entered. All files must be at least 1 MB.
- 15263 — A SID in the security descriptor string '%s' could not be found in an account lookup operation.
- 15264 — Could not create the '%s' portion of the database.
- 15265 — An unexpected error has occurred in the processing of the security descriptor string '%s'.
- 15266 — Cannot make '%s' database removable.
- 15267 — A security descriptor with name '%s' already exists.
- 15268 — Authentication mode is %s.
- 15269 — Logical data device '%s' not created.
- 15271 — Invalid @with_log parameter value. Valid values are 'true' or 'false'.
- 15272 — The %s '%.*s' is not trusted to execute.
- 15273 — The decryption key is incorrect.
- 15274 — Access to the remote server is denied because the current security context is not trusted.
- 15276 — Cannot provision master key passwords for system databases.
- 15277 — The only valid @parameter_value values are 'true' or 'false'.
- 15278 — Login '%s' is already mapped to user '%s' in database '%s'.
- 15279 — You must add the us_english version of this message before you can add the '%s' version.
- 15280 — All localized versions of this message must be dropped before the us_english version can be dropped.
- 15281 — SQL Server blocked access to %S_MSG '%ls' of component '%.*ls' because this component is turned off as part of the security configuration for this ser…
- 15282 — A key with name '%.*ls' or user defined unique identifier already exists or you do not have permissions to create it.
- 15283 — The name '%s' contains too many characters.
- 15284 — The database principal has granted or denied permissions to objects in the database and cannot be dropped.
- 15285 — The special word '%s' cannot be used for a logical device name.
- 15286 — Terminating this procedure. The @action '%s' is unrecognized. Try 'REPORT', 'UPDATE_ONE', or 'AUTO_FIX'.
- 15287 — Terminating this procedure. '%s' is a forbidden value for the login name parameter in this procedure.
- 15288 — Please specify one decryptor to decrypt a key.
- 15289 — Terminating this procedure. Cannot have an open transaction when this is run.
- 15291 — Terminating this procedure. The %s name '%s' is absent or invalid.
- 15292 — The row for user '%s' will be fixed by updating its login link to a login already in existence.
- 15293 — Barring a conflict, the row for user '%s' will be fixed by updating its link to a new login.
- 15294 — The number of orphaned users fixed by adding new logins and then updating users was %d.
- 15295 — The number of orphaned users fixed by updating users was %d.
- 15296 — General cryptographic failure.
- 15297 — The certificate, asymmetric key, or private key data is invalid.
- 15299 — The signature of the public key is invalid.
- 15300 — No recognized letter is contained in the parameter value for General Permission Type (%s). Valid letters are in this set: %s .
- 15301 — Collation '%s' is supported for Unicode data types only and cannot be set at either the database or server level.
- 15302 — Database_Name should not be used to qualify owner.object for the parameter into this procedure.
- 15303 — The "user options" config value (%d) was rejected because it would set incompatible options.
- 15304 — The severity level of the '%s' version of this message must be the same as the severity level (%ld) of the us_english version.
- 15305 — The @TriggerType parameter value must be 'insert', 'update', or 'delete'.
- 15306 — Cannot change the compatibility level of replicated or distributed databases.
- 15307 — Could not change the merge publish option because the server is not set up for replication.
- 15308 — You must set database '%s' to single user mode with sp_dboption before fixing indexes on system tables.
- 15309 — Cannot alter the trustworthy state of the model or tempdb databases.
- 15310 — Failed to configure user instance on startup. Error updating server metadata.
- 15311 — The file named '%s' does not exist.
- 15312 — The file named '%s' is a primary file and cannot be removed.
- 15313 — The key is not encrypted using the specified decryptor.
- 15314 — Either no algorithm has been specified or the bitlength and the algorithm specified for the key are not available in this installation of this operati…
- 15315 — The key '%.*ls' is not open. Please open the key before using it.
- 15316 — Global temporary keys are not allowed. You can only use local temporary keys.
- 15317 — The master key file does not exist or has invalid format.
- 15318 — All fragments for database '%s' on device '%s' are now dedicated for log usage only.
- 15319 — Error: DBCC DBREPAIR REMAP failed for database '%s' (device '%s').
- 15320 — An error occurred while decrypting %S_MSG '%.*ls' that was encrypted by the old master key. The FORCE option can be used to ignore this error and cont…
- 15321 — There was some problem removing '%s' from sys.master_files.
- 15322 — File '%s' was removed from tempdb, and will take effect upon server restart.
- 15323 — The selected index does not exist on table '%s'.
- 15324 — The option %s cannot be changed for the '%s' database.
- 15325 — The current database does not contain a %s named '%ls'.
- 15326 — No extended stored procedures exist.
- 15327 — The database is now offline.
- 15328 — The database is offline already.
- 15329 — The current master key cannot be decrypted. If this is a database master key, you should attempt to open it in the session before performing this oper…
- 15330 — There are no matching rows on which to report.
- 15331 — The user '%s' cannot take the action auto_fix due to duplicate SID.
- 15332 — The private key is already set for this file. To change it you should drop and re-create the certificate.
- 15333 — Error: The qualified @oldname references a database (%s) other than the current database.
- 15334 — The %S_MSG has a private key that is protected by a user defined password. That password needs to be provided to enable the use of the private key.
- 15335 — Error: The new name '%s' is already in use as a %s name and would cause a duplicate that is not permitted.
- 15336 — Object '%s' cannot be renamed because the object participates in enforced dependencies.
- 15337 — Caution: sys.sql_dependencies shows that other objects (views, procedures and so on) are referencing this object by its old name. These objects will b…
- 15339 — Creating '%s'.
- 15342 — There is no private key provisioned for %S_MSG '%.*ls'.
- 15343 — The username and/or password passed in is invalid or the current process does not have sufficient privileges.
- 15344 — Ownership change for %S_MSG is not supported.
- 15345 — An entity of type %S_MSG cannot be owned by a role, a group, or by principals mapped to certificates or asymmetric keys.
- 15346 — Cannot change owner for an object that is owned by a parent object. Change the owner of the parent object instead.
- 15347 — Cannot transfer an object that is owned by a parent object.
- 15348 — Cannot transfer a schemabound object.
- 15349 — Cannot transfer an MS Shipped object.
- 15350 — An attempt to attach an auto-named database for file %.*ls failed. A database with the same name exists, or specified file cannot be opened, or it is …
- 15351 — The CLR procedure/function/type being signed refers to an assembly that is not signed either by a strong name or an assembly.
- 15352 — The %S_MSG cannot be dropped because one or more entities are either signed or encrypted using it.
- 15353 — An entity of type %S_MSG cannot be owned by a role, a group, an approle, or by principals mapped to certificates or asymmetric keys.
- 15354 — Usage: sp_detach_db <dbname>, [TRUE|FALSE], [TRUE|FALSE]
- 15356 — The current application role has been dropped. The current security context contains no valid database user context.
- 15357 — The current security context was set by "%ls". It cannot be reverted by statement "%ls".
- 15358 — User-defined filegroups should be made read-only.
- 15359 — Cannot add functional unit '%.*ls' to component '%.*ls'. This unit has been already registered with the component.
- 15360 — An error occurred while trying to load the xpstar dll to read the agent proxy account from LSA.
- 15361 — An error occurred while trying to read the SQLAgent proxy account credentials from the LSA.
- 15362 — An error occurred while trying to create the '%.*ls' credential.
- 15364 — Failed to generate a user instance of SQL Server. Only an integrated connection can generate a user instance. The connection will be closed.%.*ls
- 15365 — Failed to generate a user instance of SQL Server. Only members of Builtin\Users can generate a user instance. The connection will be closed.%.*ls
- 15366 — Failed to generate a user instance of SQL Server due to low memory. The connection will be closed.%.*ls
- 15367 — Failed to generate a user instance of SQL Server due to a failure in generating a unique user instance name. The connection will be closed.%.*ls
- 15368 — Failed to generate a user instance of SQL Server due to a failure in reading registry keys. The connection will be closed.%.*ls
- 15369 — Failed to generate a user instance of SQL Server due to a failure in impersonating the client. The connection will be closed.%.*ls
- 15370 — Failed to generate a user instance of SQL Server due to a failure in copying database files. The connection will be closed.%.*ls
- 15371 — Failed to generate a user instance of SQL Server due to a failure in creating user instance event. The connection will be closed.%.*ls
- 15372 — Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.%.*ls
- 15373 — Failed to generate a user instance of SQL Server due to a failure in obtaining the user instance's process information. The connection will be closed.…
- 15374 — Failed to generate a user instance of SQL Server due to a failure in persisting the user instance information into system catalog. The connection will…
- 15375 — Failed to generate a user instance of SQL Server due to a failure in making a connection to the user instance. The connection will be closed.%.*ls
- 15376 — Failed to generate a user instance of SQL Server. Only the SQL Server Express version lets you generate a user instance. The connection will be closed…
- 15377 — Failed to configure user instance on startup. Error adding user to sysadmin role.
- 15378 — Failed to configure user instance on startup. Error configuring system database entries in MASTER DB.
- 15380 — Failed to configure user instance on startup. Error configuring system database paths in MASTER DB.
- 15381 — Failed to generate a user instance of SQL Server due to a failure in updating security descriptor on the process of the user instance.
- 15382 — Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a …
- 15383 — Generating user instances in SQL Server is disabled. Use sp_configure 'user instances enabled' to generate user instances.%.*ls
- 15384 — Failed to configure user instance on startup. Error updating Resource Manager ID.
- 15385 — No database principal is defined for sid '%.*ls'.
- 15386 — Another batch in the session is changing security context, new batch is not allowed to start.
- 15387 — If the qualified object name specifies a database, that database must be the current database.
- 15388 — There is no user table matching the input name '%s' in the current database or you do not have permission to access the table.
- 15389 — sp_indexoption is not supported for XML or spatial indexes. Use ALTER INDEX instead.
- 15390 — Input name '%s' does not have a matching user table or indexed view in the current database.
- 15391 — sp_indexoption is not supported for XML Index and the table has an XML index on it. Use ALTER INDEX instead to set the option for ALL the indexes.
- 15392 — The specified option '%s' is not supported by this edition of SQL Server and cannot be changed using sp_configure.
- 15393 — An error occurred while decrypting the password for linked login '%.*ls' that was encrypted by the old master key. The FORCE option can be used to ign…
- 15394 — Collation '%s' is not supported by the operating system
- 15395 — The qualified old name could not be found for item type '%s'.
- 15396 — An asymmetric key with name '%s' already exists or this asymmetric key already has been added to the database.
- 15397 — The %S_MSG is not protected by a password. A decryption password cannot be used for this operation.
- 15398 — Only objects in the master database owned by dbo can have the startup setting changed.
- 15399 — Could not change startup option because this option is restricted to objects that have no parameters.
- 15401 — Windows NT user or group '%s' not found. Check the name again.
- 15402 — '%s' is not a fixed server role.
- 15403 — The server principal "%.*ls" does not exist, does not have server access, or you do not have permission.
- 15404 — Could not obtain information about Windows NT group/user '%ls', error code %#lx.
- 15405 — Cannot use the special principal '%s'.
- 15406 — Cannot execute as the server principal because the principal "%.*ls" does not exist, this type of principal cannot be impersonated, or you do not have…
- 15407 — '%s' is not a valid Windows NT name. Give the complete name: <domain\username>.
- 15408 — "%ls" cannot be called in this batch because a simultaneous batch has called it.
- 15409 — '%s' is not a role.
- 15410 — User or role '%s' does not exist in this database.
- 15411 — Database principal or schema '%s' does not exist in this database.
- 15412 — '%s' is not a known fixed role.
- 15413 — Cannot make a role a member of itself.
- 15414 — Cannot set compatibility level because database has a view or computed column that is indexed. These indexes require a SQL Server compatible database.
- 15415 — User is a member of more than one group. sp_changegroup is set up for backward compatibility and expects membership in one group at most.
- 15416 — Usage: sp_dbcmptlevel [dbname [, compatibilitylevel]]
- 15418 — Only members of the sysadmin role or the database owner may set the database compatibility level.
- 15419 — Supplied parameter sid should be binary(16).
- 15420 — The group '%s' does not exist in this database.
- 15421 — The database principal owns a database role and cannot be dropped.
- 15422 — Application roles can only be activated at the ad hoc level.
- 15425 — No server principal is defined for sid '%.*ls'.
- 15426 — You must specify a provider name with this set of properties.
- 15427 — You must specify a provider name for unknown product '%ls'.
- 15428 — You cannot specify a provider or any properties for product '%ls'.
- 15429 — '%ls' is an invalid product name.
- 15431 — You must specify the @rolename parameter.
- 15432 — Stored procedure '%s' can only be executed at the ad hoc level.
- 15433 — Supplied parameter sid is in use.
- 15434 — Could not drop login '%s' as the user is currently logged in.
- 15435 — Database successfully published.
- 15436 — Database successfully enabled for subscriptions.
- 15437 — Database successfully published using merge replication.
- 15438 — Database is already online.
- 15439 — Database is now online.
- 15440 — Database is no longer published.
- 15441 — Database is no longer enabled for subscriptions.
- 15442 — Database is no longer enabled for merge publications.
- 15443 — Checkpointing database that was changed.
- 15448 — Encryption by the machine key cannot be added to the service master key because the service master key cannot be decrypted or does not exist.
- 15449 — Type Added
- 15450 — New language inserted.
- 15451 — Dropping an encryption from the service master key failed. No encryption by the machine key exists.
- 15452 — No alternate languages are available.
- 15453 — us_english is always available, even though it is not in syslanguages.
- 15454 — Language deleted.
- 15455 — Adding an encryption to the service master key failed. An encryption by the machine key already exists.
- 15456 — Valid configuration options are:
- 15457 — Configuration option '%ls' changed from %ld to %ld. Run the RECONFIGURE statement to install.
- 15458 — Database removed.
- 15459 — In the current database, the specified object references the following:
- 15460 — In the current database, the specified object is referenced by the following:
- 15461 — Object does not reference any object, and no objects reference it.
- 15462 — File '%s' closed.
- 15463 — Device dropped.
- 15464 — Unsupported private key format or key length.
- 15465 — The private key password is invalid.
- 15466 — An error occurred during decryption.
- 15468 — An error occurred during the generation of the %S_MSG.
- 15469 — No constraints are defined on object '%ls', or you do not have permissions.
- 15470 — No foreign keys reference table '%ls', or you do not have permissions on referencing tables.
- 15471 — The text for object '%ls' is encrypted.
- 15472 — The object '%ls' does not have any indexes, or you do not have permissions.
- 15474 — Invalid private key. The private key does not match the public key of the %S_MSG.
- 15475 — The database is renamed and in single user mode.
- 15476 — A member of the sysadmin role must reset the database to multiuser mode with sp_dboption.
- 15477 — Caution: Changing any part of an object name could break scripts and stored procedures.
- 15482 — Cannot change the owner of a table that has an indexed view.
- 15490 — The dependent aliases were also dropped.
- 15497 — Could not add login using sp_addlogin (user = %s). Terminating this procedure.
- 15499 — The dependent aliases were mapped to the new database owner.
- 15500 — The dependent aliases were dropped.
- 15502 — Setting database owner to SA.
- 15503 — Giving ownership of all objects to the database owner.
- 15504 — Deleting users except guest and the database owner from the system catalog.
- 15505 — Cannot change owner of object '%ls' or one of its child objects because the new owner '%ls' already has an object with the same name.
- 15506 — An error occurred while signing.
- 15507 — A key required by this operation appears to be corrupted.
- 15508 — An error occurred while generating a key required by this operation.
- 15509 — The password cannot be dropped because another database may be using it.
- 15510 — Cannot enable a login that has an empty password.
- 15511 — Default bound to column.
- 15512 — Default bound to data type.
- 15513 — The new default has been bound to columns(s) of the specified user data type.
- 15514 — Rule bound to table column.
- 15515 — Rule bound to data type.
- 15516 — The new rule has been bound to column(s) of the specified user data type.
- 15517 — Cannot execute as the database principal because the principal "%.*ls" does not exist, this type of principal cannot be impersonated, or you do not ha…
- 15518 — Cannot execute as the Windows token. It is not valid, or you do not have permission.
- 15519 — Default unbound from table column.
- 15520 — Default unbound from data type.
- 15521 — Columns of the specified user data type had their defaults unbound.
- 15522 — Rule unbound from table column.
- 15523 — Rule unbound from data type.
- 15524 — Columns of the specified user data type had their rules unbound.
- 15525 — sp_checknames is used to search for non 7-bit ASCII characters.
- 15526 — in several important columns of system tables. The following
- 15527 — columns are searched:
- 15528 — In master:
- 15529 — Cannot execute as the ticket. It is not valid, or you do not have permission.
- 15530 — The %S_MSG with name "%.*ls" already exists.
- 15531 — The security descriptor information is not valid.
- 15532 — The security descriptor is invalid because it does not contain information about its owner or about its primary group.
- 15533 — Invalid data type is supplied in the '%ls' statement.
- 15534 — Cookie generation failed in the '%ls' statement.
- 15535 — Cannot set a credential for principal '%.*ls'.
- 15536 — In all databases:
- 15537 — Login '%.*ls' does not have access to server.
- 15538 — Login '%.*ls' does not have access to database.
- 15539 — User '%s' cannot be dropped, it can only be disabled. The user is already disabled in the current database.
- 15540 — The identity string is too long. The identity string should contain no more than %d characters.
- 15541 — Cannot drop the credential '%.*ls' because it is used by a server principal.
- 15542 — Cannot create a key without specifying an encryptor.
- 15556 — Cannot decrypt or encrypt using the specified %S_MSG, either because it has no private key or because the password provided for the private key is inc…
- 15557 — There is already a %S_MSG by %S_MSG '%.*ls'.
- 15558 — Cannot drop %S_MSG by %S_MSG '%.*s'.
- 15559 — Cannot drop %S_MSG '%.*ls' because there is a %S_MSG mapped to it.
- 15560 — Cannot add or drop a signature on '%.*ls' because only modules can be signed.
- 15561 — Signatures based on certificates or asymmetric keys are the only options supported in this version of the product.
- 15562 — The module being executed is not trusted. Either the owner of the database of the module needs to be granted authenticate permission, or the module ne…
- 15563 — The %S_MSG has no private key set for it.
- 15574 — This object does not have any statistics.
- 15575 — This object does not have any statistics or indexes.
- 15576 — You cannot set network name on server '%ls' because it is not a linked SQL Server.
- 15577 — Warning: A linked server that refers to the originating server is not a supported scenario. If you wish to use a four-part name to reference a local t…
- 15578 — There is already a master key in the database. Please drop it before performing this statement.
- 15579 — Adding an encryption to the symmetric key failed. An encryption by the same %S_MSG '%.*s' may already exist.
- 15580 — Cannot drop %S_MSG because %S_MSG '%.*s' is encrypted by it.
- 15581 — Please create a master key in the database or open the master key in the session before performing this operation.
- 15582 — Cannot set aliases for certificate logins or asymmetric key logins.
- 15583 — The module being signed is marked to execute as owner. If the owner changes the signature will not be valid.
- 15584 — An error occurred while decrypting %S_MSG '%.*ls' that was encrypted by the old master key. The error was ignored because the FORCE option was specifi…
- 15585 — The current master key cannot be decrypted. The error was ignored because the FORCE option was specified.
- 15586 — Error in synchronizing system certificates between master and resource database.
- 15587 — Cannot change owner of Assembly '%.*ls' since dependent assembly '%.*ls' is not owned by the new owner.
- 15588 — The old and new master keys are identical. No data re-encryption is required.
- 15589 — Cannot revert the current security context because the cookie is invalid.
- 15590 — Can only use the 'No Revert' or 'Cookie' options with the 'Execute As' statement at the adhoc level.
- 15591 — The current security context cannot be reverted using this statement. A cookie may or may not be needed with 'Revert' statement depending on how the c…
- 15592 — Cannot unset application role because none was set or the cookie is invalid.
- 15593 — An error occurred while decrypting the password for linked login '%.*ls' that was encrypted by the old master key. The error was ignored because the F…
- 15594 — The password is already provisioned for the database '%.*ls'
- 15595 — The password cannot be dropped because it is not provisioned for the database '%.*ls'
- 15596 — Warning: use of a UNIQUE index, PRIMARY KEY constraint, or UNIQUE constraint on a table with row-level security can allow information disclosure.
- 15597 — Warning: use of an IDENTITY column on a table with row-level security can allow information disclosure.
- 15598 — Warning: use of an indexed view on a table with row-level security can allow information disclosure.
- 15599 — Auditing and permissions can't be set on local temporary objects.
- 15600 — An invalid parameter or option was specified for procedure '%s'.
- 15601 — Full-Text Search is not enabled for the current database. Use sp_fulltext_database to enable Full-Text Search. The functionality to disable and enable…
- 15612 — DBCC DBCONTROL error. Database was not made read-only.
- 15615 — DBCC DBCONTROL error. Database was not made single user.
- 15622 — No permission to access database '%s'.
- 15625 — Option '%ls' not recognized for '%ls' parameter.
- 15626 — You attempted to acquire a transactional application lock without an active transaction.
- 15627 — sp_dboption command failed.
- 15635 — Cannot execute '%ls' because the database is in read-only access mode.
- 15645 — Column '%ls' does not exist.
- 15646 — Column '%ls' is not a computed column.
- 15647 — No views with schema binding reference table '%ls'.
- 15650 — Updating %s
- 15651 — %d index(es)/statistic(s) have been updated, %d did not require update.
- 15652 — %s has been updated...
- 15653 — %s, update is not necessary...
- 15654 — Table %s: cannot perform the operation on the table because its clustered index is disabled.
- 15656 — Cannot create user defined types from XML data type.
- 15657 — Vardecimal storage format is not available in system database '%s'.
- 15658 — Cannot run sp_resetstatus against a database snapshot.
- 15659 — The schema '%ls' specified for parameter schema_name does not exist.
- 15660 — Compressing XML, spatial, columnstore or hash indexes is not supported by the stored procedure sp_estimate_data_compression_savings.
- 15661 — Compressing temporary tables is not supported by the stored procedure sp_estimate_data_compression_savings.
- 15662 — Compressing tables with sparse columns or column sets is not supported by the stored procedure sp_estimate_data_compression_savings.
- 15663 — Feature "sp_addserver" is no longer supported. Replace remote servers by using linked servers.
- 15664 — Cannot set key '%ls' in the session context. The key has been set as read_only for this session.
- 15665 — The value was not set for key '%ls' because the total size of keys and values in the session context would exceed the 1 MB limit.
- 15666 — Cannot set key '%ls' in the session context. The size of the key cannot exceed 256 bytes.
- 15667 — Reset session context is not allowed when a another batch is active in session.
- 15668 — No edge constraints reference table '%ls', or you do not have permissions on referencing tables.
- 15701 — Statement '%.*ls' failed, because it attempted to set the Automatic Tuning option '%.*ls' multiple times.
- 15702 — Cannot perform action because Automatic Tuning cannot be enabled on system database %.*ls.
- 15703 — Setting Automatic Tuning option '%.*ls' to %.*ls for database '%.*ls'.
- 15704 — Automatic Tuning option '%.*ls' is disabled by system.
- 15705 — Automatic Tuning option %.*ls cannot be enabled, because Query Store is not turned on.
- 15706 — Automatic Tuning option %.*ls cannot be enabled, because Query Store is in READ_ONLY mode.
- 15707 — Automatic Tuning is only available for enterprise customers.
- 15708 — Invalid automatic tuning option name.
- 15709 — Invalid automatic tuning option state.
- 15710 — Invalid database tuning mode string.
- 15711 — Cannot acquire shared lock over the database.
- 15712 — Invalid server tuning mode.
- 15713 — Cannot acquire update lock over the database.
- 15714 — Cannot execute stored procedure on this database type.
- 15715 — Setting Automatic Tuning option %.*ls to DEFAULT is not allowed while in CUSTOM database tuning mode for database %.*ls.
- 15716 — Only one Automatic Tuning option can be given in ALTER DATABASE statement.
- 15717 — Requested automatic tuning configuration is not supported or parameters are invalid.
- 15718 — Automatic tuning dependency not met (%ls).
- 15719 — User does not have necessary permissions (%ls) on current database to execute the stored procedure.
- 15720 — Setting Automatic Tuning option to DEFAULT is not allowed while in CUSTOM server tuning mode for server %.*ls.
- 15721 — Could not build Automatic Tuning's internal tables on database (ID %d).
- 15722 — Internal table access error: failed to access the Automatic Tuning internal table with HRESULT: 0x%x.
- 15723 — Failed to execute Automatic Tuning's stored procedure for error %d.
- 15724 — Failed to acquire RW lock for Automatic Tuning Agent scheduling for Error %d.
- 15725 — Automatic Tuning stored procedure's parameter %ls cannot be null.
- 15726 — Failed to execute Automatic Tuning's stored procedure for reason: %ls.
- 15801 — Initialization of external distributed computation library failed.
- 15802 — Request to perform an external distributed computation has failed with error "%s".
- 15803 — FORMATFILE option cannot be used to read distributed files. You can either remove it to try determining schema from data files, or use WITH clause of …
- 15804 — Could not load external library '%s'.
- 15805 — An error occurred while calling to external library '%ls'. HRESULT = '0x%x'.'
- 15806 — Statement ID: %s | Query hash: %s | Distributed request ID: %s
- 15807 — Provided statement is not supported.
- 15808 — Schema cannot be determined from data files for file format '%.*ls'. Please use WITH clause of OPENROWSET to define schema.
- 15809 — No files found matching the name pattern(s) '%ls'.
- 15810 — Error trying to retrieve schema from the data file '%.*ls'. Make sure the file matches the '%.*ls' format.
- 15811 — No columns found in the data file '%ls'.
- 15812 — Number of columns in the data file '%ls' exceeds the maximum of %d.
- 15813 — Error reading external file: '%s'.
- 15814 — Column '%s' of type '%s' is not compatible with external data type '%s'.
- 15815 — External data type '%s' is currently not supported.
- 15816 — Query shape is not supported.
- 15817 — This stored procedure is available only in Polaris.
- 15818 — %.*ls input argument should be a query text in the following form: 'SELECT col FROM OPENROWSET(BULK)'.%hs%hs
- 15819 — File statistics encountered an error with global statistics table. Table does not exist or it is corrupted.
- 15820 — File statistics for column '%.*ls' cannot be dropped because they do not exist. Please, correct sp_drop_file_statistics OPENROWSET query argument to m…
- 15821 — File statistics for column '%.*ls' cannot be created because they already exist.
- 15822 — An internal error occurred.
- 15823 — The filepath function requires 0 arguments or exactly 1 constant integer value argument.
- 15824 — Filepath function argument(s) out of range.
- 15825 — Filepath function prefix '%s' does not match the alias name or function argument is out of range.
- 15826 — Filename function prefix '%s' does not match the alias name.
- 15827 — The filename function requires 0 arguments.
- 15828 — The filepath function requires 0 to 1 arguments.
- 15829 — The name, '%s', is invalid. The prefix 'RESOLVED_WILDCARD_VIRTUAL_COLUMN_' is reserved.
- 15830 — Provided expression does not match any known RWVC.
- 15831 — File statistics for column '%.*ls' do not exist. Please, correct sp_show_file_statistics OPENROWSET query argument to make sure that you specify the s…
- 15832 — Internal error number %d encountered while creating statistics.
- 15833 — Create/drop/show stats operations are currently not supported for queries that use schema inference.
- 15834 — %.*ls input argument should be a query text in the following form: 'SELECT col FROM OPENROWSET(BULK)'. The query binding failed, please check for synt…
- 15835 — %.*ls input argument should be a query text in the following form: 'SELECT col FROM OPENROWSET(BULK)'. The query must project exactly one OPENROWSET c…
- 15836 — %.*ls input argument should be a query text in the following form: 'SELECT col FROM OPENROWSET(BULK)'. Detected unexpected operator: %hs
- 15837 — %.*ls input argument should be a query text in the following form: 'SELECT col FROM OPENROWSET(BULK)'. The data source must be read using OPENROWSET B…
- 15838 — Cannot create stats for the OPENROWSET query because of the hash collision. Stats table entry with hash %s already exists. Please modify your query an…
- 15839 — '%ls' is not supported by data_export.
- 15840 — External table location must be a folder. Location provided: '%ls'
- 15841 — External table location cannot contain wildcard characters. Location provided: '%ls'
- 15842 — Cannot create external table. External table location already exists. Location provided: '%ls'
- 15843 — An error occurred while processing file '%ls'. HRESULT = '0x%x'.
- 15844 — Data type '%s' is currently not supported.
- 15845 — Data type '%s' is not supported.
- 15846 — Multi-column statistics are not supported.
- 15847 — INCREMENTAL, MAXDOP, SAMPLE x ROWS options, and filter clause are not supported statistics options.
- 15848 — Cannot complete the sp_set_data_processed_limit stored procedure. Invalid limit value is specified. As a valid value should be considered anything bet…
- 15849 — ERRORFILE path exceeds limit of %d characters.
- 15850 — Warning: Ignored empty matched file '%ls'.
- 15851 — Cannot open external file storage.
- 15852 — External table statistics could not be found.
- 15853 — Invalid or unknown format type '%.*ls'.
- 15854 — More than %d wildcard characters present in path '%ls'.
- 15855 — Data conversion error (overflow) for column '%ls' in data file/external_table_name '%ls'.
- 15856 — I/O operation against '%ls' failed (details: {Operation = '%ls', HRESULT = '%ls'}).
- 15857 — Precision loss occurred for '%ls' in column '%ls'. Set NUMERIC_ROUNDABORT to OFF to ignore the precision loss.
- 15858 — Cannot obtain AAD token to access storage. Error message: '%ls'.
- 15859 — Cannot create external table. Provided storage type is not supported for CETAS.
- 15860 — External table location path is not valid. Location provided: '%ls'
- 15861 — Cannot create statistics on lob type column.
- 15862 — The underlying files are updated while the query is running. Remove ALLOW_INCONSISTENT_READ option from '%ls' if you need to have consistent results.
- 15863 — Cannot create statistics on partition column.
- 15864 — Openrowset statistics for specified openrowset source do not exist. Please, correct '%.*ls' OPENROWSET query argument to make sure that you specify go…
- 15865 — Multiple logical file paths are not allowed.
- 15866 — Inferring external table schema is not supported for given format type.
- 15867 — Binding by name is not supported for file format '%.*ls'. Please remove any JSON path mappings from WITH schema column definitions.
- 15868 — %ls is not supported.
- 15869 — %ls is not supported for %ls.
- 15870 — Objects of type %ls are not supported.
- 15871 — %ls '%ls' is not supported.
- 15872 — %ls is not allowed for external table columns.
- 15873 — Table hint %ls is not allowed.
- 15874 — Query hint %ls is not allowed.
- 15875 — Operation %ls is not allowed for a replicated database.
- 15876 — Queries are not supported in the conditions of %ls statements.
- 15877 — %ls type of a column %ls is not allowed as a column type when executing CREATE EXTERNAL TABLE AS SELECT.
- 15878 — Partitioned tables are not supported.
- 15879 — Providing both %ls and %ls is not supported.
- 15880 — Cannot execute %ls over multiple databases.
- 15881 — GEODR options are not allowed in ALTER DATABASE statements.
- 15882 — %ls operation is not allowed for this type of table.
- 15883 — Access check for '%ls' operation against '%ls' failed with HRESULT = '0x%x'.
- 15884 — Distributed query timeout expired. The timeout period elapsed prior to completion of the distributed operation.
- 15885 — Statement ID: %s | Query hash: %s | Distributed request ID: %s. Total size of data scanned is %I64u megabytes, total size of data moved is %I64u megab…
- 15886 — Non-recoverable IO failure has occurred targeting '%ls' (details: {Operation = '%ls', HRESULT = '%ls'}).
- 15887 — USE statement does not support switching to '%ls' database.
- 15888 — USE statement does not support switching to '%ls' database. Use a new connection to connect to '%ls' database.
- 15889 — Three-part names are not supported from '%ls' database to '%ls' database.
- 15890 — DATA_SOURCE option is temporary disabled.
- 15891 — Internal error in sp_executesql_metrics. Unable to serialize aggregated metrics to the JSON format (HRESULT = '0x%x').
- 15892 — Stored procedure %.*ls is not supported.
- 15893 — Resolving CosmosDB path has failed with error '%s'.
- 15894 — There was an error in CosmosDB connection string '%s'.
- 15895 — Stored procedure '%ls' cannot be executed on master database.
- 15896 — %ls is not supported in %ls database.
- 15897 — Column name is missing or doesn't match columns in the CosmosDB: '%s'.
- 15898 — Exporting LOB value failed.
- 15899 — Export failed. Maximum LOB value size ('%ls') has been exceeded.
- 15901 — Query not supported: Cannot determine result column sources.
- 15902 — Query not supported: Cannot determine result column sources.
- 15903 — Query not supported: Cannot determine result column sources.
- 15904 — Query not supported: Cannot determine result column sources.
- 15905 — Query not supported: Cannot determine result column sources. Invalid metadata.
- 16001 — Data masking is not supported for the data type of column '%.*ls'.
- 16002 — Invalid data masking function in column '%.*ls'.
- 16003 — The data type of column '%.*ls' does not support data masking function '%.*ls'.
- 16004 — Incorrect number of parameters for data masking function '%.*ls' for column '%.*ls'.
- 16005 — Invalid argument for data masking function '%.*ls' for column '%.*ls'.
- 16006 — Invalid data masking format for function '%.*ls' in column '%.*ls'.
- 16007 — The column '%.*ls' does not have a data masking function.
- 16008 — Cannot add a masking function to a column that is encrypted.
- 16009 — Cannot add a masking function to a column used as a sparse column set.
- 16010 — External script cannot be executed on masked data columns.
- 16011 — The data masking function for column '%.*ls' is too long.
- 16012 — The query accessed too many different databases.
- 16013 — Cannot add a masking function to a column used in a key to a fulltext index.
- 16014 — Failed to create fulltext index because key column '%.*ls' has a masking function defined on it.
- 16015 — The index on view '%.*ls' cannot be created because the view is referencing table '%.*ls' with masked columns.
- 16016 — Cannot add a masking function to a column used in a sparse column set.
- 16017 — The query used too many masked sources.
- 16018 — An error occurred while applying the regexp_replace data masking function on column '%.*ls'.
- 16101 — Option '%.*ls' is not supported for sensitivity classification.
- 16102 — Object name specified '%.*ls' is not valid.
- 16103 — Sensitivity classification is not supported for the specified object.
- 16104 — Sensitivity classification option '%.*ls' was repeated.
- 16105 — Option '%.*ls' is too long (max %d chars).
- 16106 — Option '%.*ls' is empty.
- 16107 — Schema '%.*ls' was not found or you do not have permission to access it.
- 16108 — Table '%.*ls' was not found or you do not have permission to access it.
- 16109 — Column '%.*ls' was not found in table '%.*ls' or you do not have permission to access it.
- 16110 — Specification of database part of object name is not supported.
- 16111 — Sensitivity classification operations cannot be used on computed column '%.*ls'.
- 16112 — Sensitivity classifications cannot be added to a history table directly.
- 16113 — Sensitivity rank must not be provided as string.
- 16114 — Sensitivity rank must be one of the following: NONE, LOW, MEDIUM, HIGH, CRITICAL.
- 16115 — '%.*ls' option's value must be provided as string.
- 16116 — Object '%.*ls' is not a table.
- 16200 — The statement failed because 'APPROX_COUNT_DISTINCT' does not support DISTINCT <column-name> parameters. Consider using 'APPROX_COUNT_DISTINCT' withou…
- 16201 — The statement failed because '%.*ls' does not support DISTINCT <column-name> parameters.
- 16202 — Keyword or statement option '%.*ls' is not supported on the '%.*ls' platform.
- 16203 — The option "INLINE=ON" is not valid for this function. Check the documentation for the constructs supported with INLINE option in a function.
- 16204 — Invalid column ordinal provided for column %d. Column ordinal has to be greater than zero.
- 16205 — Invalid read length provided in OPENROWSET query. Length has to be greater than zero.
- 16206 — Only 'CELL_MAPPING' can be specified as a table-level JSON hint.
- 16207 — Invalid PLAN PER VALUE hint definition.
- 16208 — The function '%.*ls' does not support %.*ls.
- 16209 — The PARTITION=ALL clause must be specified to enable XML compression for the table or index.
- 16210 — Invalid xml compression setting for columnstore index '%.*ls'.
- 16211 — Cannot repeat window name in the WINDOW clause.
- 16212 — The function '%.*ls' expects parameter %.*ls at position %d.
- 16213 — All parameters of '%.*ls' must be named.
- 16214 — Incorrect syntax near '%.*ls'. Nested CTE cannot be used in this query.
- 16215 — Conflicting Query Hints Detected The query contains conflicting hints that cannot be processed together: - FORCE SINGLE NODE PLAN - FORCE DISTRIBUTED …
- 16216 — Invalid column reference. Expressions are not allowed in the index definition.
- 16217 — Conflicting query hints and/or internal configuration settings forcing both single node and distributed plans were detected
- 16218 — '%.*ls' option is not supported when creating index on expression.
- 16219 — The option '%.*ls' must be specified. It is required for Create Vector Index.
- 16220 — The value for %.*ls is out of range. The value must be greater than or equal to %I64u and less than or equal to %I64u.
- 16221 — Invalid use of force|disallow local_global_gbagg hint.
- 16222 — LOADLARGEROWS query option hint is not supported.
- 16223 — The value for %.*ls is out of range. The value must be greater than or equal to %d and less than or equal to %d.
- 16224 — The value for %.*ls is out of range. The value must be either %d or between %d and %d, inclusive.
- 16225 — The value for %.*ls is out of range. The value must be greater than or equal to %f and less than or equal to %f.
- 16226 — ALTER DATABASE SET ENCRYPTION is not supported for this database. Manage data encryption at rest at the workspace level.
- 16228 — The value for %.*ls is out of range. The value must be greater than or equal to %.2f and less than or equal to %.2f.
- 16229 — LOB compression was specified for an index, table, or database where it is not supported.
- 16230 — In an ALTER TABLE REBUILD or ALTER INDEX REBUILD statement, when a partition is specified in a LOB_COMPRESSION clause, PARTITION=ALL must be specified…
- 16231 — The term '%.*ls' is not permitted in a merge replication subscriber information expression, because it carries the substitution token 'suser_sname' or…
- 16232 — Column '%.*ls' specified in the %.*ls clause does not exist in the source.
- 16233 — The %.*ls clause on '*' cannot exclude all columns. At least one column must remain in the result.
- 16234 — Duplicate column '%.*ls' specified in the %.*ls clause.
- 16235 — EXT_LOAD_ADJUST_MEMORY is not supported for this statement or input configuration.
- 16310 — '%.*ls' is not supported in this version of Azure SQL Edge.
- 16320 — '%.*ls' is not supported while the database is in Shared Data (SDA) cluster mode. Retry after the database exits cluster mode.
- 16401 — Page id not hosted by the current page server.
- 16501 — %ls is not supported with this set of options.
- 16502 — Cannot execute stored procedure '%ls'. The security check for the current user is failing. Only members of the sysadmin role can perform this operatio…
- 16503 — Cannot complete the sp_set_data_processed_limit stored procedure. Invalid type is specified. Valid values are: daily, weekly and monthly.
- 16504 — Query is rejected because SQL Serverless budget limit for a period is exceeded. (Period = %s: Limit = %lu TB, Data processed = %lu TB)
- 16505 — EXTERNAL FILE FORMAT '%ls' has FORMAT_TYPE = %ls which is not supported by CREATE EXTERNAL TABLE AS SELECT statement.
- 16506 — The column name starting with '%.*ls' is too long. The maximum length is %d characters. File: '%ls'.
- 16507 — String or binary data would be truncated while reading column of type '%ls'. Check ANSI_WARNINGS option. File/External table name '%ls', column '%ls'.…
- 16508 — Error converting values NaN or Infinity to type '%ls'. NaN and Infinity are not supported. File/External table name '%ls', column '%ls', value '%ls'. …
- 16509 — Arithmetic overflow error converting '%ls' to data type '%ls'. File/External table name '%ls', column '%ls', value '%ls'. Check ANSI_WARNINGS, ARITHAB…
- 16510 — Persisting distributed query history into %ls table failed. Table does not exists or it is corrupted.
- 16511 — Persisting distributed query history into %ls table failed. Command '%ls' failed.
- 16512 — Resolving Delta logs on path '%ls' failed with error: There are null fields in file/schema resolution.
- 16513 — Error reading external metadata.
- 16514 — Resolving Delta logs on path '%ls' failed with error: Cannot parse json object from log folder.
- 16515 — Resolving Delta logs on path '%ls' failed with error: Cannot find value of partitioning column '%.*ls' in file '%ls'.
- 16516 — Resolving Delta logs on path '%ls' failed with error: Wildcard in table path is not supported.
- 16517 — Resolving Delta logs on path '%ls' failed with error: Could not the find expected number of log files.
- 16518 — Resolving Delta logs on path '%ls' failed with error: Cannot parse field field '%ls' in json object.
- 16519 — Resolving Delta logs on path '%ls' failed with error: Provider type '%.*ls' is not supported.
- 16520 — Resolving Delta logs on path '%ls' failed with error: Partitioning column '%.*ls' not found in inferred or provided schema.
- 16521 — Resolving Delta logs on path '%ls' failed with error: Schema inference failed to parse type '%ls'.
- 16522 — %.*ls input argument should be a OPENROWSET BULK query which uses external extraction.
- 16523 — Execution service has shut down so performing distributed computation cannot be executed unless SQL is restarted
- 16524 — Master Key for CosmosDb collection %ls was not specified.
- 16525 — Failed to enqueue system background tasks during SQL server startup.
- 16526 — Terminating the %ls system task because of unrecoverable exception.
- 16527 — Type %ls of partition column %.*ls is not supported for external tables.
- 16528 — Operation '%ls %ls' failed. Retry the operation later.
- 16529 — IO operation failed during processing '%ls' in file '%ls' with error : '%ls'.
- 16530 — IO operation failed during processing file '%ls' with error : '%ls'.
- 16531 — Budget limit cannot be changed. Condition that must be satisfied: daily limit <= weekly limit <= monthly limit.
- 16532 — Cannot explicitly reference delimited text file columns by name unless OPENROWSET option HEADER_ROW is set to TRUE.
- 16533 — Error classification failed due to internal error, please contact support.
- 16534 — Cannot create or alter database.
- 16535 — Cannot bulk load. The file "%ls" does not exist or you don't have file access rights.
- 16536 — Cannot bulk load because the file "%ls" could not be opened.
- 16537 — Openrowset statistics are not supported on %ls.
- 16538 — You do not have required permission to execute '%ls'.
- 16539 — Operation failed since the external data source '%ls' has underlying storage account that is not in the list of Outbound Firewall Rules on the server.…
- 16540 — Session context is not supported in distributed query execution.
- 16541 — A %ls with the name "%ls" already exists. Use a different name for resource.
- 16542 — %ls option is not supported.
- 16543 — %ls is not supported for specified file format.
- 16544 — The maximum reject threshold is reached.
- 16545 — Warning: Rejected rows encountered during execution.
- 16546 — Queries referencing variables are not supported in distributed processing mode.
- 16547 — CosmosDb query does not support given bulk options.
- 16548 — Credential with name '%.*ls' has not been found or you do not have the permission to access it.
- 16549 — Values in column %ls are formatted as JSON objects and cannot be written using CREATE EXTERNAL TABLE AS SELECT statement. Convert %ls column to a sing…
- 16550 — EXECUTE %ls. Warning: Stored procedures cannot be permanently stored in master database. Script procedure and create it in other database.
- 16551 — Bulk load data conversion error (truncation);%I64d;%d;%ls;%ls;%d;%ls.
- 16552 — Data conversion error (type mismatch or invalid character for the specified codepage);%I64d;%d;%ls;%ls;%d;%ls.
- 16553 — Bulk load data conversion error (overflow);%I64d;%d;%ls;%ls;%d;%ls.
- 16554 — Operation failed due to an error in a background task. Please retry the operation. If the problem persists contact Microsoft Azure Customer Support.
- 16555 — Operation failed due to an error while processing rejected rows. Intermediate results, if any, should be discarded as such results may not be complete…
- 16556 — Operation for removing intermediate results failed while processing rejected rows. Intermediate results, if any, should be manually deleted.
- 16557 — Potential conversion error while reading VARCHAR column '%.*ls' from UTF8 encoded text. Change database collation to a UTF8 collation or specify expli…
- 16558 — Potential conversion error while reading VARCHAR column '%.*ls' from UTF8 encoded text. Change database collation to a UTF8 collation or specify expli…
- 16559 — CODEPAGE different than 65001 is not supported when CSV 2.0 is specified.
- 16560 — Column '%s' of type '%s' is not compatible with external data type '%s', please try with '%s'. File/External table name: '%ls'.
- 16561 — External table '%ls' is not accessible because content of directory cannot be listed.
- 16562 — External table '%ls' is not accessible because location does not exist or it is used by another process.
- 16563 — Format type '%.*ls' already exists.
- 16564 — Parser version '%.*ls' for format type '%.*ls' already exists.
- 16565 — CREATE DATABASE failed. User database limit has been already reached (%d).
- 16566 — A path in the Openrowset function cannot be empty.
- 16567 — Format '%.*ls' does not support extraction of file metadata only.
- 16568 — Output path for rejected rows is too long. Max length of the path is nvarchar(260).
- 16569 — Output path for rejected rows is too long. Max length of the path is nvarchar(1024).
- 16570 — Use a collation that enables string predicate pushdown and file elimination on storage layer.
- 16571 — Unable to retrieve user token details for external computation.
- 16572 — Parser version '%.*ls' for format type '%.*ls' does not exist.
- 16573 — Some info messages might been dropped.
- 16574 — Query execution is canceled. Operation for removing intermediate results while processing rejected rows did not perform. Intermediate results, if any,…
- 16575 — Arithmetic overflow error converting a value to data type '%ls'. File/External table name '%ls', column '%ls'. Please try with '%ls'.
- 16576 — Location provided by DATA_SOURCE '%.*ls' cannot contain any wildcards.
- 16577 — Number of wildcards in LOCATION must match the number of columns in PARTITION clause.
- 16578 — The column name '%.*ls' specified in the PARTITION option does not match any column specified in the columns list.
- 16579 — A column has been specified more than once in the PARTITION list. Column '%.*ls' is specified more than once.
- 16580 — Openrowset is not supported.
- 16581 — Cannot parse table options: %ls
- 16582 — Internal error led to query cancellation: [Diagnostics: '%.*ls']
- 16583 — The query must contain no more than %.*ls OPENROWSET columns.
- 16584 — Column '%ls' contains NULL values and cannot be used as PARTITION column.
- 16585 — Column '%ls' contains path delimiter and cannot be used as PARTITION column. The actual value is '%ls'.
- 16586 — Number of partition columns exceeds the maximum number of partition columns allowed which is %d.
- 16587 — Number of created partitions exceeds the limit. There are more than %d files created.
- 16588 — Virtual or partition columns found in Delta external table.
- 16589 — Virtual or partition columns not supported for Delta external table.
- 16590 — Invalid list of columns in PARTITION option. Only columns that expose wildcards are allowed and all such columns need to be listed.
- 16591 — Multiple logical file paths limit has been reached. Statement contains %ld logical file paths, maximum allowed limit is %d.
- 16592 — Warning: Unable to resolve path %ls. Error number %ld, Level %ld, State %ld, Message "%ls".
- 16593 — Warning: Maximum number of warnings reached (%ld). Please try resolving warnings and resubmit the query.
- 16594 — Path '%ls' was referenced multiple times in result set '%ls'.
- 16595 — Database name '%ls' is reserved. Choose a different database name.
- 16596 — The specified location is invalid: '%ls'.
- 16597 — The specified storage account does not have hierarchical namespace enabled.
- 16598 — Cannot access the specified location '%ls', because it does not exist or you do not have permission.
- 16599 — An error occurred while attempting to delete the specified location '%ls' (HRESULT = '0x%x').
- 16600 — Invalid or unknown dateformat '%.*ls'.
- 16601 — Credential of database '%ls' are invalid.
- 16602 — Cannot delete sync agent '%ls' because it is used by sync member '%ls'.
- 16603 — Cannot add database '%ls' into sync group because the database name is invalid.
- 16604 — Hub database '%ls' is invalid.
- 16605 — Member database '%ls' is invalid.
- 16606 — Database '%ls' cannot be deleted because it is used as a sync metadata database which still contains sync groups and/or sync agents.
- 16607 — Sync metadata database '%ls' is invalid.
- 16608 — Cannot create or update sync group because the sync group name '%ls' is invalid.
- 16609 — Cannot create or update sync group '%ls' because the conflict resolution policy is invalid.
- 16610 — Cannot create sync group because the sync group name '%ls' is used.
- 16611 — Cannot create or update sync group '%ls' because the sync schema contains circular reference.
- 16612 — Cannot create or update sync group '%ls' because the table '%ls' in sync schema contains no clustered index.
- 16613 — Cannot delete sync group '%ls' because the sync group is syncing.
- 16614 — Cannot create or update sync group '%ls' because database '%ls' is invalid.
- 16615 — Cannot create or update sync group '%ls' because the sync interval is invalid.
- 16616 — Cannot update sync schema because the data type change is not supported.
- 16617 — Sync group '%ls' is not ready to update sync schema because there are some ongoing operations on the sync group.
- 16618 — Cannot update sync schema because some columns are missing in database '%ls'.
- 16619 — Cannot update sync schema because some tables are missing in database '%ls'.
- 16620 — Cannot update sync schema because the format of sync schema is invalid.
- 16621 — Sync group '%ls' is not in active state. Make sure the sync schema of it is set.
- 16622 — Hub database '%ls' is suspended because the credential of it is invalid.
- 16623 — Sync group '%ls' is invalid.
- 16624 — Cannot create or update sync member because the sync member name '%ls' is invalid.
- 16625 — Cannot create or update the sync member '%ls' because the database type '%ls' provided is invalid.
- 16626 — Cannot create or update the sync member '%ls' because the sync direction '%ls' provided is invalid.
- 16627 — Cannot create or update the sync member '%ls' because the sync agent '%ls' provided is invalid.
- 16628 — Cannot create or update the sync member '%ls' because the SQL Server database ID '%ls' provided is invalid.
- 16629 — Cannot create sync member because the sync member name '%ls' provided is used.
- 16630 — Cannot create sync member '%ls' because the database '%ls' provided is already added as a sync member.
- 16631 — Cannot delete sync member '%ls' when it is syncing.
- 16632 — Sync member '%ls' is invalid.
- 16633 — Cannot create sync agent because the sync agent name '%ls' provided is used.
- 16634 — Sync agent '%ls' is invalid.
- 16635 — Cannot create sync group '%ls' because the maximum number of sync groups can be created is %d.
- 16636 — Cannot create sync member '%ls' because the maximum number of sync members can be created in a sync group is %d.
- 16637 — Cannot create or update sync group '%ls' because the maximum count of tables in sync schema is %d.
- 16638 — Cannot create or update sync group '%ls' because the table '%ls' in sync schema contains no primary key.
- 16639 — Cannot create or update sync group '%ls' because the sync schema provided contains unsupported column data type.
- 16640 — Cannot refresh schema of the database '%ls'.
- 16641 — Cannot create sync agent '%ls' under a different SQL Server than the one of sync metadata database.
- 16642 — Conflict logging retention period parameter is required if conflict logging is turned on.
- 16643 — Data Sync conflict logging feature is not enabled.
- 16644 — Value for data Sync conflict logging retention in days should be positive or zero.
- 16645 — The sync group is already being dropped.
- 16646 — The sync member is already being dropped.
- 16647 — Failed to perform data sync operation: %ls
- 16648 — The sync database specified (%ls\%ls) does not match the existing sync database (%ls\%ls).
- 16649 — Hub logical server %ls does not exist.
- 16650 — The sync agent %ls already exists.
- 16651 — The sync agent with the id %ls already exists.
- 16652 — Cannot update the sync group because it is currently being dropped.
- 16653 — Cannot use datawarehouse edition in data sync.
- 16654 — Cannot use logical master in data sync.
- 16655 — Cannot add column '%ls' from table '%ls' to schema because the data type of this column is '%ls'.
- 16656 — Please specify only one user managed identity per sync group or member.
- 16657 — Data Sync does not support NSP: %ls
- 16658 — Data Sync internal error: %ls
- 16659 — Data Sync doesn't support on-premises sync members to be on sync group with User Assigned Managed Identity: %ls
- 16660 — Sync Group operation is denied for subscription %ls. SQL Data Sync is retiring. Please contact customer support.
- 16701 — A conflict operation on this LTR backup is still in progress.
- 16702 — LTR backup migration %ls feature is not supported on subscription '%ls'.
- 16703 — Copy LTR backup from source subscription '{0}' to target subscription '{1}' is not allowed.
- 16704 — A required parameter was not provided for LTR backup %ls operation. Missing parameter '%ls'
- 16705 — LTR Copy feature is not supported to copy LTR backups within same server.
- 16706 — LTR backup specified for LTR backup %ls operation does not exists.
- 16707 — Target server '%ls' not found or is not ready for LTR backup copy operation.
- 16708 — Target Database '%ls' not found on server '%ls' for LTR backup copy operation.
- 16709 — Failed to start LTR backup copy request in target region.
- 16710 — Specified Backup Storage Redundancy '%ls' is not supported in target region.
- 16711 — Active backup redundancy '%ls' of database '%ls' does not match the requested backup redundancy of LTR backup '%ls'.
- 16712 — LTR Migration requests are not supported for databases of type '%ls'.
- 16713 — Another LTR backup with same backup time for target database.
- 16714 — Copy operation failed for LTR backup blobs.
- 16715 — Restore verification failed after max attempts were reached. Last failure reason: %ls
- 16716 — Restore verification failed. Failure reason: %ls
- 16717 — LTR backup specified for LTR backup %ls operation does not exists.
- 16718 — Another LTR backup exist with same backup time for target database.
- 16719 — Changing backup storage redundancy is not allowed for LTR Copy operations.
- 16720 — LTR Backup Copy/Storage Update feature is not supported for Hyperscale Database LTR Backups currently.
- 16721 — LTR Migration not supported between source and target database with different is_ledger_on property.
- 16722 — Cannot change service objective for %ls to %ls as long-term retention is not supported yet on Hyperscale. Please disable long-term retention on the da…
- 16723 — An error has occurred while enabling Long-term backup retention for this database. Please reach out to Microsoft support to enable long-term backup re…
- 16724 — The long-term retention backup with the desired storage access tier already exists.
- 16725 — Restoring archived long-term retention backup is not supported. Restore can be performed only on rehydrated or regular long-term retention backups.
- 16726 — Archiving long-term retention backups on zone redundant backup storage is not supported. Use locally redundant or geo-redundant storage types instead.
- 16727 — Archiving long-term retention backups is not enabled.
- 16728 — Archiving long-term retention backups on Hyperscale databases is not enabled.
- 16729 — ChangeLongTermRetentionBackupAccessTier is not supported for the desired (%ls, %ls) combination. Only (Archive, Move) and (Hot, Copy) are allowed.
- 16730 — Setting a long-term retention policy with the backup storage access tier set to 'archive' is not supported on zone-redundant backup storage. Use eithe…
- 16731 — Updating the backup storage redundancy type to zone-redundant storage is not supported when a long-term retention policy with the 'archive' backup sto…
- 16732 — The subscription ID is required to update the long-term retention backup.
- 16733 — The server name is required to update the long-term retention backup.
- 16734 — The database name is required to update the long-term retention backup.
- 16735 — The provided long-term retention backup resource ID or backup name is incorrect.
- 16736 — The server cannot be dropped due to active immutable LTR backups, or an LTR policy with locked immutability.
- 16737 — The server cannot be dropped because it still has active LTR backups and is currently protected by a Network Security Perimeter.
- 16901 — %hs: This feature has not been implemented yet.
- 16902 — %ls: The value of the parameter %ls is invalid.
- 16903 — The "%ls" procedure was called with an incorrect number of parameters.
- 16904 — sp_cursor: optype: You can only specify ABSOLUTE in conjunction with DELETE or UPDATE.
- 16905 — The cursor is already open.
- 16906 — Temporary storage used by the cursor to store large object variable values referred by the cursor query is not usable any more.
- 16907 — %hs is not allowed in cursor statements.
- 16909 — %ls: The cursor identifier value provided (%x) is not valid.
- 16910 — The cursor %.*ls is currently used by another statement.
- 16911 — %hs: The fetch type %hs cannot be used with forward only cursors.
- 16914 — The "%ls" procedure was called with too many parameters.
- 16915 — A cursor with the name '%.*ls' already exists.
- 16916 — A cursor with the name '%.*ls' does not exist.
- 16917 — Cursor is not open.
- 16922 — Cursor Fetch: Implicit conversion from data type %s to %s is not allowed.
- 16924 — Cursorfetch: The number of variables declared in the INTO list must match that of selected columns.
- 16925 — The fetch type %hs cannot be used with dynamic cursors.
- 16926 — sp_cursoroption: The column ID (%d) does not correspond to a text, ntext, or image column.
- 16927 — Cannot fetch into text, ntext, and image variables.
- 16928 — sp_cursor: Exec statement is not allowed as source for cursor insert.
- 16929 — The cursor is READ ONLY.
- 16930 — The requested row is not in the fetch buffer.
- 16931 — There are no rows in the current fetch buffer.
- 16932 — The cursor has a FOR UPDATE list and the requested column to be updated is not in this list.
- 16933 — The cursor does not include the table being modified or the table is not updatable through the cursor.
- 16934 — Optimistic concurrency check failed. The row was modified outside of this cursor.
- 16935 — No parameter values were specified for the sp_cursor-%hs statement.
- 16936 — sp_cursor: One or more values parameters were invalid.
- 16937 — A server cursor cannot be opened on the given statement or statements. Use a default result set or client cursor.
- 16938 — sp_cursoropen/sp_cursorprepare: The statement parameter can only be a batch or a stored procedure with a single select, without FOR BROWSE, COMPUTE BY…
- 16941 — Cursor updates are not allowed on tables opened with the NOLOCK option.
- 16942 — Could not generate asynchronous keyset. The cursor has been deallocated.