错误码目录 / Microsoft SQL Server
Microsoft SQL Server 错误码目录 · 第 7 / 18 页
本页收录 Microsoft SQL Server 的 17,993 条错误码知识条目,每条均可打开独立详情页,包含错误说明、编号信息、官方文档与公开资料。
- 11244 — A corrupted message has been received. The handshake validation header is malformed.
- 11245 — A corrupted message has been received. The maximum number of private variable data elements (%d) has been exceeded. Private variable data elements fou…
- 11246 — A corrupted message has been received. The private variable data element (%d) has been duplicated in this message.
- 11247 — A corrupted message has been received. The login negotiate header is invalid.
- 11248 — A corrupted message has been received. The SSPI login header is invalid.
- 11249 — A corrupted message has been received. The pre-master-secret is invalid.
- 11250 — A corrupted message has been received. The security certificate key fields must both be present or both be absent. This occurred in the message with C…
- 11251 — A corrupted message has been received. The service pair security header source certificate and the signature must both be present or both be absent. T…
- 11252 — A corrupted message has been received. The destination certificate serial number is missing. This occurred in the message with Conversation ID '%.*ls'…
- 11253 — A corrupted message has been received. The service pair security header destination certificate, the key exchange key, the key exchange key ID, and th…
- 11254 — A corrupted message has been received. The session key ID is missing. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Me…
- 11255 — A corrupted message has been received. The encryption flag is set, however the message body, MIC or salt is missing. This occurred in the message with…
- 11256 — A corrupted message has been received. The MIC is present, however the message body or encryption flag is missing. This occurred in the message with C…
- 11257 — A corrupted message has been received. The MIC and session key ID are in an invalid state. This occurred in the message with Conversation ID '%.*ls', …
- 11258 — A corrupted message has been received. The MIC size is %d, however it must be no greater than %d bytes in length. This occurred in the message with Co…
- 11259 — A corrupted message has been received. The certificate serial number size is %d, however it must be no greater than %d bytes in length. This occurred …
- 11260 — A corrupted message has been received. The certificate issuer name size is %d, however it must be no greater than %d bytes in length. This occurred in…
- 11261 — A corrupted message has been received. The destination certificate serial number size is %d, however it must be no greater than %d bytes in length. Th…
- 11262 — A corrupted message has been received. The destination certificate issuer name size is %d, however it must be no greater than %d bytes in length. This…
- 11263 — A corrupted message has been received. The service pair security header size is %d, however it must be between %d and %d bytes. This occurred in the m…
- 11264 — A corrupted message has been received. The key exchange key size is %d, however it must be between %d and %d bytes. This occurred in the message with …
- 11265 — A corrupted message has been received. The key exchange key ID is invalid. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, a…
- 11266 — A corrupted message has been received. The encrypted session key size is %d, however it must be %d bytes. This occurred in the message with Conversati…
- 11267 — A corrupted message has been received. The session key ID size is %d, however it must be %d bytes. This occurred in the message with Conversation ID '…
- 11268 — A corrupted message has been received. The salt size is %d, however it must be %d bytes. This occurred in the message with Conversation ID '%.*ls', In…
- 11269 — A corrupted message has been received. A UNICODE string is not two byte aligned within the message. This occurred in the message with Conversation ID …
- 11270 — A corrupted message has been received. A UNICODE string is greater than the maximum allowed size of %d bytes. This occurred in the message with Conver…
- 11271 — A corrupted message has been received. The conversation ID must not be NULL. This occurred in the message with Conversation ID '%.*ls', Initiator: %d,…
- 11272 — A corrupted message has been received. The message ID must not be NULL.
- 11273 — A corrupted message has been received. The message body is not properly padded for encryption. This occurred in the message with Conversation ID '%.*l…
- 11274 — A corrupted message has been received. A sequence number is larger than allowed. This occurred in the message with Conversation ID '%.*ls', Initiator:…
- 11275 — A corrupted message has been received. The End of Conversation and Error flags are both set. This occurred in the message with Conversation ID '%.*ls'…
- 11276 — A corrupted message has been received. The End of Conversation flag has been set on an unsequenced message. This occurred in the message with Conversa…
- 11277 — A corrupted message has been received. The End of Conversation and Error flags may not be set in the first sequenced message. This occurred in the mes…
- 11278 — A corrupted message has been received. The message type is missing for this message. This occurred in the message with Conversation ID '%.*ls', Initia…
- 11279 — A corrupted message has been received. The message type must not be set in this message. This occurred in the message with Conversation ID '%.*ls', In…
- 11280 — A packet of size %lu bytes could not be processed because it exceeds the receive buffer count.
- 11281 — A corrupted message has been received. The private portion of the message header is malformed.
- 11282 — This message has been dropped due to licensing restrictions. See the documentation for further details.
- 11285 — This forwarded message has been dropped because the hops remaining count has reached 0.
- 11286 — Dropped this forwarded message because this SQL Server instance is out of memory.
- 11288 — This forwarded message has been dropped because a duplicate message is already being forwarded.
- 11289 — This forwarded message has been dropped because its memory usage would exceed the configured memory limit of %d bytes for forwarded messages.
- 11290 — This forwarded message was dropped because the message could not be delivered within the message time to live. This may indicate that the forwarding r…
- 11291 — This forwarded message has been dropped because the time consumed has exceeded the message's time to live of %u seconds (the message arrived with %u s…
- 11292 — The forwarded message has been dropped because a transport send error occurred when sending the message. Check previous events for the error.
- 11293 — This forwarded message has been dropped because a transport is shutdown.
- 11294 — This forwarded message has been dropped because the destination route is not valid.
- 11295 — Endpoint configuration change detected. Service Broker manager and transport will now restart.
- 11296 — Certificate change detected. Service Broker manager and transport will now restart.
- 11297 — A corrupted message has been received. The private variable data segment offset is incorrect.
- 11298 — A corrupted message has been received. The public variable data segment offset is incorrect.
- 11299 — A corrupted message has been received. An unsequenced message had a non-zero sequence number. This occurred in the message with Conversation ID '%.*ls…
- 11300 — Error wile committing a readonly or a TEMPDB XDES, Shutting down the server.
- 11301 — Error while performing transaction notification for object %p event %d.
- 11302 — Error during rollback. shutting down database (location: %d).
- 11303 — Error releasing reserved log space: %ls space %I64d, code %d, state %d.
- 11304 — Failed to record outcome of a local two-phase commit transaction. Taking database offline.
- 11306 — Forward progress on this transaction is disallowed. Transaction has been rolled back.
- 11313 — This operation must be executed within a parallel nested transaction.
- 11314 — The stored procedure %.*ls must be executed within a user transaction.
- 11315 — The isolation level specified for the PNT child transaction does not match the current isolation level for the parent.
- 11316 — %ls statement cannot be used inside a parallel nested transaction.
- 11317 — Parallel plan with updates is not supported inside a parallel nested transaction.
- 11318 — The stored procedure '%.*ls' cannot be executed through MARS connection.
- 11319 — Bound sessions and user parallel nested transactions cannot be used in the same transaction.
- 11320 — Cannot create a User Parallel Nested Transaction, the maximum number of parallel nested transactions is reached.
- 11321 — This operation cannot be executed within an active transaction.
- 11322 — Controlling explicit transactions and creating savepoints (BEGIN/SAVE/COMMIT/ROLLBACK TRANSACTION) is not supported inside ATOMIC blocks.
- 11323 — Memory-optimized tables and natively compiled modules cannot be used inside non-natively compiled ATOMIC blocks.
- 11324 — @@TRANCOUNT is not supported inside ATOMIC blocks.
- 11325 — Multiple Active Result Sets (MARS) and bound sessions are not supported inside ATOMIC blocks.
- 11326 — Transaction manager is not available during shutdown.
- 11327 — Global temporary tables cannot be accessed because the session's database is operating in Shared Data cluster mode. The current session will be termin…
- 11400 — ALTER TABLE SWITCH statement failed. Index '%.*ls' on indexed view '%.*ls' uses partition function '%.*ls', but table '%.*ls' uses non-equivalent part…
- 11401 — ALTER TABLE SWITCH statement failed. Table '%.*ls' is %S_MSG, but index '%.*ls' on indexed view '%.*ls' is %S_MSG.
- 11402 — ALTER TABLE SWITCH statement failed. Target table '%.*ls' is referenced by %d indexed view(s), but source table '%.*ls' is only referenced by %d index…
- 11403 — ALTER TABLE SWITCH statement failed. Indexed view '%.*ls' is not aligned with table '%.*ls'. The partitioning column '%.*ls' from the indexed view cal…
- 11404 — ALTER TABLE SWITCH statement failed. Target table '%.*ls' is referenced by %d indexed view(s), but source table '%.*ls' is only referenced by %d match…
- 11405 — ALTER TABLE SWITCH statement failed. Table '%.*ls' is not aligned with the index '%.*ls' on indexed view '%.*ls'. The table is partitioned on column '…
- 11406 — ALTER TABLE SWITCH statement failed. Source and target partitions have different values for the DATA_COMPRESSION option.
- 11407 — Vardecimal storage format can not be enabled for '%.*ls'. Only Enterprise edition of SQL Server supports vardecimal.
- 11408 — Cannot modify the column '%.*ls' in the table '%.*ls' to add or remove the COLUMN_SET attribute. To change a COLUMN_SET attribute of a column, either …
- 11409 — Cannot remove the column set '%.*ls' in the table '%.*ls' because the table contains more than 1025 columns. Reduce the number of columns in the table…
- 11410 — Cannot modify the column '%.*ls' in the table '%.*ls' to a sparse column because the column has a default or rule bound to it. Unbind the rule or defa…
- 11411 — Cannot add the sparse column '%.*ls' to the table '%.*ls' because the data type of the column has a default or rule bound to it. Unbind the rule or de…
- 11412 — ALTER TABLE SWITCH statement failed because column '%.*ls' does not have the same sparse storage attribute in tables '%.*ls' and '%.*ls'.
- 11413 — ALTER TABLE SWITCH statement failed because column '%.*ls' does not have the same column set property in tables '%.*ls' and '%.*ls'.
- 11414 — Warning: Option %ls is not applicable to table %.*ls because it does not have a clustered index. This option will be applied only to the table's noncl…
- 11415 — Object '%.*ls' cannot be disabled or enabled. This action applies only to foreign key and check constraints.
- 11418 — Cannot %S_MSG table '%.*ls' because the table either contains sparse columns or a column set column which are incompatible with compression.
- 11419 — Cannot alter or drop column '%.*ls' because the table '%.*ls' is federated on it.
- 11420 — ALTER TABLE SWITCH statement failed. Indexed view '%.*ls' references an object that does not participate in the ALTER TABLE SWITCH statement, therefor…
- 11421 — An '%.*ls' statement was executed on database '%.*ls', table '%.*ls' by hostname '%.*ls', host process ID %d using the WAIT_AT_LOW_PRIORITY options wi…
- 11422 — An ALTER TABLE SWITCH statement was executed on database '%.*ls', table '%.*ls' by hostname '%.*ls', host process ID %d with target table '%.*ls' usin…
- 11423 — User does not have permission to use the ABORT_AFTER_WAIT = BLOCKERS option.
- 11424 — Cannot alter the identity column '%.*ls' in the table '%.*ls' because this operation requires data modification and the table contains a persisted com…
- 11425 — Could not proceed with the DDL operation because it is referencing column '%.*ls' on table '%.*ls' and this conflicts with a concurrent column operati…
- 11426 — Cannot alter a column on a local temporary table online. Perform the alter operation offline.
- 11427 — The online ALTER COLUMN operation cannot be performed for table '%.*ls' because column '%.*ls' currently has or is getting altered into an unsupported…
- 11428 — Column '%.*ls' cannot be altered online to an XML type that has a schema collection. The operation must be performed offline.
- 11429 — The online ALTER COLUMN statement failed for table '%.*ls' because the table has change tracking enabled or is marked for merge replication. Disable c…
- 11430 — Cannot enable change data capture on column '%.*ls'. Change data capture is not supported for encrypted columns.
- 11431 — The %S_MSG option is not permitted as the %S_MSG option is not turned '%ls'.
- 11432 — %S_MSG = %d is not a valid value; %S_MSG must be greater than 0 and less than %d.
- 11433 — '%.*ls' with %S_MSG option is not suppported on %S_MSG '%.*ls'.
- 11434 — The %S_MSG option is not supported for the disabled index '%.*ls' on %S_MSG '%.*ls'.
- 11435 — The %S_MSG option is not supported for Heaps at %S_MSG '%.*ls'.
- 11436 — Cannot alter table '%.*ls' because non-nullable column '%.*ls' cannot be declared as hidden without either a DEFAULT constraint, the GENERATED ALWAYS …
- 11437 — Cannot alter table '%.*ls' because at least one column must be declared as non-hidden.
- 11438 — The %S_MSG option cannot be set to '%ls' when the %S_MSG option is set to '%ls'.
- 11439 — Resumable Online Index Build is not supported in tempdb.
- 11440 — The ALTER TABLE SWITCH statement failed because table '%.*ls' has ordered clustered columnstore index '%.*ls' and table '%.*ls' does not.
- 11441 — The ALTER TABLE SWITCH statement failed because table '%.*ls' and its ordered clustered columnstore index has ordered columns that do not match the or…
- 11442 — Columnstore index creation is not supported in tempdb when memory-optimized metadata mode is enabled.
- 11443 — The ALTER TABLE SWITCH statement is not supported between a distributed table and a non-distributed table.
- 11444 — The ALTER TABLE SWITCH statement failed because the distribution policy of the table '%.*ls' doesn't match the distribution policy of the table '%.*ls…
- 11445 — The ALTER TABLE SWITCH statement failed because the distribution key '%.*ls' of the table '%.*ls' doesn't match the distribution keys of the table '%.…
- 11446 — ALTER TABLE SWITCH statement failed. Source and target partitions have different values for the XML_COMPRESSION option.
- 11447 — The ALTER TABLE SWITCH statement failed because table '%.*ls' has %d distribution key(s) but table '%.*ls' has %d distribution keys.
- 11448 — Transaction with read committed snapshot isolation failed in database '%.*ls' because the object accessed by the statement has been modified by a DDL …
- 11449 — ALTER TABLE SWITCH statement failed because the table '%.*ls' has %S_MSG on it.
- 11450 — ALTER TABLE ALTER COLUMN failed to update column metadata for column '%.*ls'. Try again later.
- 11451 — ALTER TABLE SWITCH statement failed. Source and target partitions have different values for the LOB_COMPRESSION option.
- 11501 — The batch could not be analyzed because of compile errors.
- 11502 — The type for parameter '%.*ls' cannot be deduced in this context.
- 11503 — The parameter type cannot be deduced because a single expression contains two untyped parameters, '%.*ls' and '%.*ls'.
- 11504 — The discovered type with user type id %d in database %d is invalid.
- 11505 — The discovered type with the XML schema collection id %d in database %d is invalid.
- 11506 — The parameter type for '%.*ls' cannot be uniquely deduced; two possibilities are '%ls' and '%ls'.
- 11507 — The parameter type for '%.*ls' cannot be deduced because no type would make the query valid.
- 11508 — The undeclared parameter '%.*ls' is used more than once in the batch being analyzed.
- 11509 — The metadata could not be determined because the statement '%.*ls' is not compatible with the statement '%.*ls'.
- 11510 — The metadata could not be determined because the statement '%.*ls' in the main batch is not compatible with the statement '%.*ls' in procedure '%.*ls'…
- 11511 — The metadata could not be determined because the statement '%.*ls' in procedure '%.*ls' is not compatible with the statement '%.*ls' in the main batch…
- 11512 — The metadata could not be determined because the statement '%.*ls' in procedure '%.*ls' is not compatible with the statement '%.*ls' in procedure '%.*…
- 11513 — The metadata could not be determined because statement '%.*ls' contains dynamic SQL. Consider using the WITH RESULT SETS clause to explicitly describe…
- 11514 — The metadata could not be determined because statement '%.*ls' in procedure '%.*ls' contains dynamic SQL. Consider using the WITH RESULT SETS clause t…
- 11515 — The metadata could not be determined because statement '%.*ls' invokes a CLR procedure. Consider using the WITH RESULT SETS clause to explicitly descr…
- 11516 — The metadata could not be determined because statement '%.*ls' in procedure '%.*ls' invokes a CLR procedure. Consider using the WITH RESULT SETS claus…
- 11517 — The metadata could not be determined because statement '%.*ls' invokes a CLR trigger.
- 11518 — The metadata could not be determined because statement '%.*ls' in procedure '%.*ls' invokes a CLR trigger.
- 11519 — The metadata could not be determined because statement '%.*ls' invokes an extended stored procedure.
- 11520 — The metadata could not be determined because statement '%.*ls' in procedure '%.*ls' invokes an extended stored procedure.
- 11521 — The metadata could not be determined because statement '%.*ls' uses an undeclared parameter in a context that affects its metadata.
- 11522 — The metadata could not be determined because statement '%.*ls' in procedure '%.*ls' uses an undeclared parameter in a context that affects its metadat…
- 11523 — The metadata could not be determined because statement '%.*ls' causes indirect recursion.
- 11524 — The metadata could not be determined because statement '%.*ls' in procedure '%.*ls' causes indirect recursion.
- 11525 — The metadata could not be determined because statement '%.*ls' uses a temp table. Metadata discovery only supports temp tables when analyzing a single…
- 11526 — The metadata could not be determined because statement '%.*ls' in procedure '%.*ls' uses a temp table.
- 11527 — The metadata could not be determined because statement '%.*ls' does not support metadata discovery.
- 11528 — The metadata could not be determined because statement '%.*ls' in procedure '%.*ls' does not support metadata discovery.
- 11529 — The metadata could not be determined because every code path results in an error; see previous errors for some of these.
- 11530 — The metadata could not be determined because there are no code paths that reach the end of the batch.
- 11531 — The object id '%d' passed to sys.dm_exec_describe_first_result_set_for_object refers to an object which is not a T-SQL procedure or trigger.
- 11532 — The object id '%d' passed to sys.dm_exec_describe_first_result_set_for_object was invalid.
- 11533 — Type '%.*ls' is not a valid object name for result set definition.
- 11534 — Type '%.*ls' is invalid or not a table type.
- 11535 — EXECUTE statement failed because its WITH RESULT SETS clause specified %d result set(s), and the statement tried to send more result sets than this.
- 11536 — EXECUTE statement failed because its WITH RESULT SETS clause specified %d result set(s), but the statement only sent %d result set(s) at run time.
- 11537 — EXECUTE statement failed because its WITH RESULT SETS clause specified %d column(s) for result set number %d, but the statement sent %d column(s) at r…
- 11538 — EXECUTE statement failed because its WITH RESULT SETS clause specified type '%ls' for column #%d in result set #%d, and the corresponding type sent at…
- 11539 — One of the types specified in WITH RESULT SETS clause has been modified after the EXECUTE statement started running. Please rerun the statement.
- 11541 — sp_describe_first_result_set cannot be invoked when SET STATISTICS XML or SET STATISTICS PROFILE is on.
- 11542 — sp_describe_undeclared_parameters failed to discover parameter metadata for remote procedure call because parameters were passed by name and by name p…
- 11543 — SET STATISTICS XML ON and SET STATISTICS PROFILE ON are not allowed inside any procedure or batch that executes through an EXECUTE statement that has …
- 11544 — Could not deduce type for parameter in position '%d' for remote call to module '%.*ls'.
- 11545 — Remote result set discovery cannot be done inside SELECT INTO.
- 11546 — sp_showmemo_xml cannot run when the STATISTICS XML, STATISTICS PROFILE or SHOWPLAN set option is on. Set these options to OFF and re-run sp_showmemo_x…
- 11547 — Only one statement can be used as input parameter to sp_showmemo_xml. Modify the input parameter and re-run the stored procedure.
- 11548 — The stored procedure 'sp_showmemo_xml' is not available in this edition of SQL Server.
- 11549 — Using stored procedures is not supported. Modify the input parameter and re-run sp_showmemo_xml.
- 11550 — The metadata could not be determined because remote metadata discovery failed for statement '%.*ls'.
- 11551 — The metadata could not be determined because remote metadata discovery failed for statement '%.*ls' in procedure '%.*ls'.
- 11552 — The @browse_information_mode parameter expects a tinyint with values 0, 1 or 2.
- 11553 — EXECUTE statement failed because its WITH RESULT SETS clause specified a non-nullable type for column #%d in result set #%d, and the corresponding val…
- 11554 — Cannot assign NULL to non-nullable variable or parameter '%.*ls'.
- 11555 — The parameter '%.*ls' has been declared as NOT NULL. NOT NULL parameters are only supported with natively compiled modules, except for inline table-va…
- 11556 — The stored procedure 'sp_get_database_scoped_credential' is not available in this edition of SQL Server.
- 11557 — The stored procedure 'sp_get_jobs_database_scoped_credential' is not available.
- 11558 — The distributed_move JSON string could not be parsed. Please check the formatting of the JSON.
- 11559 — The distributed_move JSON parameter %.*ls is missing or incorrectly formatted. Please check the formatting of the JSON.
- 11560 — The distributed_move parameter %.*ls value is outside its valid range. Please try again with a valid parameter.
- 11561 — The %.*ls parameter %.*ls value has a length greater than the maximum allowed. Please try again with a valid parameter.
- 11562 — The stored procedure 'sp_showinitialmemo_xml' is not available in this edition of SQL Server.
- 11563 — The stored procedure 'sp_set_session_resource_group' is not available in this edition of SQL Server.
- 11564 — The %.*ls JSON parameter %.*ls is missing or incorrectly formatted. Please check the formatting of the JSON.
- 11565 — The %.*ls JSON string could not be parsed. Please check the formatting of the JSON.
- 11566 — Column %i ('%.*ls') has type '%.*ls', which is not currently supported by native data movement. DMS movement must be used for this query. If this erro…
- 11567 — Column %i ('%.*ls') has type '%.*ls', which is not currently supported for hash distribution by native data movement. DMS movement must be used for th…
- 11568 — The %.*ls JSON parameter %.*ls is missing or incorrectly formatted. Please check the formatting of the JSON.
- 11569 — Column %.*ls has been specified more than once in the partition columns list. Please try again with a valid parameter.
- 11570 — Column %.*ls specified in the partition columns list does not match any columns in SELECT clause. Please try again with a valid parameter.
- 11571 — All output columns in DATA_EXPORT query are declared as PARTITION columns. DATA_EXPORT query requires at least one column to export.
- 11572 — One of the parameters cannot be deduced in this context.
- 11573 — The value of the %.*ls parameter should be in the range %.*ls.
- 11574 — The query references time zone '%ls' in database '%.*ls', which is not a valid time zone in the current operating system.
- 11575 — Cannot generate Substrait query plan due to '%ls'.
- 11576 — sp_show_substrait_query_plan cannot run when the STATISTICS XML, STATISTICS PROFILE, or SHOWPLAN set option is on. Set these options to OFF and re-run…
- 11577 — Only one statement can be used as input parameter to sp_show_substrait_query_plan. Modify the input parameter and re-run the stored procedure.
- 11578 — The stored procedure sp_show_substrait_query_plan is not available in this edition of SQL Server.
- 11579 — Using stored procedures is not supported. Modify the input parameter and re-run sp_show_substrait_query_plan.
- 11580 — sp_showmemo_for_qo_verify cannot deliver its result set when invoked through a nested output connection, such as INSERT ... EXEC. Run sp_showmemo_for_…
- 11601 — %ls statements with a '%.*ls' option are not allowed.
- 11602 — %ls statements are not verified.
- 11603 — %ls statements are not allowed at the top level.
- 11605 — %S_MSG are not allowed at the top level.
- 11606 — Specifying server name in '%.*ls' is not allowed.
- 11607 — Specifying database name for '%.*ls' in a %ls statement is not allowed.
- 11608 — Creating temporary stored procedures is not allowed.
- 11609 — An internal error occurred while building the project. %ls
- 11610 — There is not enough memory to build the project.
- 11611 — Specifying schema elements in the CREATE SCHEMA statement is not supported.
- 11612 — Multiple statements in a T-SQL batch are not allowed at the top level.
- 11613 — Numbered stored procedures are not supported.
- 11614 — %ls is not supported.
- 11617 — An unknown error has occurred trying to load '%hs'.
- 11618 — Combining column level permissions with other permissions is not allowed in the same GRANT/DENY/REVOKE statement.
- 11619 — There is not enough stack available to compile the statment.
- 11620 — REVOKE statements can only be used to revoke column level permissions.
- 11621 — SQL Server started in Language Service mode.
- 11622 — CREATE ASSEMBLY can only be created FROM a constant binary expression.
- 11623 — ALTER TABLE statements can only be used to add a single constraint.
- 11624 — ALTER ROLE statements can only be used to add a member to a role.
- 11625 — '%ls' is either corrupt, not readable or not accessible.
- 11651 — %ls statements with a '%.*ls' option are not supported in a data-tier application.
- 11652 — %ls statements are not supported at the top level in a data-tier application.
- 11653 — Cannot execute as the user '%.*ls' because it does not exist.
- 11700 — The increment for sequence object '%.*ls' cannot be zero.
- 11701 — The absolute value of the increment for sequence object '%.*ls' must be less than or equal to the difference between the minimum and maximum value of …
- 11702 — The sequence object '%.*ls' must be of data type int, bigint, smallint, tinyint, or decimal or numeric with a scale of 0, or any user-defined data typ…
- 11703 — The start value for sequence object '%.*ls' must be between the minimum and maximum value of the sequence object.
- 11704 — The current value '%.*ls' for sequence object '%.*ls' must be between the minimum and maximum value of the sequence object.
- 11705 — The minimum value for sequence object '%.*ls' must be less than its maximum value.
- 11706 — The cache size for sequence object '%.*ls' must be greater than 0.
- 11707 — The cache size for sequence object '%.*ls' has been set to NO CACHE.
- 11708 — An invalid value was specified for argument '%.*ls' for the given data type.
- 11709 — The 'RESTART WITH' argument cannot be used in a CREATE SEQUENCE statement.
- 11710 — Argument 'START WITH' cannot be used in an ALTER SEQUENCE statement.
- 11711 — Argument 'AS' cannot be used in an ALTER SEQUENCE statement.
- 11712 — Argument '%.*ls' can not be specified more than once.
- 11714 — Invalid sequence name '%.*ls'.
- 11715 — No properties specified for ALTER SEQUENCE.
- 11716 — NEXT VALUE FOR function does not support the PARTITION BY clause.
- 11717 — NEXT VALUE FOR function does not support the OVER clause in default constraints, UPDATE statements, or MERGE statements.
- 11718 — NEXT VALUE FOR function does not support an empty OVER clause.
- 11719 — NEXT VALUE FOR function is not allowed in check constraints, default objects, computed columns, views, user-defined functions, user-defined aggregates…
- 11720 — NEXT VALUE FOR function is not allowed in the TOP, OVER, OUTPUT, ON, WHERE, GROUP BY, HAVING, or ORDER BY clauses.
- 11721 — NEXT VALUE FOR function cannot be used directly in a statement that uses a DISTINCT, UNION, UNION ALL, EXCEPT or INTERSECT operator.
- 11722 — NEXT VALUE FOR function is not allowed in the WHEN MATCHED clause, the WHEN NOT MATCHED clause, or the WHEN NOT MATCHED BY SOURCE clause of a merge st…
- 11723 — NEXT VALUE FOR function cannot be used directly in a statement that contains an ORDER BY clause unless the OVER clause is specified.
- 11724 — An expression that contains a NEXT VALUE FOR function cannot be passed as an argument to a table-valued function.
- 11725 — An expression that contains a NEXT VALUE FOR function cannot be passed as an argument to an aggregate.
- 11726 — Object '%.*ls' is not a sequence object.
- 11727 — NEXT VALUE FOR functions for a given sequence object must have exactly the same OVER clause definition.
- 11728 — The sequence object '%.*ls' has reached its minimum or maximum value. Restart the sequence object to allow new values to be generated.
- 11729 — The sequence object '%.*ls' cache size is greater than the number of available values.
- 11730 — Database name cannot be specified for the sequence object in default constraints.
- 11731 — A column that uses a sequence object in the default constraint must be present in the target columns list, if the same sequence object appears in a ro…
- 11732 — The requested range for sequence object '%.*ls' exceeds the maximum or minimum limit. Retry with a smaller range.
- 11733 — Parameter '%.*ls' must be a positive integer.
- 11734 — NEXT VALUE FOR function is not allowed in the SELECT clause when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
- 11735 — The target table of the INSERT statement cannot have DEFAULT constraints using the NEXT VALUE FOR function when the FROM clause contains a nested INSE…
- 11736 — Only one instance of NEXT VALUE FOR function per sequence object is allowed in SET or SELECT with variable assignment.
- 11737 — NEXT VALUE FOR function does not support the ROWS and RANGE clauses.
- 11738 — The use of NEXT VALUE FOR function is not allowed in this context.
- 11739 — NEXT VALUE FOR function cannot be used if ROWCOUNT option has been set, or the query contains TOP or OFFSET.
- 11740 — NEXT VALUE FOR function cannot be used in a default constraint if ROWCOUNT option has been set, or the query contains TOP or OFFSET.
- 11741 — NEXT VALUE FOR function cannot be used within CASE, CHOOSE, COALESCE, IIF, ISNULL and NULLIF.
- 11742 — NEXT VALUE FOR function can only be used with MERGE if it is defined within a default constraint on the target table for insert actions.
- 11743 — Timeout occurred while waiting for METADATA_SEQUENCE_GENERATOR latch: waittime %d seconds.
- 11744 — NEXT VALUE FOR must have ORDER BY.
- 11745 — NEXT VALUE FOR function cannot be used directly in a statement that contains an ORDER BY clause unless the OVER or WINDOW clause is specified.
- 11746 — NEXT VALUE FOR function does not support OVER and WINDOW clause in default constraints, UPDATE statements, or MERGE statements.
- 11747 — Value of parameter '%.*ls' is out of expected range.
- 11748 — NEXT VALUE FOR function is not allowed in the TOP, OVER, OUTPUT, ON, WHERE, GROUP BY, HAVING, ORDER BY, or QUALIFY clauses.
- 11800 — RESTORE WITH SNAPSHOTRESTOREPHASE=2 for database '%ls' failed because an earlier RESTORE WITH SNAPSHOTRESTOREPHASE=1 may have failed as a result of a …
- 11801 — Operation was aborted because RESTORE detected one or more corrupted pages in the backup set. Please resolve the issue by performing another BACKUP, p…
- 11802 — Operation was aborted because an internal error occurred while processing the backup taken without checksum. Please resolve the issue by performing an…
- 11803 — Operation was aborted because RESTORE detected one or more corrupted pages in the backup set. These corruptions would prevent successful automated bac…
- 11804 — Operation was aborted because an internal error occurred while processing the backup taken without checksum. Backups without checksum can contain page…
- 11805 — Operation was aborted because LastBackupName parameter contains forbidden characters ('\n' or '\r').
- 11806 — The operation was aborted because the 'LastBackupName' parameter contains invalid characters. Only ASCII characters are allowed.
- 11901 — Column '%.*ls.%.*ls' is a federated column, while referencing column '%.*ls.%.*ls' in foreign key '%.*ls' is not.
- 11902 — Federation scheme key '%.*ls' is not a part of this federation.
- 11903 — Cannot create table '%.*ls' because non-nullable column '%.*ls' cannot be declared as hidden without either a DEFAULT constraint, the GENERATED ALWAYS…
- 11904 — Cannot create table '%.*ls' because at least one column must be declared as non-hidden.
- 11905 — Resumable index operations can only be performed in Enterprise edition of SQL Server.
- 11906 — The operation cannot be completed because a connection to the SBS file could not be made. Please try to run the operation again. If the error persists…
- 11907 — The operation cannot be completed because a connection to the native shuffle storage could not be made. Please try to run the operation again. If the …
- 12002 — The requested %S_MSG index on column '%.*ls' of table '%.*ls' could not be created because the column type is not %S_MSG . Specify a column name that …
- 12003 — Could not find spatial tessellation scheme '%.*ls' for column of type %.*ls. Specify a valid tessellation scheme name in your USING clause.
- 12004 — Could not find the default spatial tessellation scheme for the column '%.*ls' on table '%.*ls'. Make sure that the column reference is correct, or spe…
- 12005 — Incorrect parameters were passed to the CREATE %S_MSG statement near '%.*ls'. Validate the statement against the index-creation syntax.
- 12006 — Duplicate parameters were passed to the create index statement. Validate the statement against the index-creation syntax.
- 12007 — The CREATE %S_MSG statement is missing the required parameter '%.*ls'. Validate the statement against the index-creation syntax.
- 12008 — Table '%.*ls' does not have a clustered primary key as required by the %S_MSG index. Make sure that the primary key column exists on the table before …
- 12009 — Could not find the %S_MSG index '%.*ls' on table '%.*ls'. Either no %S_MSG index with this name exists, or a non-%S_MSG index might be using the same …
- 12010 — Only one spatial index hint may appear per table, either as the first or the last hinted index.
- 12011 — The value of parameter '%.*ls' of CREATE %S_MSG must be less than %d.
- 12012 — The value of parameter '%.*ls' of CREATE %S_MSG must be greater than %d.
- 12013 — The value of parameter '%.*ls' of CREATE %S_MSG must be greater than the value of parameter '%.*ls'.
- 12014 — The '%.*ls' parameter of CREATE %S_MSG is incompletely defined. If the parameter has more than one part, all the parts must be defined.
- 12015 — The index option %.*ls in the CREATE %S_MSG statement has to appear before the general index options.
- 12016 — Creating a %S_MSG index requires that the primary key in the base table satisfy the following restrictions. The maximum number of primary-key columns …
- 12017 — The spatial index is disabled or offline
- 12018 — The spatial object is not defined in the scope of the predicate
- 12019 — Spatial indexes do not support the comparand supplied in the predicate
- 12020 — Spatial indexes do not support the comparator supplied in the predicate
- 12021 — Spatial indexes do not support the method name supplied in the predicate
- 12022 — The comparand references a column that is defined below the predicate
- 12023 — The comparand in the comparison predicate is not deterministic
- 12024 — The spatial parameter references a column that is defined below the predicate
- 12025 — Could not find required binary spatial method in a condition
- 12026 — Could not find required comparison predicate
- 12100 — ALTER DATABASE failed because FILESTREAM filegroups cannot be added to a database that has either the READ_COMMITTED_SNAPSHOT or the ALLOW_SNAPSHOT_IS…
- 12101 — Cannot disable change tracking on database '%.*ls' while client connections are waiting on change notification. Please close those connections before …
- 12102 — ALTER DATABASE failed because the distribution policy of system databases cannot be changed.
- 12103 — ALTER DATABASE failed because the distribution policy is invalid. The database distribution policy must be set to either NONE or HASH. For the distrib…
- 12104 — ALTER DATABASE CURRENT failed because '%.*ls' is a system database. System databases cannot be altered by using the CURRENT keyword. Use the database …
- 12105 — Waiting for the nonqualified transactions to be rolled back on the remote brick %d.
- 12106 — The path name '%.*ls' is already used by another database file. Change to another valid and UNUSED name.
- 12107 — Adding a MEMORY_OPTIMIZED_DATA filegroup is not supported for databases that have one or more publications that use sync_method 'database snapshot' or…
- 12108 — '%d' is out of range for the database scoped configuration option '%.*ls'. See sp_configure option '%ls' for valid values.
- 12109 — Statement '%.*ls' failed, because it attempted to set the value to '%.*ls' for the primary replica. A settings can only be set to '%.*ls' when the set…
- 12110 — Statement '%.*ls' failed, because it attempted to set the '%.*ls' option for the secondaries replica while this option is only allowed to be set for t…
- 12111 — MODIFY MAXSIZE failed. The DynamicFileAllocationDetectionUnderLock is running by other thread, try again later.
- 12112 — Warning: %ls statement is being forced to run WITH (%S_MSG = ON) because the ELEVATE_%S_MSG database scoped configuration is set to FAIL_UNSUPPORTED. …
- 12113 — %ls statement with multiple clauses failed. The ELEVATE_ONLINE database scoped configuration requires single-clause DROP INDEX, ALTER TABLE ADD CONSTR…
- 12114 — ALTER INDEX REBUILD does not support rebuilding ALL WITH (RESUMABLE=ON) and the ELEVATE_RESUMABLE database scoped configuration is set to FAIL_UNSUPPO…
- 12115 — ADD COLUMN statement failed by the ELEVATE_ONLINE database scoped option. Column could not be added online.
- 12116 — Statement '%.*ls' failed, because it attempted to set the '%.*ls' option in tempdb.
- 12117 — Cannot free the plan because a plan was not found in the database plan cache that corresponds to the specified plan handle. Specify a cached plan hand…
- 12118 — The ADD FILE operation failed because the requested file ID '%d' is invalid.
- 12119 — The ADD FILE operation failed because there is an ongoing ADD FILE operation.
- 12120 — Accelerated Database Recovery cannot be enabled until the Persistent Version Store is cleaned of previous versions. Please use the procedure sys.sp_pe…
- 12121 — Time value %d used with PAUSED_RESUMABLE_INDEX_ABORT_DURATION is not a valid value; PAUSED_RESUMABLE_INDEX_ABORT_DURATION wait time must be greater or…
- 12122 — Accelerated Database Recovery cannot be enabled/disabled on system databases.
- 12123 — [DbId:%d] ADR enabled for the database.
- 12124 — [DbId:%d] ADR disabled for the database.
- 12125 — Accelerated Database Recovery has already been enabled on the database, '%.*ls'. To change the persistent version store filegroup, please disable Acce…
- 12126 — Accelerated Database Recovery cannot be enabled while database mirroring is enabled.
- 12127 — Accelerated Database Recovery cannot be disabled as it is not enabled using DDL.
- 12128 — Accelerated Database Recovery cannot be enabled on Express edition.
- 12129 — The internal tables required for Accelerated Database Recovery feature that stores versions of data rows are not created for the database '%.*ls'. Acc…
- 12130 — Task has been aborted, but %S_MSG of the %S_MSG '%.*ls' may continue in the background. Please check whether the %S_MSG has finished successfully.
- 12131 — ALTER DATABASE SCOPED CONFIGURATION SET DW_COMPATIBILITY_LEVEL statement failed.
- 12132 — Compatibility Level '%d' is not supported. Supported compat levels are: [%s]
- 12133 — Optimized Locking cannot be enabled for the database as Accelerated Database Recovery is not enabled for the database.
- 12134 — Optimized Locking is enabled for this database. Please disable Optimized Locking first and then disable Accelerated Database Recovery.
- 12135 — The Metadata needed for Optimized Locking is not populated yet. Please retry the operation.
- 12136 — The specified digest storage endpoint is invalid. It must be an Azure blob storage endpoint.
- 12137 — Optimized Locking cannot be enabled at this time.
- 12138 — Cannot alter database options for database '%ls' because it is not ONLINE.
- 12139 — Optimized Halloween Protection is enabled for this database. To disable Accelerated Database Recovery, disable the OPTIMIZED_HALLOWEEN_PROTECTION data…
- 12140 — Metadata Snapshot cannot be enabled for this database because Accelerated Database Recovery is not enabled. Enable Accelerated Database Recovery and t…
- 12141 — Metadata Snapshot is enabled for this database. To disable Accelerated Database Recovery, disable Metadata Snapshot and try again.
- 12142 — Automatic Index Compaction cannot be enabled for database '%ls' because Accelerated Database Recovery is not enabled. Enable Accelerated Database Reco…
- 12143 — Automatic Index Compaction is enabled for database '%ls'. To disable Accelerated Database Recovery, disable Automatic Index Compaction and try again.
- 12144 — Automatic Index Compaction cannot be enabled at this time.
- 12145 — Cannot disable the PREVIEW_FEATURES database-scoped configuration while the '%ls' preview feature is active.
- 12146 — Database '%.*ls' cannot be renamed while Mirroring to Microsoft Fabric is enabled. Disable Mirroring and retry rename operation.
- 12147 — Database '%.*ls' cannot be renamed while Change Event Streaming is enabled. Disable Change Event Streaming and retry rename operation.
- 12148 — Database '%.*ls' cannot be renamed while Synapse Link is enabled. Disable Synapse Link and retry rename operation.
- 12149 — Provided time zone ID '%.*ls' is not available in this database.
- 12150 — Adding file '%.*ls' for database '%.*ls' failed to be applied remotely with a failure (code 0x%08x): %ls.
- 12151 — Removing file '%.*ls' from database '%.*ls' failed to be applied remotely with a failure (code 0x%08x): %ls.
- 12152 — Removing a file from database '%.*ls' is disabled in the current stage of failover.
- 12153 — Shrinking a file from database '%.*ls' is disabled in the current stage of failover.
- 12154 — Modifying file header for '%.*ls' of database '%.*ls' failed to be applied remotely with a failure (code 0x%08x): %ls.
- 12155 — Growing a log file of database '%.*ls' is disabled in the current stage of failover.
- 12156 — Database file operation failed due to SDA transition-out at participant for database '%.*ls'.
- 12157 — Database file group operation failed due to SDA transition-out at participant for database '%.*ls', file group '%.*ls'.
- 12158 — Metadata Snapshot cannot be enabled for this database because neither Snapshot Isolation nor Read Committed Snapshot Isolation (RCSI) is enabled. Enab…
- 12159 — Metadata Snapshot is enabled for this database. To disable Read Committed Snapshot Isolation, disable Metadata Snapshot and try again.
- 12160 — Metadata Snapshot is enabled for this database. To disable Snapshot Isolation, disable Metadata Snapshot and try again.
- 12161 — Setting a file max-size of database '%.*ls' is disabled in the current stage of failover.
- 12162 — Setting a file growth increment of database '%.*ls' is disabled in the current stage of failover.
- 12163 — Setting a file logical name of database '%.*ls' is disabled in the current stage of failover.
- 12164 — The value %d is not valid for the database scoped configuration option 'TRANSACTION_PRIORITY_MIN_WAIT_MILLISECONDS'. Specify a value between %d and %d…
- 12165 — Cannot enable change tracking for database '%.*ls' while the database is in failover.
- 12201 — %s
- 12202 — WARN-%s
- 12203 — %s
- 12204 — %s
- 12221 — Internal Query Processor Error: The backend query processor could not produce a query plan. For more information, contact Customer Support Services.
- 12300 — Computed columns are not supported with %S_MSG.
- 12301 — Nullable columns in the index key are not supported with %S_MSG.
- 12302 — Updating columns that are part of the PRIMARY KEY constraint is not supported with %S_MSG.
- 12303 — The 'number' clause is not supported with %S_MSG.
- 12304 — Updating columns that are part of a UNIQUE KEY constraint or a UNIQUE index is not supported with %S_MSG.
- 12305 — Inline table variables are not supported with %S_MSG.
- 12306 — Cursors are not supported with %S_MSG.
- 12307 — Default values for parameters in %S_MSG must be constants.
- 12308 — Table-valued functions are not supported with %S_MSG.
- 12309 — Statements of the form INSERT...VALUES... that insert multiple rows are not supported with %S_MSG.
- 12310 — Common Table Expressions (CTE) are not supported with %S_MSG.
- 12311 — Subqueries (queries nested inside another query) is only supported in SELECT statements with %S_MSG.
- 12312 — Partition functions are not supported with %S_MSG.
- 12313 — User-defined functions are not supported with %S_MSG.
- 12314 — User-defined methods are not supported with %S_MSG.
- 12315 — User-defined properties are not supported with %S_MSG.
- 12316 — User-defined aggregates are not supported with %S_MSG.
- 12317 — Clustered indexes, which are the default for primary keys, are not supported with %S_MSG. Specify a NONCLUSTERED index instead.
- 12318 — Browse mode metadata is not supported with %S_MSG.
- 12319 — Using the FROM clause in an UPDATE statement and specifying a table source in a DELETE statement is not supported with %S_MSG.
- 12320 — Operations that require a change to the schema version, for example renaming, are not supported with %S_MSG.
- 12321 — Creating a temporary procedure is not supported with %S_MSG.
- 12322 — Temporary tables are not supported with %S_MSG.
- 12323 — Distributed Queries and Multiple Active Result Sets (MARS) are not supported with %S_MSG.
- 12324 — Distributed transactions (DTC) are not supported with %S_MSG.
- 12325 — Bound transactions are not supported with %S_MSG.
- 12326 — Creating a savepoint is not supported with %S_MSG.
- 12327 — Comparison, sorting, and manipulation of character strings that do not use a *_BIN2 collation is not supported with %S_MSG.
- 12328 — Indexes on character columns that do not use a *_BIN2 collation are not supported with %S_MSG.
- 12329 — The data types char(n) and varchar(n) using a collation that has a code page other than 1252 are not supported with %S_MSG.
- 12330 — Truncation of character strings with an SC collation is not supported with %S_MSG.
- 12331 — DDL statements ALTER, DROP and CREATE inside user transactions are not supported with %S_MSG.
- 12332 — Database and server triggers on DDL statements CREATE, ALTER and DROP are not supported with %S_MSG.
- 12333 — Execution from the dedicated administrator connection (DAC) is not supported with %S_MSG.
- 12334 — The aggregate functions MIN and MAX used with binary and character string data types is not supported with %S_MSG.
- 12336 — The use of replication is not supported with %S_MSG.
- 12337 — The use of the sp_addpublication sync_method's parameters 'database snapshot' and 'database snapshot character' are not supported with %S_MSG.
- 12338 — The functions LEN and SUBSTRING with an argument in an SC collation are not supported with %S_MSG.
- 12339 — The use of seed and increment values other than 1 is not supported with %S_MSG.
- 12340 — The EXECUTE statement in %S_MSG must use an object name. Variables and quoted identifiers are not supported.
- 12341 — The WITH clause is not supported with EXECUTE statements in %S_MSG.
- 12342 — The EXECUTE statement in %S_MSG only supports executing natively compiled modules.
- 12343 — TRIGGER_NESTLEVEL only supports zero or one argument in %S_MSG.
- 12344 — Only natively compiled modules can be used with %S_MSG.
- 12345 — Max length data types are not supported as the return type of a natively compiled user defined function.
- 12346 — Max length defaults are not supported with %S_MSG.
- 12347 — Max length parameters to user defined functions are not supported in %S_MSG.
- 12348 — Max length literals not supported in %S_MSG.
- 12349 — Operation not supported for memory optimized tables having columnstore index.
- 12350 — DML operations targeting table-valued functions are not supported with %S_MSG.
- 12351 — Only natively compiled functions can be called with the EXECUTE from inside a natively compiled function.
- 12352 — System stored procedures that cause schema changes to %S_MSG are not supported inside user transactions.
- 12353 — Computed columns in indexes on memory optimized tables must be declared as PERSISTED.
- 12354 — The function %ls with an argument in a Japanese_140 collation is currently not supported with %S_MSG.
- 12355 — The persistence of a computed column in a memory optimized table cannot be altered. Drop and re-create the column with the desired persistence.
- 12356 — Comparison, sorting, and manipulation of character strings that use a UTF8 collation is not supported with %S_MSG.
- 12357 — Indexes on character columns that use a UTF8 collation are not supported with %S_MSG.
- 12358 — Enabling CDC creates database triggers on ALTER TABLE and DROP TABLE. Hence, these DDL statements are not supported with %S_MSG on CDC enabled databas…
- 12359 — Ledger tables are not supported with %S_MSG.
- 12401 — The %S_MSG option '%S_MSG' was specified more than once. Each option can be specified only once.
- 12402 — Query with provided query_id (%ld) is not found in the Query Store for database (%ld). Check the query_id value and rerun the command.
- 12403 — Query plan with provided plan_id (%ld) is not found in the Query Store for database (%ld). Check the plan_id value and rerun the command.
- 12404 — The command failed because the query store is not in read-write mode for database (%ld). Make sure that the query store is in read-write mode and reru…
- 12405 — The command failed because the query store is not enabled for database (%ld). Make sure that the query store is enabled for the database and rerun the…
- 12406 — Query plan with provided plan_id (%ld) is not found in the Query Store for query (%ld). Check the plan_id value and rerun the command.
- 12407 — The global instance of the the Query Store Manager is not available.
- 12408 — An operation to read/write to the Query Store failed. Check the error logs to correct the source of the read/write failure
- 12409 — Query Store cannot create system task
- 12410 — Cannot load the Query Store metadata. Try turning the Query Store on manually, or contact customer support to get this addressed.
- 12411 — Cannot load forced plan from the Query Store
- 12412 — Internal table access error: failed to access the Query Store internal table with HRESULT: 0x%x.
- 12413 — Cannot process statement SQL handle. Try querying the sys.query_store_query_text view instead.
- 12414 — Failed to initialize Query Store for use, so user request cannot be executed.
- 12415 — Failed to add query to Query Store for database ID %d.
- 12416 — Parameter sensitive plan parent query was not found in Query Store after load completed for database ID %d.
- 12417 — Only one Query Store option can be given in ALTER DATABASE statement.
- 12418 — Mutually incompatible options for both database state change and for Query Store given in ALTER DATABASE statement.
- 12419 — The command failed because Query Store is disabled on the server or database you are using. Contact customer support to get this addressed.
- 12420 — Cannot perform action because Query Store is not started up for database %.*ls.
- 12421 — User does not have necessary permissions to execute Query Store stored procedure.
- 12422 — Query Store interval length could not be changed because there is at least one existing runtime statistics interval set in the future.
- 12423 — An operation to read/write to the Query Store failed. Partition or delete data, drop indexes, or consult the documentation for possible resolutions.
- 12425 — Query with provided query id (%ld) cannot be deleted since it has active forcing policy.
- 12426 — Plan with provided plan id (%ld) cannot be deleted since it has active forcing policy.
- 12427 — Cannot perform operation on Query Store while it is enabled. Please turn off Query Store for the database and try again.
- 12428 — The Query Store in database %.*ls is missing internal table %.*ls, possibly due to schema or catalog inconsistency.
- 12429 — The Query Store in database %.*ls has an invalid structure for internal table %.*ls, possibly due to schema or catalog inconsistency.
- 12430 — The specified Query Store action is not supported in stored procedure '%.*ls'.
- 12431 — Query Store stored procedure '%.*ls' could not acquire an update lock over the database.
- 12432 — Query Store Interval length cannot be changed because an invalid value was provided. Please try again with a valid value (1, 5, 10, 15, 30 & 60).
- 12433 — Operation failed because Query Store %.*ls is disabled on the server or database you are using. Contact customer support to get this addressed.
- 12434 — The Query Store in database %.*ls is invalid, possibly due to schema or catalog inconsistency.
- 12435 — The Query Store in database %.*ls has an invalid structure for internal table %.*ls column %.*ls, possibly due to schema or catalog inconsistency.
- 12436 — Query Store global Resource Group cannot be determined.
- 12437 — Query Store global Resource Group cannot be determined.
- 12438 — Cannot perform action because Query Store cannot be enabled on system database %.*ls.
- 12439 — Setting database option query_store %ls to %lu for database '%.*ls'.
- 12440 — Setting database option query_store %ls to %ls for database '%.*ls'.
- 12441 — Query store is initializing.This is an informational message only; no user action is required.
- 12442 — Query store flush failed due to internal error.
- 12443 — Query store cannot set default settings.
- 12444 — Query plan with plan_id (%ld) cannot be forced for query with query_id (%ld) as plan forcing is not supported for natively compiled plans.
- 12445 — Cannot set Query Store max_storage_size_mb to %lu. The maximum allowed limit is %lu MB.
- 12446 — Query Store stored procedure is not available on readable secondary replica.
- 12447 — Query plan with plan_id (%ld) cannot be forced for query with query_id (%ld) as plan forcing is not supported for this type of statement.
- 12449 — Query plan cannot be forced for this query as plan forcing is not supported for resumable index builds.
- 12450 — Could not allocate memory for DW query or Showplan of size (%ld).
- 12451 — Setting database option query_store %ls to %I64u for database '%.*ls'.
- 12452 — The value %d is not valid for %S_MSG option %S_MSG. The value must be between %d and %d.
- 12453 — Invalid value provided for %S_MSG option %S_MSG. The value must be between %d %S_MSG and %d %S_MSG.
- 12454 — Setting database option query_store %ls to %lu %S_MSG for database '%.*ls'.
- 12455 — Setting query hint(s) '%.*ls' in Query Store is not supported.
- 12456 — Query with provided query id (%ld) cannot be removed from Query Store since it has query hint(s). Clear the query hints before removing the query.
- 12457 — Query with query_id %d has forced plan. No hints can be applied to it while it has forced plan.
- 12458 — Query with query_id %d has query store hints. Query Store can't force a plan for it while it has hints.
- 12459 — Cannot load Optimization Replay Script (ORS) from the Query Store
- 12460 — The value of (%ld) is not valid for the parameter @disable_optimized_plan_forcing . Please pass either 0 or 1.
- 12461 — Query with query id %d was parameterized automatically by FORCED or SIMPLE parameterization, and has a RECOMPILE hint set in Query Store. RECOMPILE is…
- 12462 — Malformed feedback data for query ID.
- 12463 — Role id should be between (including) 1 and 4
- 12464 — Query plan with plan_id (%ld) cannot be forced for replica group id (%ld)
- 12465 — The query with query id (%ld) cannot be removed from Query Store since it's referenced by one or more query variants. Remove the associated query vari…
- 12466 — The query plan with plan id (%ld) cannot be removed from Query Store since it's referenced by one or more query variants. Remove the associated query …
- 12467 — The feature_id %d is invalid.
- 12468 — Removing feedback for feature_id %d is not supported.
- 12469 — Removing feedback for a specific plan is not supported.
- 12470 — Removing plan feedback is disabled.
- 12471 — The '%.*ls' Query Store system stored procedure is disabled.
- 12472 — A query hint cannot be used for queries with query hash 0x%016I64X because there is a forced plan for that query hash. Remove the forced plan and try …
- 12473 — An internal Query Store memory limit has been reached. Remove any query hash-based hints or unforce any hash-based forced plans, and try again.
- 12474 — Could not parse input showplan XML for query hash 0x%016I64X. Verify that the XML plan is a valid plan suitable for plan forcing, and re-submit the qu…
- 12475 — A plan cannot be forced for query hash 0x%016I64X because there are one or more query hints set for that query hash. Remove the query hints and try ag…
- 12476 — Plan forcing could not be modified for query hash 0x%016I64X. Verify that the XML plan is a valid plan suitable for plan forcing, and re-submit the qu…
- 12477 — Failed to set query hints for query hash 0x%016I64X. Verify that the query hash value is correct and rerun the command.
- 12478 — Could not clear plan forcing specified by query hash. Try again later.
- 12500 — SELECT INTO not allowed in the CTAS statement.
- 12501 — Different number of columns in CREATE TABLE and SELECT query.
- 12502 — Data types cannot be defined using CREATE TABLE AS SELECT syntax.
- 12503 — Specifying schema elements in the CREATE SCHEMA statement is not supported.
- 12504 — Distribution column '%.*ls' must be implictly or explictly specified in the insert select query as the target table '%.*ls' is a hash distributed tabl…
- 12505 — 'Distribution' option must be explicitly specified in a CREATE TABLE AS SELECT query.
- 12506 — The distribution option used is not supported in the CREATE TABLE query.
- 12507 — The index option selected is not supported in a CREATE TABLE AS SELECT query.
- 12508 — Cross-database table clone is not supported.
- 12509 — The user either lacks required permissions on the source or target database, schema, or table, otherwise one or more does not exist.
- 12510 — Feature '%.*ls' is not supported by table clone.
- 12511 — Database Clone is not enabled for this instance.
- 12512 — Internal error. Encounter unexpected error while cloning trident dw database.
- 12513 — An internal error occurred while cloning the specified table.
- 12514 — The specified point-in-time is invalid. The timestamp must not be after the current system time.
- 12515 — The specified point-in-time is invalid. The timestamp must not be before the object was created.
- 12516 — The specified point-in-time is invalid. The timestamp must not be before the object was last altered.
- 12517 — The specified point-in-time is outside of the data retention period for the table. The retention period defined for this table is %d days.
- 12518 — The specified point-in-time is invalid. The point-in-time must be before the current transaction's begin time.
- 12519 — The FOR TIMESTAMP AS OF query hint can only be specified once per statement.
- 12520 — A non-versionable data source was specified in the time travel query.
- 12521 — The FOR TIMESTAMP AS OF query hint can only be used with read-only SELECT statements.
- 12522 — The specified point-in-time is outside of the data retention period for the database. The retention period defined for this database is %d days.
- 12523 — The specified point-in-time is invalid. The timestamp must not be after the current snapshot time.
- 12524 — The specified point-in-time is invalid. Physical metadata is not available at this timestamp. Please specify a later time.
- 12525 — Internal error. Unable to find physical metadata for a table. Please try the operation again and contact Customer Support Services if this persists.
- 12526 — An internal error occurred while cloning the specified warehouse.
- 12527 — %ld days is not a valid value for time travel retention period, valid values: %ld - %ld days.
- 12528 — Configurable time travel retention is not supported for the current edition of the database.
- 12529 — Internal error occurred while updating time travel retention period. Please try the operation again and contact Customer Support Services if this pers…
- 12530 — Time travel retention period update is blocked by snapshot '%ls' (database_id = %d) that would become invalid with new retention period.
- 12531 — Reading time travel retention period failed.
- 12532 — An error occured during a timestamp operation related to time travel or time travel validation.
- 12533 — User does not have permission to alter time travel retention period or the database is not in a state that allows access checks.
- 12600 — DBCC CLONEDATABASE is not allowed on this server.
- 12601 — DBCC CLONEDATABASE is not allowed within a transaction.
- 12602 — DBCC CLONEDATABASE cannot be executed through MARS connection.
- 12603 — DBCC CLONEDATABASE does not support cloning system databases.
- 12604 — Database cannot be read. Check if the database is in offline or suspect mode.
- 12605 — Failed to create snapshot database.
- 12606 — Failed to set snapshot database name.
- 12607 — Specified clone database name '%.*ls' is too long.
- 12608 — Specified clone database name '%.*ls' already exists.
- 12609 — Failed to get file attributes.
- 12610 — Failed to update database registration.
- 12611 — Failed to get database registration attributes.
- 12612 — Failed to sync boot page with database registration.
- 12613 — Too many files or file groups to clone database.
- 12614 — Failed to get collation name.
- 12615 — Failed to get database properties.
- 12616 — Failed to drop partially created cloned database.
- 12617 — File path of the database is not supported.
- 12618 — The database has too many objects.
- 12619 — The database has too long file path to create clone.
- 12620 — Database cloning for '%.*ls' has started with target as '%.*ls'.
- 12621 — Database '%.*ls' is a cloned database. This database should be used for diagnostic purposes only and is not supported for use in a production environm…
- 12622 — Database cloning for '%.*ls' has finished. Cloned database is '%.*ls'.
- 12623 — Clone backup succeeded and is stored in %ls.
- 12624 — Clone backup failed.
- 12625 — RESTORE VERIFY failed on the clone backup %ls
- 12626 — Clone database verification has passed.
- 12627 — Clone database verification has failed.
- 12628 — NO_STATISTICS and NO_QUERYSTORE options turned ON as part of VERIFY_CLONE.
- 12629 — Database '%.*ls' is a cloned database.
- 12630 — VERIFY_CLONE option cannot be specified together with SERVICEBROKER option.
- 12631 — DBCC CLONEDATABASE is not supported for databases that contain ledger tables.
- 12701 — Failed to lock external data source object (EDS name: %.*ls). Lock Mode: %.*ls.
- 12702 — Failed to lock external data source manager. Lock Mode: %.*ls.
- 12703 — Referenced external data source "%ls" not found.
- 12704 — Bad or inaccessible location specified in external data source "%ls".
- 12705 — Referenced external data source "%ls" type is "%ls". Please use BLOB_STORAGE type to reference Azure Blob Storage locations.
- 12706 — File ID %d is already in use on database %d.
- 12707 — Azure File Share Dynamic Scaling failed.
- 12708 — S3 connection options string is not a well formed JSON document. Parsing error %d.
- 12709 — Structure of JSON with S3 connection options is not correct. Cannot get subobject "s3".
- 12710 — S3 URL style option '%ls' is not supported. Please use Path or Virtual_Hosted.
- 12711 — Structure of JSON with S3 connection options is not correct. It has to include at least one parameter.
- 12712 — S3 connection option '%ls' is unexpected, duplicated or not a string.
- 12713 — OPENROWSET is not allowed to read local files. Path: '%ls'.
- 12800 — The reference to temp table name '%.*ls' is ambiguous and cannot be resolved. Use either '%.*ls' or '%.*ls'.
- 12801 — The reference to cursor name '%.*ls' is ambiguous and cannot be resolved. Possible candidates are '%.*ls' and '%.*ls'.
- 12803 — Containment cannot be enabled for database '%.*ls' because it is a system database.
- 12804 — Feature or option "%ls" breaches containment in a contained database. Please see Books Online topic Understanding Contained Databases for more informa…
- 12805 — Index name '%.*ls' is too long. Maximum length for temp table index name is %d characters.
- 12807 — The option '%.*ls' cannot be set on non-contained database.
- 12808 — The option '%.*ls' cannot be set on a database while containment is being set to NONE.
- 12809 — You must remove all users with password before setting the containment property to NONE.
- 12810 — The option '%.*ls' was specified multiple times.
- 12811 — The user options for the instance must be set to 0 in order to %S_MSG a contained database.
- 12813 — Errors were encountered in the %S_MSG '%.*ls' during compilation of the object. Either the containment option of the database '%.*ls' was changed, or …
- 12814 — The object referenced as '%.*ls' resolves differently in the target metadata collation '%.*ls' than in the current metadata collation '%.*ls'.
- 12815 — The column referenced as '%.*ls' resolves differently in the target metadata collation '%.*ls' than in the current metadata collation '%.*ls'.
- 12816 — The type or XML schema collection referenced as '%.*ls' resolves differently in the target metadata collation '%.*ls' than in the current metadata col…
- 12817 — The reference to the variable, parameter or goto label '%.*ls' resolves differently in the target metadata collation '%.*ls' than in the current metad…
- 12818 — RECONFIGURE failed. Attempting to change the 'contained database authentication' value to 0 while there are existing contained databases requires a RE…
- 12819 — sp_migrate_user_to_contained cannot be used in a non-contained database (a database with CONTAINMENT set to NONE).
- 12820 — sp_migrate_user_to_contained can not be used with a user with a password or a user type other than SQL Login.
- 12821 — sp_migrate_user_to_contained cannot be used on a user used in the EXECUTE AS clause of a signed module.
- 12822 — sp_migrate_user_to_contained cannot be used to copy a password to an old hash algorithm.
- 12823 — sp_migrate_user_to_contained can not find the login for user '%.*ls'.
- 12824 — The sp_configure value 'contained database authentication' must be set to 1 in order to %S_MSG a contained database. You may need to use RECONFIGURE t…
- 12825 — The database cannot be contained; this functionality is not available in the current edition of SQL Server.
- 12826 — RECONFIGURE WITH OVERRIDE set the 'contained database authentication' to 0 while there are contained databases in use. This will disrupt authenticatio…
- 12827 — User-named %ls constraint '%.*ls' is not allowed on temp table '%.*ls' because it is being created in a contained database. Please consult the Books O…
- 12828 — User-defined %S_MSG '%.*ls' in tempdb cannot be referenced from local temp table '%.*ls' because the temp table is being created in a contained databa…
- 12829 — The stored procedure '%.*ls' refers to a group of numbered stored procedures. Numbered stored procedures are not available in contained databases. Ple…
- 12830 — The sp_configure 'user options' setting must be zero if the Database Engine has contained databases.
- 12831 — Database '%.*ls' is a contained database. The option 'contained database authentication' setting is 0. Users with passwords will not be able to login …
- 12832 — The database '%.*ls' could not be created or altered to a contained database, because the schema bound %S_MSG '%.*ls' depends on builtin function '%s'…
- 12833 — The database '%.*ls' could not be created or altered to a contained database, because the check constraint '%.*ls' on table '%.*ls' depends on builtin…
- 12834 — The database '%.*ls' could not be created or altered to a contained database, because the computed column '%.*ls' on %S_MSG '%.*ls' depends on builtin…
- 12835 — The definition of the %S_MSG '%.*ls' was refreshed as part of altering the containment option of the database '%.*ls' because the object depends on bu…
- 12836 — ALTER DATABASE statement failed. The containment option of the database '%.*ls' could not be altered because compilation errors were encountered durin…
- 12837 — CREATE DATABASE statement failed. The contained database '%.*ls' could not be created because compilation errors were encountered during validation of…
- 12838 — Replication, Change Data Capture and Change Tracking are not supported in contained databases. The database '%.*ls' cannot be altered to a contained d…
- 12839 — Replication, Change Data Capture and Change Tracking are not supported in contained databases. The option cannot be enabled on the contained database …
- 12840 — CREATE DATABASE failed. Recollating the database failed while creating the partially contained database '%.*ls', with a default data collation of '%.*…
- 12841 — ALTER DATABASE failed. Recollating the database failed while altering the database '%.*ls' to containment='%ls'.
- 12842 — The COLLATE CATALOG_DEFAULT clause cannot be used in a constraint, computed column, index filter expression, or any schema-bound object.
- 12843 — The containment state of database '%.*ls' does not match the value in master. Contained database functionality will not work as expected. Detach and r…
- 12844 — ALTER DATABASE statement failed; this functionality is not available in the current edition of SQL Server.
- 12845 — CREATE DATABASE statement failed; cannot specify both CONTAINMENT = PARTIAL and CATALOG_COLLATION.
- 12846 — Change Feed is not supported in contained databases. The database '%.*ls' cannot be altered to a contained database, since Change Feed has been enable…
- 12847 — Change Event Streaming is not supported in contained databases. The database '%.*ls' cannot be altered to a contained database, since Change Event Str…
- 12980 — Supply either %s or %s to identify the log entries.
- 12981 — You must specify %s when creating a subplan.
- 12982 — Supply either %s or %s to identify the plan or sub-plan to be run.
- 13001 — file name
- 13002 — audit
- 13003 — audit specification
- 13004 — audit name
- 13005 — server role
- 13006 — server principal
- 13008 — receive
- 13010 — read
- 13012 — a USE database statement
- 13013 — a procedure, function or trigger
- 13014 — indexed views and/or indexes on computed columns and/or filtered indexes and/or query notifications and/or XML data type methods and/or spatial index …
- 13015 — spatial index operations
- 13016 — an INTO clause
- 13018 — a COMPUTE clause
- 13019 — a SELECT INTO statement
- 13020 — option
- 13021 — offset option
- 13022 — statistics option
- 13024 — function name
- 13025 — varbinary (128) NOT NULL
- 13026 — parameter
- 13027 — convert specification
- 13028 — index
- 13029 — table
- 13030 — database
- 13031 — procedure
- 13032 — trigger
- 13033 — view
- 13034 — default
- 13035 — rule
- 13036 — system table
- 13037 — unknown type
- 13038 — SET option
- 13039 — column
- 13040 — type
- 13041 — character string
- 13042 — integer
- 13043 — identifier
- 13044 — number
- 13045 — indexes
- 13047 — object
- 13049 — built-in function name
- 13050 — aggregate function
- 13051 — XML INDEX
- 13052 — CLR type
- 13053 — xml schema collection
- 13054 — EXTENDED INDEX
- 13055 — SPATIAL INDEX
- 13056 — spatial
- 13057 — a planguide batch
- 13058 — geometry or geography
- 13059 — conversation priority
- 13060 — tablegroup
- 13076 — an assignment
- 13077 — a cursor declaration
- 13078 — replication filter
- 13079 — variable assignment
- 13080 — statistics
- 13081 — file
- 13082 — filegroup
- 13083 — server
- 13084 — write
- 13085 — function
- 13086 — database collation
- 13087 — drop
- 13088 — alter
- 13089 — message type
- 13090 — contract
- 13092 — service
- 13093 — queue
- 13094 — table valued function
- 13095 — event notification
- 13096 — synonym
- 13097 — lock
- 13098 — thread
- 13099 — communication buffer
- 13100 — Common Language Runtime critical section
- 13101 — partition scheme
- 13102 — DETACH
- 13103 — protocol version
- 13104 — RANGE
- 13105 — create
- 13106 — route
- 13107 — remote service binding
- 13108 — Initiator
- 13109 — Target
- 13110 — host synchronization object
- 13111 — generic waitable object
- 13112 — application role
- 13113 — schema
- 13114 — user
- 13115 — login
- 13116 — certificate
- 13117 — role
- 13118 — find
- 13119 — endpoint
- 13120 — sql:variable
- 13121 — sql:column
- 13122 — XML namespace
- 13123 — assembly
- 13124 — fulltext catalog
- 13125 — execute as
- 13126 — symmetric key
- 13127 — principal
- 13128 — security descriptor
- 13129 — hypothetical index
- 13130 — nonclustered index
- 13131 — credential
- 13132 — transfer
- 13133 — Cumulative wait time (ms) per second
- 13134 — Waits started per second
- 13135 — Waits in progress
- 13136 — Average wait time (ms)
- 13137 — Cumulative execution time (ms) per second
- 13138 — Execs started per second
- 13139 — Execs in progress
- 13140 — Average execution time (ms)
- 13141 — asymmetric key
- 13142 — an INSERT SELECT statement
- 13143 — partition function
- 13144 — partition scheme
- 13145 — encryption
- 13146 — signature
- 13147 — password
- 13148 — rename
- 13149 — end dialog
- 13150 — END CONVERSATION WITH ERROR
- 13151 — MOVE CONVERSATION
- 13152 — receive sequenced message
- 13153 — receive end conversation
- 13154 — receive end conversation with error
- 13155 — receive broker error
- 13156 — receive message acknowledgement
- 13157 — terminate conversation
- 13158 — broker error
- 13159 — countersignature
- 13160 — BEGIN CONVERSATION TIMER
- 13161 — fire conversation timer
- 13162 — END CONVERSATION WITH CLEANUP
- 13163 — BEGIN DIALOG CONVERSATION
- 13164 — SEND
- 13165 — conversation
- 13166 — conversation group
- 13167 — system
- 13168 — Service Broker
- 13169 — Database Mirroring
- 13170 — table or indexed view
- 13171 — conversation handle
- 13172 — GET CONVERSATION GROUP
- 13173 — master key
- 13174 — another assembly with same SQL name is already present in the current database
- 13175 — version, culture or public key mismatch
- 13176 — component
- 13177 — IL compilation
- 13178 — Inproc data access
- 13179 — DDL operations
- 13180 — execution cache cleanup
- 13181 — unspecified operation
- 13182 — dialog
- 13183 — The certificate's private key cannot be found
- 13184 — The certificate's private key size is incompatible with the crypto provider
- 13185 — The certificate's public key size is incompatible with the crypto provider
- 13186 — The certificate's private key size is incompatible with the encrypted key exchange key
- 13187 — The certificate's public key size is incompatible with the security header's signature
- 13188 — The certificate's private key is password protected
- 13189 — The key exchange key has an invalid size after being decrypted with the certificate private key
- 13190 — The database principal used to lookup the cert is invalid
- 13191 — The database principal has no mapping to a server principal
- 13192 — The certificate is disabled for BEGIN DIALOG
- 13193 — encryption algorithm
- 13194 — authentication protocol
- 13195 — Certificate not found
- 13196 — Certificate not yet valid
- 13197 — Certificate expired
- 13198 — Certificate is larger than maximum allowed size
- 13199 — message timestamp
- 13201 — security header timestamp
- 13202 — TO BROKER INSTANCE
- 13203 — TO SERVICE
- 13204 — FROM BROKER INSTANCE
- 13205 — FROM SERVICE
- 13206 — SERVICE CONTRACT
- 13207 — MESSAGE TYPE
- 13208 — MESSAGE INTEGRITY CHECK
- 13209 — KEY SALT
- 13210 — SESSION KEY
- 13211 — KEY EXCHANGE KEY
- 13212 — SOURCE CERTIFICATE ISSUER NAME
- 13213 — SOURCE CERTIFICATE SERIAL NUMBER
- 13214 — DESTINATION CERTIFICATE ISSUER NAME
- 13215 — DESTINATION CERTIFICATE SERIAL NUMBER
- 13216 — SECURITY HEADER SIGNATURE
- 13217 — MESSAGE BODY
- 13218 — STATEMENT
- 13219 — clustered index
- 13220 — primary xml index
- 13221 — manual failover
- 13222 — automatic failover
- 13223 — failover from partner
- 13224 — role synchronization
- 13225 — FORCE_SERVICE_ALLOW_DATA_LOSS
- 13226 — add
- 13227 — to
- 13228 — from
- 13229 — enable
- 13230 — disable
- 13231 — remap
- 13232 — INSERT
- 13233 — UPDATE
- 13234 — DELETE
- 13235 — WHEN MATCHED
- 13236 — WHEN NOT MATCHED
- 13237 — WHEN NOT MATCHED BY SOURCE
- 13238 — TOP or OFFSET
- 13239 — GROUP BY
- 13240 — HAVING
- 13241 — ORDER BY
- 13242 — COMPUTE
- 13243 — OUTPUT INTO
- 13244 — SELECT
- 13245 — WHERE
- 13246 — unexpected
- 13247 — The crypto API has detected bad data while trying to perform a decryption operation
- 13248 — OUTPUT
- 13249 — Temporary tables
- 13250 — Labels
- 13251 — availability group
- 13252 — type table
- 13254 — event
- 13255 — target
- 13256 — event action
- 13257 — event session
- 13258 — event package
- 13259 — event object
- 13260 — event predicate comparator
- 13261 — event attribute or predicate source
- 13262 — customizable attribute
- 13263 — event predicate
- 13264 — predicate source
- 13265 — event attribute
- 13266 — partitioned
- 13267 — not partitioned
- 13268 — resource pool
- 13269 — workload group
- 13270 — resource governor
- 13271 — move
- 13272 — UPDATETEXT
- 13273 — WRITETEXT
- 13274 — torn page (expected signature: 0x%08x; actual signature: 0x%08x)
- 13275 — incorrect checksum (expected: 0x%08x; actual: 0x%08x)
- 13276 — invalid protection option
- 13277 — invalid encryption key
- 13278 — unable to decrypt page
- 13279 — decryption failure (expected: 0x%08x; actual: 0x%08x)
- 13280 — unable to decrypt page due to missing DEK
- 13281 — CREATION_DISPOSITION
- 13282 — PROVIDER_KEY_NAME
- 13283 — key source
- 13284 — ENCRYPTION BY
- 13285 — public key
- 13286 — private key
- 13287 — cryptographic provider
- 13288 — cryptographic provider DLL path
- 13289 — cryptographic provider friendly name
- 13290 — version
- 13291 — guid
- 13292 — create credential for
- 13293 — cryptographic provider key name
- 13294 — key persistence
- 13295 — cryptographic provider key thumbprint length
- 13296 — cryptographic provider key blob length
- 13297 — encryption algorithm tag
- 13298 — name
- 13299 — thumbprint
- 13301 — IV(Initialization Vector) length
- 13302 — bit length
- 13303 — constraint
- 13304 — database encryption key
- 13305 — QUERY_STORE
- 13306 — DESIRED_STATE' or 'OPERATION_MODE
- 13307 — MAX_STORAGE_SIZE_MB
- 13308 — FLUSH_INTERVAL_SECONDS' or 'DATA_FLUSH_INTERVAL_SECONDS
- 13309 — QUERY_STORE CLEANUP_POLICY
- 13310 — STALE_QUERY_THRESHOLD_DAYS
- 13311 — column master key
- 13312 — column encryption key
- 13313 — key store provider name
- 13314 — FILESTREAM
- 13315 — ROWGUID
- 13316 — FOR XML
- 13317 — FOR JSON
- 13318 — encrypted value
- 13319 — key path
- 13320 — BLOCK
- 13321 — FILTER
- 13322 — INTERVAL_LENGTH_MINUTES
- 13323 — MAX_PLANS_PER_QUERY
- 13324 — QUERY_CAPTURE_MODE
- 13325 — SIZE_BASED_CLEANUP_MODE
- 13326 — external resource pool
- 13327 — external library
- 13328 — QUERY_TUNING_MODE
- 13329 — QDS server name
- 13330 — WAIT_STATS_CAPTURE_MODE
- 13331 — external language
- 13332 — maximum
- 13333 — total
- 13334 — Certificate chain validation failed
- 13335 — Certificate does not have subject alternative name
- 13336 — There is no trusted issuer found for this certificate
- 13337 — PER_REPLICA_MODE
- 13371 — STATISTICS_INCREMENTAL
- 13372 — this operation cannot be performed inside a user transaction.
- 13373 — Anchor record
- 13374 — Page dictionary
- 13375 — Compression information structure
- 13376 — Fulltext Query String
- 13377 — Fulltext Query Language
- 13378 — Fulltext Query Max Keys
- 13379 — fulltext stoplist
- 13380 — Success - Consult EKM Provider for details
- 13381 — Failure - Consult EKM Provider for details
- 13382 — Insufficient Buffer - Consult EKM Provider for details
- 13383 — Not Supported - Consult EKM Provider for details
- 13384 — Object Not Found - Consult EKM Provider for details
- 13385 — Authentication Failure - Consult EKM Provider for details
- 13386 — Invalid Argument - Consult EKM Provider for details
- 13387 — Provider Error - No explanation is available, consult EKM Provider for details
- 13388 — Key Flags
- 13389 — Key Name
- 13390 — Key Type
- 13391 — Location:
- 13392 — Location relative to the specified target node:
- 13393 — search property list
- 13394 — MERGE
- 13395 — PAD_INDEX
- 13396 — FILLFACTOR
- 13397 — SORT_IN_TEMPDB
- 13398 — IGNORE_DUP_KEY
- 13399 — STATISTICS_NORECOMPUTE
- 13400 — Extended stored procedure API will be removed in a future version of SQL Server. Avoid using this feature in new development work, and plan to modify …
- 13401 — Non-ANSI '*=' and '=*' outer join operators will be removed in the next version of SQL Server. Avoid using this feature in new development work, and p…
- 13402 — The ability to INSERT NULL values into TIMESTAMP columns will be removed in a future version of SQL Server. Avoid using this feature in new developmen…
- 13403 — The ability to use string literals as column aliases will be removed in a future version of SQL Server. Avoid using this feature in new development wo…
- 13404 — The ability to use '#' and '##' as the name of temporary tables and stored procedures will be removed in a future version of SQL Server. Avoid using t…
- 13405 — The ability to use '@' and names that start with '@@' as Transact-SQL identifiers will be removed in a future version of SQL Server. Avoid using this …
- 13406 — The ability to use the DEFAULT keyword as a default value will be removed in a future version of SQL Server. Avoid using this feature in new developme…
- 13407 — FASTFIRSTROW hint will be removed in the next version of SQL Server. Avoid using this feature in new development work, and plan to modify applications…
- 13408 — %ls will be removed in the next version of SQL Server. Avoid using this feature in new development work, and plan to modify applications that currentl…
- 13409 — Collation '%ls' will be removed in a future version of SQL Server. Avoid using this collation in new development work, and plan to modify applications…
- 13410 — Creating credentials using mismatched password for sp_control_dbmasterkey_password will be removed in a future version of SQL Server. Avoid using this…
- 13501 — Temporal generated always column '%.*ls' has invalid data type.