错误码目录 / Oracle Database
Oracle Database 错误码目录 · 第 1 / 22 页
本页收录 Oracle Database 的 21,918 条错误码知识条目,每条均可打开独立详情页,包含错误说明、编号信息、官方文档与公开资料。
- ORA-00000 — normal, successful completion 原因:Normal exit. 处理:None
- ORA-00001 — unique constraint ( string . string ) violated 原因:An UPDATE or INSERT statement attempted to insert a duplicate key. For Trusted Oracle configured in …
- PLS-00001 — string
- TNS-00001 — INTCTL: error while getting command line from the terminal 原因:Improper standard input connection from the terminal. 处理:Normally not visible to the use…
- TNS-00002 — INTCTL: error while starting the Interchange 原因:The Interchange could not be started. 处理:Check the Interchange configuration files (INTCHG.ORA, TNSNET…
- TNS-00003 — INTCTL: error while sending request to the Interchange 原因:Improper command sent to the Interchange or the Interchange is not responding. Not normally …
- TNS-00004 — INTCTL: error while starting the Navigator 原因:The Navigator could not be started. 处理:Check to make sure that executables for the Navigator (navgatr) a…
- TNS-00005 — INTCTL: error while sending request to the Navigator 原因:The Navigator is not responding. Either the Navigator is not running or another process is res…
- TNS-00006 — INTCTL: HOST variable is not defined 原因:The HOST variable was not set. 处理:Set the variable HOST properly and restart the INTCTL program.
- TNS-00007 — INTCTL: unknown host 原因:The pointer HOST is set to an unknown hostname. 处理:Set the pointer HOST properly and restart INTCTL program.
- TNS-00008 — INTCTL: could not contact destination Navigator 原因:Connection could not be properly established to a Navigator. This may be because the Navigator spec…
- TNS-00009 — INTCTL: could not contact destination Connection Manager 原因:Connection could not be properly established to a Connection Manager. This may be because …
- TNS-00010 — Error while flushing NS context 原因:Internal NS error; connection may be lost. 处理:Make sure the connection is properly established. If the error persis…
- TNS-00011 — INTCTL: error while starting the Connection Manager 原因:The Connection Manager could not be started. 处理:Assure that the executable can be found in the …
- TNS-00012 — INTCTL: error while processing Connection Manager request 原因:An improper command was sent to the Connection Manager or it is not responding. Not norma…
- TNS-00013 — INTCTL: error while performing NS disconnect command 原因:Internal NS error. Error in closing down connections. 处理:Make sure the networking protocol bei…
- TNS-00014 — INTCTL: error while opening terminal input channel 原因:Could not open standard terminal input. Internal error. 处理:Normally not visible to the user. Res…
- TNS-00015 — INTCTL: error while closing terminal input channel 原因:Could not close terminal input channel. Internal error. 处理:Normally not visible to the user. Res…
- TNS-00016 — INTCTL: error while performing NS send command 原因:Internal NS error. Connection may be lost. 处理:If the error persists contact Oracle Customer Support.
- ORA-00017 — session requested to set trace event 原因:The current session was requested to set a trace event by another session. 处理:This is used internally; no acti…
- TNS-00017 — INTCTL: error while performing NS receive command 原因:Internal NS error. Connection may be lost. 处理:If the error persists contact Oracle Customer Suppo…
- ORA-00018 — maximum number of sessions exceeded 原因:All session state objects are in use. 处理:Increase the value of the SESSIONS initialization parameter.
- TNS-00018 — INTCTL: TNS_ADMIN not defined 原因:The TNS_ADMIN pointer is improperly set. 处理:No action necessary; TNS_ADMIN need only be set if you want to use a diff…
- ORA-00019 — maximum number of session licenses exceeded 原因:All licenses are in use. 处理:Increase the value of the LICENSE MAX SESSIONS initialization parameter.
- TNS-00019 — INTCTL: error initializing the national language interface 原因:The message file could not be found. 处理:Make sure that the ORACLE environment is set and…
- ORA-00020 — maximum number of processes ( string ) exceeded 原因:All process state objects are in use. 处理:Increase the value of the PROCESSES initialization paramet…
- TNS-00020 — INTCTL: missing NAVIGATOR_DATA in TNSNAV.ORA 原因:TNSNAV.ORA does not contain the NAVIGATOR_DATA component. 处理:Define the ADDRESS(es) for the Navigator,…
- ORA-00021 — session attached to some other process; cannot switch session 原因:The user session is currently used by others. 处理:Do not switch to a session attached …
- TNS-00021 — INTCTL: missing INTERCHANGE_DATA in INTCHG.ORA 原因:INTCHG.ORA does not contain an INTERCHANGE_DATA component. 处理:Define the correct data for the Connec…
- ORA-00022 — invalid session ID; access denied 原因:Either the session specified does not exist or the caller does not have the privilege to access it. 处理:Specify a …
- PLS-00022 — out of memory
- TNS-00022 — INTCTL: missing CMANAGER_NAME in INTCHG.ORA 原因:INTCHG.ORA does not contain a CMANAGER_NAME component. 处理:Define the correct name for the CMANAGER_NAME…
- ORA-00023 — session references process private memory; cannot detach session 原因:An attempt was made to detach the current session when it contains references to p…
- TNS-00023 — INTCTL: missing ADDRESS(es) in config files 原因:Configuration files do not contain an ADDRESS/ADDRESS_LIST component. 处理:Define the Connection Manager …
- ORA-00024 — logins from more than one process not allowed in single-process mode 原因:Trying to login more than once from different processes for ORACLE started in …
- TNS-00024 — INTCTL: Unable to contact Navigator to obtain Connection Manager address 原因:The Navigator is not running. 处理:Verify that the Navigator is running by d…
- ORA-00025 — failed to allocate string 原因:Out of memory. 处理:Restart with larger sga heap.
- TNS-00025 — INTCTL: The ORACLE environment is not set up correctly 原因:The ORACLE environment is incorrectly set up. 处理:Refer to the Oracle operating system specif…
- ORA-00026 — missing or invalid session ID 原因:Missing or invalid session ID string for the current operation. 处理:Retry with a valid session ID.
- TNS-00026 — INTCTL: TNS_ADMIN directory set, and is being used 原因:The TNS_ADMIN environment variable is set properly. INTCTL will use the TNS_ADMIN directory. Thi…
- ORA-00027 — cannot kill current session 原因:Attempted to use ALTER SYSTEM KILL SESSION to kill the current session. 处理:None
- PLS-00027 — redeclared SQL Identifier ' string ' at line number in file string
- TNS-00027 — INTCTL: Could not resolve Navigator's name/address 原因:The Navigator's name to address definition is missing. 处理:Check TNSNAMES.ORA file and make sure …
- ORA-00028 — your session has been killed 原因:A privileged user has killed your session and you are no longer logged on to the database. 处理:Login again if you wish …
- PLS-00028 — option ' string ' not legal as EXEC ORACLE OPTION
- TNS-00028 — INTCTL: Could not resolve Connection Manager's name/address 原因:The Connection Manager's name does not have a definition that the Navigator knows about…
- ORA-00029 — session is not a user session 原因:The session ID specified in the current operation was not a user session (for example, recursive, etc.). 处理:Retry wit…
- PLS-00029 — ambiguous option ' string '
- ORA-00030 — User session ID does not exist. 原因:The user session ID no longer exists, probably because the session was logged out. 处理:Use a valid session ID.
- PLS-00030 — invalid label range specified
- ORA-00031 — session marked for kill 原因:The session specified in an ALTER SYSTEM KILL SESSION command cannot be killed immediately (because it is rolling back or b…
- PLS-00031 — invalid operand ' string ' for option ' string '
- TNS-00031 — INTCTL: internal NT error 原因:Problem interfacing to the protocol adapters installed. 处理:Normally not visible to the user. Try starting INTCTL again. I…
- ORA-00032 — invalid session migration password 原因:The session migration password specified in a session creation call was invalid (probably too long). 处理:Retry wi…
- PLS-00032 — invalid option ' string '
- TNS-00032 — INTCTL: internal NS error 原因:Problem interfacing with TNS. 处理:Normally not visible to the user. Try starting INTCTL again. If the error persists, chec…
- ORA-00033 — current session has empty migration password 原因:An attempt was made to detach or clone the current session and it has an empty migration password. Thi…
- PLS-00033 — missing operand for option ' string '
- TNS-00033 — INTCTL: internal NL error 原因:Problem with internal TNS module NL. 处理:Normally not visible to the user. Try starting INTCTL again. If the error persist…
- ORA-00034 — cannot string in current PL/SQL session 原因:An attempt was made to issue a commit or rollback from a PL/SQL object (procedure, function, package) in a …
- TNS-00034 — INTCTL: internal NR error 原因:Problem with internal Interchange routines. 处理:Normally not visible to the user. Try starting INTCTL again. If the error …
- ORA-00035 — LICENSE_MAX_USERS cannot be less than current number of users 原因:Specified values for LICENSE_MAX_USERS was less than the current number of users. 处理:…
- PLS-00035 — no host language specified
- TNS-00035 — INTCTL: error while constructing full file name 原因:Problem while constructing the full path for a file name because the path name to the file or the e…
- ORA-00036 — maximum number of recursive SQL levels ( string ) exceeded 原因:An attempt was made to go more than the specified number of recursive SQL levels. 处理:Rem…
- PLS-00036 — no input file name specified
- TNS-00036 — INTCTL: error reading from Navigator or Connection Manager error files 原因:Problem while reading from Navigator or Connection Manager error files gener…
- ORA-00037 — cannot switch to a session belonging to a different server group 原因:An attempt was made to switch to a session in a different server group. This is no…
- PLS-00037 — ?? unable to log on to ORACLE with ' string '
- TNS-00037 — INTCTL: error opening Navigator or Connection Manager error files 原因:Failed to open Navigator or Connection Manager error files when they have failed …
- ORA-00038 — Cannot create session: server group belongs to another user 原因:An attempt was made to create a non-migratable session in a server group that is owned …
- PLS-00038 — ?? unable to open a cursor
- TNS-00038 — INTCTL: Poorly formed address or command string 原因:An unacceptable string was encountered while attempting to send a message to either the Navigator o…
- ORA-00039 — error during periodic action 原因:An unexpected error occurred while executing a periodically invoked action. 处理:Check the error stack for detailed erro…
- PLS-00039 — unable to open input file ' string '
- TNS-00039 — INTCTL: error while spawning a process 原因:An error was encountered while spawning a process due to an internal operating system dependent problem. Mac…
- ORA-00040 — active time limit exceeded - call aborted 原因:The Resource Manager SWITCH_TIME limit was exceeded. 处理:Reduce the complexity of the update or query, or …
- PLS-00040 — unable to open listing file ' string '
- TNS-00040 — INTCTL: failed to initialize trace context- Continuing anyway 原因:Problem while opening specified trace file because of errors in INTCHG.ORA or because…
- ORA-00041 — active time limit exceeded - session terminated 原因:The Resource Manager SWITCH_TIME limit was exceeded. 处理:Reduce the complexity of the update or quer…
- PLS-00041 — unable to open output file ' string '
- TNS-00041 — INTCTL: Navigator already running. Start operation cancelled 原因:There is a Navigator already running and listening on the same addresses. 处理:None; the…
- ORA-00042 — Unknown Service name string 原因:An attempt was made to use an invalid application service. 处理:Use a valid service name from SERVICE$ or add a new servi…
- PLS-00042 — unable to close output file ' string '
- TNS-00042 — INTCTL: CMANAGER already running. Start operation cancelled 原因:There is a Connection Manager already running and listening on the same addresses. 处理:N…
- ORA-00043 — remote operation failed 原因:Execution of the inter-instance operation failed. 处理:Check the status of the target instance. The operation may have partia…
- TNS-00043 — The CMANAGER has active connections, do you still want to stop it (y/n)? 原因:The CMANAGER that is being stopped has active connections going through. T…
- ORA-00044 — timed_statistics must be TRUE when statistics_level is not BASIC 原因:The user attempted to set timed_statistics to FALSE when statistics_level was not …
- TNS-00044 — INTCTL: You must have an INTCHG.ORA file to contact the Connection Manager 原因:There was an attempt to contact a default Connection Manager (Interchang…
- ORA-00045 — Your session has been terminated with no replay. 原因:A privileged user terminated your session and you were no longer logged on to the database. Your s…
- TNS-00045 — INTCTL: Could not contact the Navigator on address 原因:There was an attempt to contact a Navigator on a specific address which is not responding. 处理:Ch…
- ORA-00046 — cannot modify sessions parameter 原因:An attempt was made to alter the sessions parameter in the root container or non-consolidated database. 处理:The ses…
- TNS-00046 — INTCTL: Could not contact the CMANAGER on address 原因:There was an attempt to contact a CMANAGER on a specific address which is not responding. 处理:Veri…
- ORA-00047 — cannot set sessions parameter to this value 原因:An attempt was made to alter the sessions parameter to a value greater than the root container's sessio…
- ORA-00049 — maximum number of DB_FILES exceeded for the PDB 原因:The value of the DB_FILES initialization parameter was exceeded for the pluggable database (PDB). 处…
- PLS-00049 — bad bind variable ' string ' 原因:The client (caller) of PL/SQL has parsed a bind variable that it has informed to be 'bad'. 处理:n/a
- ORA-00050 — operating system error occurred while obtaining an enqueue 原因:Could not obtain the operating system resources necessary to cover an oracle enqueue. Th…
- ORA-00051 — timeout occurred while waiting for a resource 原因:Usually due to a dead instance. 处理:Check for any dead, unrecovered instances and recover them.
- ORA-00052 — maximum number of enqueue resources ( string ) exceeded 原因:Ran out of enqueue resources. 处理:Increase the value of the ENQUEUE_RESOURCES initialization…
- ORA-00053 — maximum number of enqueues exceeded 原因:Ran out of enqueue state objects. 处理:Increase the value of the ENQUEUES initialization parameter.
- ORA-00054 — resource busy and acquire with NOWAIT specified or timeout expired 原因:Interested resource is busy. 处理:Retry if necessary or increase timeout.
- ORA-00055 — maximum number of DML locks exceeded 原因:Ran out of DML lock state objects. 处理:Increase the value of the DML_LOCKS initialization parameter and warm st…
- ORA-00056 — DDL lock on object ' string . string ' is already held in an incompatible mode 原因:An attempt was made to acquire a DDL lock that is already locked. 处理…
- ORA-00057 — maximum number of temporary table locks exceeded 原因:The number of temporary tables equals or exceeds the number of temporary table locks. Temporary ta…
- ORA-00058 — DB_BLOCK_SIZE must be string to mount this database (not string ) 原因:DB_BLOCK_SIZE initialization parameter is wrong for the database being mounted. I…
- ORA-00059 — maximum number of DB_FILES exceeded 原因:The value of the DB_FILES initialization parameter was exceeded. 处理:Increase the value of the DB_FILES paramete…
- ORA-00060 — deadlock detected while waiting for resource 原因:Transactions deadlocked one another while waiting for resources. 处理:Look at the trace file to see the …
- TNS-00060 — INTCTL: Bad command: only the STATUS command can be used on remote Interchanges 原因:The user entered a command that does not exist, or the user tried t…
- ORA-00061 — another instance has a different DML_LOCKS setting 原因:The shared instance being started is using DML locks, and the running instances are not, or vice…
- TNS-00061 — INTCTL: Bad command or syntax error: You must specify a trace level 原因:The user did not specify a trace level. 处理:Specify a trace level and retry comm…
- ORA-00062 — DML full-table lock cannot be acquired; DML_LOCKS is 0 原因:The instance was started with DML_LOCKS = 0, and the statement being executed needs a full-t…
- TNS-00062 — INTCTL: Bad command or syntax error: For help type help/h/? 原因:The user entered an invalid command. 处理:Check the MultiProtocol Interchange Administrat…
- ORA-00063 — maximum number of log files exceeded string 原因:The number of log files specificied exceeded the maximum number of log files supported in this release.…
- TNS-00063 — INTCTL: Failed to allocate memory for buffers 原因:INTCTL was unable to allocate memory for internal buffers. 处理:Check the amount of available memory on…
- ORA-00064 — object is too large to allocate on this O/S ( string , string , string ) 原因:An initialization parameter was set to a value that required allocating mo…
- TNS-00064 — INTCTL: Failed to find CMANAGER_NAME in INTCHG.ORA 原因:INTCTL was unable to find the CMANAGER_NAME parameter in INTCHG.ORA. 处理:Check that the INTCHG.OR…
- ORA-00065 — initialization of FIXED_DATE failed 原因:The FIXED_DATE string was not in date format yyyy-mm-dd:hh24:mi:ss. 处理:Make sure the initialization parameter i…
- TNS-00065 — INTCTL: Command cannot be executed remotely 原因:A command other than status and version has been attempted remotely. 处理:If you desire execute any comma…
- ORA-00066 — SID ' string ' contains an illegal character or is too long 原因:The specified SID contained an illegal character or the SID specified was too long, whi…
- ORA-00067 — invalid value string for parameter string ; must be at least string 原因:The value for the initialization parameter is invalid. 处理:Choose a value as ind…
- ORA-00068 — invalid value string for parameter string , must be between string and string 原因:The value for the initialization parameter is invalid. 处理:Choose a va…
- ORA-00069 — cannot acquire lock -- table locks disabled for string 原因:A command was issued that tried to lock the table indicated in the message. Examples of comm…
- ORA-00070 — command string is not valid 原因:An invalid debugger command was specified. 处理:Type HELP to see the list of available commands.
- TNS-00070 — INTCTL usage: [intctl] command <process_name> [argument]\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00071 — process number must be between 1 and string 原因:An invalid process number was specified. 处理:Specify a valid process number.
- TNS-00071 — where command is one of following: \n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00072 — process " string " is not active 原因:An invalid process was specified. 处理:Specify a valid process.
- TNS-00072 — * start - start up process_name\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00073 — command string takes between string and string argument(s) 原因:An incorrect number of arguments was specified. 处理:Specify the correct number of argumen…
- TNS-00073 — * stop/abort - stop the process_name\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00074 — no process has been specified 原因:No debug process has been specified. 处理:Specify a valid process.
- TNS-00074 — * status - get statistics from the process_name\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00075 — process " string " not found in this instance 原因:The specified process was not logged on to the current instance. 处理:Specify a valid process.
- TNS-00075 — NOTE: the user may get the status info of a remote\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00076 — dump string not found 原因:An attempt was made to invoke a dump that does not exist. 处理:Type DUMPLIST to see the list of available dumps.
- TNS-00076 — component by specifying the component name in\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00077 — dump string is not valid 原因:An attempt was made to invoke an invalid dump. 处理:Try another dump.
- TNS-00077 — the argument field\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00078 — cannot dump variables by name 原因:An attempt was made to dump a variable by name on a system that does not support this feature. 处理:Try the PEEK comman…
- TNS-00078 — * log_on - ask process_name to turn logging on\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00079 — variable string not found 原因:An attempt was made to dump a variable that does not exist. 处理:Use a valid variable name.
- TNS-00079 — * log_off - ask process_name to turn logging off\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00080 — invalid global area specified by level string 原因:An attempt was made to dump an invalid global area. 处理:Use level 1 for the PGA, 2 for the SGA, and 3 …
- TNS-00080 — * force_log - ask process_name to dump its state\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00081 — address range [ string , string ) is not readable 原因:An attempt was made to read/write an invalid memory address range. 处理:Try another address or leng…
- TNS-00081 — * trace_on - ask process name to turn tracing on\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00082 — memory size of string is not in valid set of [1], [2], [4] string string string string string 原因:An invalid length was specified for the POKE command.…
- TNS-00082 — NOTE: the user MUST specify a trace level\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00083 — warning: possibly corrupt SGA mapped 原因:Even though there may be SGA corruptions, the SGA was mapped. 处理:Use the DUMPSGA command to dump the SGA.
- TNS-00083 — (USER or ADMIN) in the argument field\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00084 — global area must be PGA, SGA, or UGA 原因:An attempt was made to dump an invalid global area. 处理:Specify either PGA, SGA, or UGA.
- TNS-00084 — * trace_off - ask process name to turn tracing off\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00085 — current call does not exist 原因:An invalid attempt was made to dump the current call heap. 处理:Wait until the process starts a call.
- TNS-00085 — * reread - ask the process name to reread parameter files\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00086 — user call does not exist 原因:An invalid attempt was made to dump the user call heap. 处理:Wait until the process starts a call.
- TNS-00086 — * reload - ask the Navigator to reload TNSNET.ORA\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00087 — command cannot be executed on remote instance 原因:Cluster database command issued for non cluster database ORADEBUG command. 处理:Issue the command witho…
- TNS-00087 — * version - ask the process name to display its version number\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00088 — command cannot be executed by shared server 原因:Debug command issued on shared server. 处理:Reissue the command using a dedicated server.
- TNS-00088 — * exit - quit the Interchange controller\n\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00089 — invalid instance number in ORADEBUG command 原因:An invalid instance number was specified in a cluster database ORADEBUG command. 处理:Reissue the command…
- TNS-00089 — process_name is one of Interchange, CMANAGER, or Navigator\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00090 — failed to allocate memory for cluster database ORADEBUG command 原因:Could not allocate memory needed to execute cluster database oradebug. 处理:Reissue t…
- TNS-00090 — * Interchange - will ask the Interchange\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00091 — LARGE_POOL_SIZE must be at least string 原因:The value of LARGE_POOL_SIZE is below the minimum size. 处理:Increase the value of LARGE_POOL_SIZE past the m…
- TNS-00091 — * Navigator (or navgatr) - will ask the Navigator only\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00092 — LARGE_POOL_SIZE must be greater than LARGE_POOL_MIN_ALLOC 原因:The value of LARGE_POOL_SIZE is less than the value of LARGE_POOL_MIN_ALLOC. 处理:Increase …
- TNS-00092 — * CMANAGER (or intlsnr) - will ask the Cmanager only\n\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00093 — string must be between string and string 原因:The parameter value is not in a valid range. 处理:Modify the parameter value to be within the specified rang…
- TNS-00093 — argument is only supplied to either status or trace_on\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00094 — string requires an integer value 原因:The parameter value is not an integer. 处理:Modify the parameter value to be an integer.
- TNS-00094 — * to status - argument is considered the remote process_name\n 原因:Help message displayed by INTCTL. 处理:None
- TNS-00095 — * to trace_on - argument is considered the trace level\n\n 原因:Help message displayed by INTCTL. 处理:None
- ORA-00096 — invalid value string for parameter string , must be from among string 原因:The value for the initialization parameter is invalid. 处理:Choose a value as i…
- ORA-00097 — use of Oracle SQL feature not in SQL92 string Level 原因:Usage of Oracle's SQL extensions. 处理:Do not use the feature or use the ALTER SESSION SET FLAGGE…
- ORA-00098 — creating or mounting the database requires a parameter file 原因:An attempt was made to create or mount the database when the instance was started witho…
- ORA-00099 — warning: no parameter file specified for string instance 原因:Even though no parameter file was specified, the instance was started with all default val…
- ORA-00100 — no data found 原因:An application made reference to unknown or inaccessible data. 处理:Handle this condition within the application or make appropriate mo…
- TNS-00100 — Unable to allocate memory 原因:Out of memory on the machine. 处理:Add more memory or run fewer processes.
- ORA-00101 — invalid specification for system parameter DISPATCHERS 原因:The syntax for the DISPATCHERS parameter is incorrect. 处理:Refer to the manual for correct sy…
- TNS-00101 — File operation error 原因:Error in accessing reading or writing a particular file. 处理:Check existence of or operating system access to the log and trace…
- ORA-00102 — network protocol string cannot be used by dispatchers 原因:The network specified in DISPATCHERS does not have the functionality required by the dispatch…
- PLS-00102 — parser stack overflow because nesting is too deep 原因:The parser, which checks the syntax of PL/SQL statements, uses a data structure called a stack; t…
- TNS-00102 — Keyword-Value binding operation error 原因:Not normally visible to the user. May indicate a shortage of memory. 处理:If error persists contact Oracle Cust…
- ORA-00103 — invalid network protocol; reserved for use by dispatchers 原因:The network specified in the SQL*Net connect string is reserved for use by the dispatcher…
- PLS-00103 — string 原因:This error message is from the parser. It found a token (language element) that is inappropriate in this context. 处理:Check previous tokens a…
- TNS-00103 — Parameter file load error 原因:Parameter file process failed. 处理:Check to make sure that all parameter files necessary for the Interchange are present (…
- ORA-00104 — deadlock detected; all public servers blocked waiting for resources 原因:All available public servers are servicing requests that require resources lock…
- PLS-00104 — empty argument list in call of procedure ' string ' must be omitted 原因:In a subprogram call, the name of the subprogram was followed by an empty param…
- TNS-00104 — Data stream open/access error 原因:Unable to open or access data stream for either log or trace files for the Interchange. 处理:Check read/write permissio…
- ORA-00105 — too many dispatcher configurations 原因:Too many dispatcher configurations have been specified. No more can be added. 处理:Consolidate the dispatcher conf…
- PLS-00105 — at most one forward declaration of type ' string ' is permitted 原因:More than one forward declaration of a type is redundant. 处理:Remove all but one for…
- TNS-00105 — Could not initialize tracing 原因:The INTCHG.ORA file is improperly configured. Verify the trace parameters specified. 处理:If error persists contact Orac…
- ORA-00106 — cannot startup/shutdown database when connected to a dispatcher 原因:An attempt was made to startup/shutdown database when connected to a shared server …
- PLS-00106 — double quote disallowed in a quoted identifier
- TNS-00106 — Failed to open log file 原因:Unable to access or obtain write permission to create log file. 处理:Check existence of or access to log file directory.
- ORA-00107 — failed to connect to ORACLE listener process 原因:Most likely due to the fact that ORACLE listener has not been started. 处理:Start ORACLE listener if it …
- TNS-00107 — Unable to initialize TNS global data 原因:Not normally visible to the user. 处理:If error persists contact Oracle Customer Support.
- ORA-00108 — failed to set up dispatcher to accept connection asynchronously 原因:Most likely due to the fact that the network protocol used by the the dispatcher do…
- PLS-00108 — declarative units must be a single variable declaration 原因:While checking a declarative unit (a top-level declare block without the BEGIN...END), PL/S…
- TNS-00108 — TNS_ADMIN not defined 原因:TNS_ADMIN pointer is not set. 处理:Set the TNS_ADMIN pointer before running application
- ORA-00109 — invalid value for attribute string : string 原因:The value specified for the attribute was incorrect. 处理:Refer to the manual for the proper values.
- PLS-00109 — unknown exception name ' string ' in PRAGMA EXCEPTION_INIT 原因:No declaration for the exception name referenced in an EXCEPTION_INIT pragma was found w…
- TNS-00109 — Message could not be printed; not enough memory 原因:Printing of message failed due to lack of memory. Not normally visible to user. 处理:Increase the res…
- ORA-00110 — invalid value string for attribute string , must be between string and string 原因:The value specified for the attribute was incorrect. 处理:Specify a val…
- PLS-00110 — bind variable ' string ' not allowed in this context 原因:A bind variable, that is, an identifier prefixed with a colon, was found in an inappropriate c…
- TNS-00110 — Could not initialize network from file TNSNET.ORA 原因:Poorly formed network information in network file. 处理:Fix network configuration data to assure th…
- ORA-00111 — invalid attribute string 原因:The specified attribute was not recognized. 处理:Refer to the manual for the proper keyword to use to specify a dispatcher a…
- PLS-00111 — end-of-file in comment 原因:A Comment had a comment initiator (/*), but before the 处理:Remove the Comment initiator or add a comment terminator. The line…
- TNS-00111 — Failed to get configuration data from file 原因:Poorly formed configuration information in network files TNSNET.ORA or TNSNAV.ORA. 处理:Check TNSNET.ORA a…
- ORA-00112 — value of string is null 原因:The attribute was specified with no value. 处理:Specify a non-null value.
- PLS-00112 — end-of-line in quoted identifier 原因:A quoted identifier had a beginning quote ("), but before the ending quote (") was found, an end-of-line marker wa…
- TNS-00112 — Failed to find configuration file name 原因:Name specified for configuration file was incorrect. 处理:Check for presence of the configuration file.
- ORA-00113 — protocol name string is too long 原因:A protocol name specified in the DISPATCHERS system parameter is too long. 处理:Use a valid protocol name for the DI…
- PLS-00113 — END identifier ' string ' must match ' string ' at line string , column string 原因:Following the keyword END, which terminates some language constructs…
- TNS-00113 — Failed to open error log file 原因:Could not open log file during startup of Navigator or Connection Manager due to read or write permission problems or…
- ORA-00114 — missing value for system parameter SERVICE_NAMES 原因:No value was specified for the SERVICE_NAMES system parameter, nor for the DB_NAME parameter. 处理:A…
- PLS-00114 — identifier ' string ' too long 原因:The name of a PL/SQL variable is longer than 30 characters. Legal identifiers (including quoted identifiers) have a …
- TNS-00114 — Internal error- Allocation of addresses not performed 原因:Internal error. Should not normally occur. 处理:Contact Oracle Customer Support.
- ORA-00115 — connection refused; dispatcher connection table is full 原因:A connection request was refused by a dispatcher because the dispatcher cannot support any …
- PLS-00115 — this PRAGMA must follow the declaration of ' string ' 原因:The pragma refers to a PL/SQL object that was not declared or is not within the scope of the …
- TNS-00115 — Could not allocate pump global buffers 原因:Not enough memory to allocate pump buffers. 处理:Decrease the number of PUMP_BUFFERS in INTCHG.ORA.
- ORA-00116 — SERVICE_NAMES name is too long 原因:A service name specified in the SERVICE_NAMES system parameter is too long. 处理:Use a shorter name in the SERVICE_NAM…
- PLS-00116 — Duplicate where-clause in table expression 原因:Two or more WHERE clauses were found in a DELETE, SELECT, or UPDATE statement. The WHERE clause specifie…
- TNS-00116 — Pump failed during initial bequeath 原因:Error in assigning connection to a new pump. This error may be caused by insufficient machine resources. 处理:Att…
- ORA-00117 — PROTOCOL, ADDRESS or DESCRIPTION must be specified 原因:PROTOCOL, ADDRESS or DESCRIPTION was not specified. 处理:Use one of the attributes: PROTOCOL, ADDR…
- PLS-00117 — Duplicate connect-by clause in table expression 原因:Two or more CONNECT BY clauses were found in a SELECT statement. The CONNECT BY clause defines a re…
- TNS-00117 — Internal error- No data passed through pump 原因:Internal error. Data expected has not arrived yet. 处理:If error persists, contact Oracle Customer Suppor…
- ORA-00118 — Only one of PROTOCOL, ADDRESS or DESCRIPTION may be specified 原因:More than one of PROTOCOL, ADDRESS or DESCRIPTION was specified. 处理:Use only one of t…
- PLS-00118 — Duplicate group-by clause in table expression 原因:Two or more GROUP BY clauses were found in a SELECT statement. The GROUP BY clause lists column expre…
- ORA-00119 — invalid specification for system parameter string 原因:The syntax for the specified parameter is incorrect. 处理:Refer to the Oracle Reference Manual for …
- PLS-00119 — Duplicate having-clause in table expression 原因:Two or more HAVING clauses were found in a SELECT statement. The HAVING clause specifies a condition un…
- TNS-00119 — Missing PUMP_CONNECTIONS in INTCHG.ORA 原因:No PUMP_CONNECTIONS parameter specified in INTCHG.ORA. 处理:Add PUMP_CONNECTIONS parameter to INTCHG.ORA.
- ORA-00120 — invalid 'shared_servers' value for the PDB 原因:'shared_servers' cannot be set to a non-zero value in a non-ROOT pluggable database (PDB). 处理:In a multi…
- PLS-00120 — inappropriate argument in OPEN statement 原因:The asterisk (*) option was used in the argument list of a SQL group function other than COUNT. For exampl…
- TNS-00120 — Missing PUMPS in INTCHG.ORA 原因:No PUMPS parameter specified. 处理:Add an appropriate number of PUMPS to INTCHG.ORA.
- TNS-00121 — Missing CMANAGER_NAME in INTCHG.ORA 原因:No CMANAGER_NAME parameter specified. 处理:Define the CMANAGER_NAME parameter in INTCHG.ORA; it must match the CM…
- ORA-00122 — cannot initialize network configuration 原因:ORACLE could not initialize SQL*Net version 2. 处理:Check the error stack for detailed information.
- TNS-00122 — Missing ADDRESS(es) in TNSNET.ORA file 原因:No ADDRESS or ADDRESS_LIST parameter specified in TNSNET.ORA. 处理:Define a valid set of ADDRESSes for the Con…
- ORA-00123 — idle public server terminating 原因:Too many idle servers were waiting on the common queue. 处理:This error is used internally, no action is required.
- PLS-00123 — program too large ( string ) 原因:The PL/SQL compiler has exceeded one of its capacity limits. The compiler cannot proceed. 处理:Revise the PL/SQL program…
- TNS-00123 — Unable to perform a listen on configured ADDRESS(es) 原因:Another process is already listening on this address or the ADDRESS is incorrectly defined. 处理…
- PLS-00124 — name of exception expected for first arg in exception_init pragma 原因:The first argument passed to the EXCEPTION_INIT pragma was something other than a…
- TNS-00124 — Internal error - Unable to create empty address 原因:- Internal error. Should not normally occur. 处理:If problem persists contact Oracle Customer Support…
- ORA-00125 — connection refused; invalid presentation 原因:The PRESENTATION in the CONNECT_DATA of the TNS address DESCRIPTION is not correct or is not supported. 处理…
- PLS-00125 — type name expected 原因:When a constant or variable was declared, its datatype was not specified. For example, the code might look like pi CONSTANT := 3…
- TNS-00125 — Failed to get number of Interchanges in TNSNET.ORA 原因:Error in the TNSNET.ORA file. 处理:Check the contents of TNSNET.ORA and eliminate errors. Regenera…
- ORA-00126 — connection refused; invalid duplicity 原因:The DUPLICITY in the CONNECT_DATA of the TNS address DESCRIPTION is not correct or is not supported. 处理:Corre…
- PLS-00126 — selector ALL is not allowed 原因:The ALL shortcut for specifying system privileges or statement options was used in a SQL statement. PL/SQL does not sup…
- TNS-00126 — Missing Connection Manager name and address in TNSNET.ORA 原因:The Interchange name specified in INTCHG.ORA is not defined in the TNSNET.ORA file. 处理:De…
- ORA-00127 — dispatcher string does not exist 原因:There is currently no dispatcher running with the specified name. 处理:Retry with a name of the form "D###" denoting…
- PLS-00127 — Pragma string is not a supported pragma 原因:The named pragma (compiler directive) is not among those supported by PL/SQL. The pragma name might be miss…
- TNS-00127 — Missing Connection Manager name in TNSNET.ORA 原因:One or more Connection Manager names are missing. 处理:Ensure that each Connection Manager name is defi…
- ORA-00128 — this command requires a dispatcher name 原因:Wrong syntax for ALTER SYSTEM SHUTDOWN 处理:Use correct syntax: ALTER SYSTEM SHUTDOWN [ IMMEDIATE ] 'dispatch…
- PLS-00128 — Illegal number of arguments for pragma string 原因:The number of arguments (actual parameters) passed to the named pragma (compiler directive) is incorr…
- TNS-00128 — Missing COMMUNITY in TNSNET.ORA 原因:One or more ADDRESSes does not have a COMMUNITY assigned. 处理:Ensure that all addresses have a COMMUNITY defined in …
- ORA-00129 — listener address validation failed ' string ' 原因:An error was encountered while validating the listener address. 处理:Resolve error or contact your ORAC…
- PLS-00129 — Pragma INTERFACE only supports C as its first argument 原因:The first parameter passed to pragma INTERFACE specified a host language other than C. Curre…
- TNS-00129 — Internal error - Failed to create new community 原因:Internal Error. Should not normally occur. There may be a resource limitation problem on the machin…
- ORA-00130 — invalid listener address ' string ' 原因:The listener address specification is not valid. 处理:Make sure that all fields in the listener address (protocol…
- PLS-00130 — Pragma string expects 1st argument to be a procedure/function/package/cursor 原因:The first argument (actual parameter) passed to the named pragma (comp…
- TNS-00130 — Failed to create Interchange's internal address 原因:There is an error in one of the addresses listed in TNSNET.ORA. 处理:Check the file for errors in def…
- ORA-00131 — network protocol does not support registration ' string ' 原因:The specified protocol does not support async notification. 处理:Refer to the manual for in…
- PLS-00131 — Pragma string expects 2nd argument to be a procedure/function 原因:The second argument (actual parameter) passed to the named pragma (compiler directive…
- TNS-00131 — Missing COMMUNITY in COMMUNITY_COST_LIST in TNSNET.ORA 原因:A COMMUNITY keyword-value pair is missing within the COMMUNITY_COST_LIST in TNSNET.ORA. 处理:D…
- ORA-00132 — syntax error or unresolved network name ' string ' 原因:Listener address has syntax error or cannot be resolved. 处理:If a network name is specified, chec…
- PLS-00132 — Pragma string does not support string 原因:One of the parameters passed to this pragma was not among the list of allowed values. The parameter might be …
- TNS-00132 — COST value must be an integer greater than 0 原因:A community has been defined in TNSNET.ORA with a COST of 0. 处理:Assign an alternate value that is grea…
- ORA-00133 — value of string is too long 原因:The value specified for the attribute was too long. 处理:Use shorter names and keywords or remove unneeded blanks.
- PLS-00133 — Pragma string expects 1st argument to be an identifier or string-literal 原因:The first argument (actual parameter) passed to the named pragma (compiler…
- TNS-00133 — Missing LOCAL_COMMUNITIES field in TNSNAV.ORA 原因:Improperly configured TNSNAV.ORA file. 处理:Define the LOCAL_COMMUNITIES fields correctly in TNSNAV.ORA…
- ORA-00134 — invalid DISPATCHERS specification # string 原因:The syntax for the n-th DISPATCHERS specification was incorrect. 处理:Refer to the Oracle Reference Manual…
- PLS-00134 — Pragma string expects 2nd argument to be an identifier or string-literal 原因:The second argument (actual parameter) passed to the named pragma (compile…
- TNS-00134 — Missing COMMUNITY component in addresses for the Navigator in TNSNAV.ORA 原因:The addresses specified for the Navigator have no COMMUNITY name. 处理:Ensur…
- ORA-00135 — missing attribute string 原因:The indicated mandatory attribute was not specified. 处理:Specify a non-null value for the attribute.
- PLS-00135 — Pragma string expects 3rd argument to be an identifier, string or numeric literal 原因:The fourth argument (actual parameter) passed to the named pragma…
- TNS-00135 — Missing TNS error message file 原因:No error message file present. 处理:Ensure that the ORACLE environment is correctly set for your platform and that the…
- ORA-00136 — invalid LISTENER_NETWORKS specification # string 原因:The syntax for the nth LISTENER_NETWORKS specification was invalid. 处理:Refer to the Oracle Referen…
- TNS-00136 — Did not register product/facility for TNS error message 原因:Error message file error. 处理:Ensure that the ORACLE environment is correctly set for your p…
- ORA-00137 — invalid LISTENER_NETWORKS specification with NAME= string 原因:The syntax for the LISTENER_NETWORKS specification with the indicated NAME was invalid. 处…
- TNS-00137 — Failed to get TNS error message file entry 原因:No TNS error message file present. 处理:Ensure that the ORACLE environment is correctly set for your platf…
- ORA-00138 — all addresses specified for attribute string are invalid 原因:All of the specified addresses or aliases for the attribute were invalid. 处理:Specify at le…
- PLS-00138 — Precision for a binary type must be one of 8, 16, or 32 原因:Invalid precision was specified for a signed or unsigned binary type. 处理:Specify precision …
- TNS-00138 — Failed to find ORACLE executable directory 原因:The ORACLE environment is not correctly set. 处理:Ensure that the ORACLE environment is correctly set and …
- ORA-00139 — duplicate attribute string 原因:The indicated attribute was specified more than once. 处理:Specify the attribute at most once.
- PLS-00139 — duplicate external NAME specification in subprogram expression 原因:The subprogram was found to have two external NAME specifications. 处理:Remove one of …
- TNS-00139 — Internal - Data passed from the Interchange listener is poorly formed 原因:Internal error in Interchange. 处理:Check that you are using compatible compone…
- ORA-00140 — LISTENER_NETWORKS specification with NAME= string not allowed 原因:An internal network name has been specified. 处理:Specify a different network name.
- PLS-00140 — duplicate external LIBRARY specification in subprogram expression 原因:The subprogram was found to have two external LIBRARY specifications. 处理:Remove o…
- TNS-00140 — Interchange specified was not found in network tables 原因:Could not find the Interchange specified in a control request. 处理:Check that the Interchange …
- ORA-00141 — all addresses specified for parameter string are invalid 原因:All of the specified addresses or aliases for the parameter were invalid. 处理:Specify at le…
- PLS-00141 — duplicate external PARAMETER STYLE specification in subprogram expression 原因:The subprogram was found to have two external PARAMETER STYLE specificati…
- TNS-00141 — Failed to get file stream information 原因:Error in the file stream package. 处理:None
- ORA-00142 — FORWARD_LISTENER and LOCAL_LISTENER are on the same network. 原因:FORWARD_LISTENER was used with LOCAL_LISTENER for the same network. 处理:Do not use FORW…
- PLS-00142 — duplicate external PARAMETER list specification in subprogram expression 原因:The subprogram was found to have two external PARAMETER STYLE specificatio…
- TNS-00142 — Community mismatch in TNSNAV.ORA 原因:The communities in the LOCAL_COMMUNITIES entry in TNSNAV.ORA do not correspond with all the communities in the NAV…
- ORA-00143 — The registration of a remote port is not supported without the registration of a local port. 原因:The remote HTTP/HTTPS port could not be registered wit…
- PLS-00143 — duplicate external LANGUAGE specification in subprogram expression 原因:The subprogram was found to have two external LANGUAGE specifications. 处理:Remove…
- TNS-00143 — Illegal PREFERRED_CMANAGERS entry in TNSNAV.ORA 原因:PREFERRED_CMANAGERS entry in the TNSNAV.ORA used by the Connection Manager. There should only be a …
- PLS-00144 — duplicate external CALLING STANDARD specification in subprogram expression 原因:The subprogram was found to have two external CALLING STANDARD specifica…
- TNS-00144 — PUMP_CONNECTIONS value in INTCHG.ORA is too large. 原因:The number of PUMP_CONNECTIONS specified in INTCHG.ORA is too large to be supported on this plat…
- PLS-00145 — duplicate external WITH CONTEXT specification in subprogram expression 原因:The subprogram was found to have two external WITH CONTEXT specifications. 处…
- TNS-00145 — PUMPS value in INTCHG.ORA is too large. 原因:The number of PUMPS specified in INTCHG.ORA is too large to be supported on this platform. 处理:Consult the O…
- PLS-00146 — duplicate external TRUSTED/UNTRUSTED specification in subprogram expression 原因:The subprogram was found to have two external TRUSTED/UNTRUSTED specifi…
- TNS-00146 — Internal-- Retry data request withing pump. 原因:The data space provided in order to receive data from the pump is to small. 处理:Operation must be retrie…
- PLS-00147 — LIBRARY or ASSEMBLY file specification string is empty 原因:A zero-length string was found for the LIBRARY or ASSEMBLY file specification. 处理:Specify a …
- TNS-00147 — Failed to start a pre-spawned pump. 原因:The Connection Manager was unable to start a pump during startup. 处理:Check all configuration parameters and ass…
- PLS-00148 — Only 1 pragma of this type is allowed per subprogram 原因:The subprogram was found to have two PRAGMA RESTRICT_REFERENCES. 处理:Remove one of the PRAGMA R…
- ORA-00150 — duplicate transaction ID 原因:Attempted to start a new transaction with an ID already in use by an existing transaction. 处理:Check your application.
- PLS-00150 — found: string but expected : INTEGER 原因:This error happens in the creation of a pl/sql external type: [SIGNED | UNSIGNED] BINARY INTEGER ( precision )…
- ORA-00151 — invalid transaction ID 原因:The specified transaction ID does not correspond to an existing valid transaction. 处理:Check your application.
- PLS-00151 — Expression or Variable is an illegal type to PLS/QL: string 原因:A type was used which does not belong PL/SQL. This type can only be referenced in CREAT…
- ORA-00152 — current session does not match requested session 原因:The current session is not the same as the session that was passed into a upixado() call. 处理:Check…
- PLS-00152 — POINTER type may only reference an object type. 原因:A POINTER type which does not belong to PL/SQL can only refer to an object type. This type can only…
- ORA-00153 — internal error in XA library 原因:The XA library could not access thread-specific pointers. 处理:Contact customer support.
- PLS-00153 — A string type may only be used as an object type attribute. 原因:A POINTER or [SIGNED/UNSIGNED] BINARY INTEGER can only be used as attributes of object …
- ORA-00154 — protocol error in transaction monitor 原因:The transaction monitor returned TMJOIN on an AX_REG call but the transaction was locally suspended. 处理:Conta…
- PLS-00154 — An object type may have only 1 MAP or 1 ORDER method. 原因:More than one map or order function was declared. An object type can have only one map functi…
- ORA-00155 — cannot perform work outside of global transaction 原因:The application tried to perform some work on either an Oracle 7.3 server or an Oracle8 server wi…
- PLS-00155 — Only a function may be a MAP, ORDER or CONSTRUCTOR method. 原因:A procedure was declared as a MAP, ORDER or CONSTRUCTOR method. Only functions can be MA…
- PLS-00156 — Null constraints not supported for object attributes. 原因:A null constraint was specified for an attribute in an object. This is not supported. 处理:Remo…
- PLS-00157 — Only schema-level programs allow string 原因:An AUTHID or DEFAULT COLLATION clause was specified for a subprogram inside a package or type. These clause…
- ORA-00160 — global transaction length string is illegal (maximum allowed string ) 原因:An external global transaction ID with a length either too large or 0 was pas…
- PLS-00160 — AUTHID must specify CURRENT_USER or DEFINER 原因:The only two allowed options for AUTHID are CURRENT_USER and DEFINER. 处理:Fix the AUTHID clause to speci…
- ORA-00161 — transaction branch length string is illegal (maximum allowed string ) 原因:An external transaction branch ID with a length either too large or 0 was pas…
- PLS-00161 — Pragma string expects 3rd argument to be an identifier or a string literal 原因:The third argument (actual parameter) passed to the named pragma (compil…
- ORA-00162 — external dbid length string is greater than maximum ( string ) 原因:An external database name with too large a length field was passed in. 处理:Report the…
- PLS-00162 — Pragma string expects 4th argument to be a positive integer literal 原因:The fourth argument (actual parameter) passed to the named pragma (compiler dir…
- ORA-00163 — internal database name length string is greater than maximum ( string ) 原因:An internal database name with a too large length field was passed in. 处理:R…
- ORA-00164 — distributed autonomous transaction disallowed within migratable distributed transaction 原因:A request was made by the application to start a distribute…
- PLS-00164 — cursor subqueries are not supported in this release 原因:This feature is not yet implemented. 处理:n/a
- ORA-00165 — migratable distributed autonomous transaction with remote operation is not allowed 原因:A request was made by the application to start a migratable dist…
- PLS-00165 — call statement is not supported in PL/SQL 原因:A CALL statement was found in PL/SQL source. 处理:Use an ordinary PL/SQL function or procedure call.
- ORA-00166 — remote/local nesting level is too deep 原因:Too many remote table operations required a reverse trip back to the local site, for example to execute a lo…
- PLS-00166 — bad format for date, time, timestamp or interval literal 原因:The contents of the date, time, timestamp or interval literal did not match the expected f…
- PLS-00167 — keyword BULK is used in a wrong context 原因:keyword BULK is used illegally. For example, BULK is used without INTO clause 处理:remove the keyword BULK.
- PLS-00168 — duplicate modifier specification ' string ' 原因:A method or object type modifier was specified more than once. 处理:Remove all but one occurence of the d…
- PLS-00169 — modifier ' string ' conflicts with prior ' string ' specification 原因:The method or object type modifier specified conflicts with an earlier modifier. …
- PLS-00170 — the SQL statement in an OPEN statement or FOR loop must be a SELECT 原因:An OPEN cursor statement or cursor FOR loop can only invoke a SELECT statement,…
- PLS-00171 — duplicate dedicated AGENT specification in subprogram expression 原因:The subprogram was found to have two dedicated AGENT specifications. 处理:Remove one…
- PLS-00172 — string literal too long 原因:The string literal was longer than 32767 bytes. 处理:Use a string literal of at most 32767 bytes.
- PLS-00173 — SPACE, TAB or RETURN are disallowed as alternative quote delimiters 原因:SPACE, TAB or RETURN was used as alternative quote delimiter. 处理:Use a characte…
- PLS-00174 — a static boolean expression must be used 原因:The expression contained a syntax or semantic error, or it did not have a boolean type or its evaluation r…
- PLS-00176 — unexpected preprocessor token '$ string ' 原因:A preprocessor token was used inappropriately. 处理:Remove the preprocessor token that is inappropriately u…
- PLS-00177 — '$ string ' preprocessor directive does not end properly 原因:A preprocessor directive was not ended properly. 处理:Use $end to end the preprocessor direc…
- PLS-00178 — a static character expression must be used 原因:The expression contained a syntax or semantic error, or it did not have a character type or its evaluati…
- PLS-00179 — $ERROR: string 原因:$ERROR directive was used. This is an expected error message. 处理:NA
- PLS-00180 — preprocessor directives are not supported in this context 原因:A preprocessor directive was used in a compilation unit for which conditional compilation…
- PLS-00181 — unsupported preprocessor directive ' string ' 原因:An unsupported preprocessor directive was used. 处理:Use a supported preprocessor directive.
- PLS-00182 — Identifier cannot be an empty string 原因:Identifier was declared using an empty string, 处理:rename the identifier to a non empty string.
- PLS-00183 — too many bind variables 原因:The library unit used more bind variables than permitted. (The current limit is 65535 bind variables in one library unit.) …
- PLS-00184 — misplaced START WITH clause 原因:A table expression specified a START WITH clause without the corresponding CONNECT BY clause. 处理:Specify a CONNECT BY c…
- PLS-00185 — invalid arguments for JSON call 原因:A JSON function was specified with arguments that were either invalid or not supported. 处理:Specify the correct argu…
- ORA-00200 — control file could not be created 原因:It was not possible to create the control file. 处理:Check that there is sufficient disk space and no conflicts in …
- TNS-00200 — Unable to do nsanswer on context\nresult= string \n 原因:Requester of service may have aborted or options negotiation failed. 处理:Try making the connecti…
- ORA-00201 — control file version string incompatible with ORACLE version string 原因:The compatible parameter was set to a lower version than in the control file or…
- PLS-00201 — identifier ' string ' must be declared 原因:You tried to reference either an undeclared variable, exception, procedure, or other item, or an item to whi…
- TNS-00201 — Unable to read answer connection data : string :\n 原因:Improperly formed connect data sent to the Interchange listener. 处理:If problem persists, check t…
- ORA-00202 — control file: ' string ' 原因:This message reports the name file involved in other messages. 处理:See associated error messages for a description of the p…
- PLS-00202 — type ' string ' must be declared 原因:An attempt was made to reference an undefined type. Either the type specifier was not declared or it is not within…
- TNS-00202 — Failure in redirecting call : \nOriginal to string \n\t Redirect to string \n 原因:Internal - error could not redirect call to a pump or other Interchan…
- ORA-00203 — using the wrong control files 原因:The mount ID in the control file is not the same as the mount ID in the control file used by the first instance to mo…
- PLS-00203 — function DECODE must be called with at least 3 non-boolean arguments 原因:Less than three arguments were passed to the built-in function DECODE. Though …
- TNS-00203 — Unable to start tracing in intlsnr\n 原因:Failure in setting up tracing for Interchange listener. 处理:Check file permissions in Network trace directory a…
- ORA-00204 — error in reading (block string , # blocks string ) of control file 原因:A disk I/O failure was detected on reading the control file. 处理:Check if the dis…
- PLS-00204 — function or pseudo-column ' string ' may be used inside a SQL statement only 原因:A pseudocolumn or proscribed function was used in a procedural stateme…
- TNS-00204 — Started tracing in intlsnr\n 原因:Internal message- Successfully started tracing information. 处理:None
- ORA-00205 — error in identifying control file, check alert log for more info 原因:The system could not find a control file of the specified name and size. 处理:Check …
- PLS-00205 — Aggregate not allowed here 原因:An aggregate, that is, a parenthesized list of values such as (7788, 'SCOTT', 20), was found in an inappropriate context…
- TNS-00205 — Turning off tracing in intlsnr\n 原因:Internal message - Turned off tracing in the Interchange listener. 处理:None
- ORA-00206 — error in writing (block string , # blocks string ) of control file 原因:A disk I/O failure was detected on writing the control file. 处理:Check if the dis…
- PLS-00206 — %%TYPE must be applied to a variable, column, field or attribute, not to " string " 原因:The program object declared using the %TYPE datatype attribute …
- TNS-00206 — \n\nStatus Information for Interchange string :\n 原因:Message sent back by Interchange as header for status request. 处理:None
- ORA-00207 — control files are not for the same database 原因:The database ID in the control file is not the same as the database ID in the control file used by the …
- PLS-00207 — identifier ' string ', applied to implicit cursor SQL, is not a legal cursor attribute 原因:An identifier that is not a cursor attribute was applied to …
- TNS-00207 — \tUptime : number days number hr. number min. number sec\n 原因:Part of status request. 处理:None
- ORA-00208 — number of control file names exceeds limit of string 原因:An attempt was made to use more control files than Oracle supports. 处理:Shut down Oracle. Reduc…
- PLS-00208 — identifier ' string ' is not a legal cursor attribute 原因:An identifier not declared as a cursor attribute was applied to an identifier declared as a c…
- TNS-00208 — \tLogging : string \n 原因:Part of status request. 处理:None
- ORA-00209 — control file blocksize mismatch, check alert log for more info 原因:The block size in the control file header does not match the size specified in the D…
- PLS-00209 — table ' string ' is not in FROM clause 原因:In a query, a table referenced by the select list is not named in the FROM clause. 处理:Check the spelling of …
- TNS-00209 — \tTracing : string \n 原因:Part of status request Interchange. 处理:None
- ORA-00210 — cannot open the specified control file 原因:Cannot open the control file. 处理:Check to make sure the control file exists and is not locked by some other …
- PLS-00210 — an OTHERS clause is required in this CASE statement 原因:Unless the clauses of a CASE statement mention all values of the type of the selecting expressi…
- TNS-00210 — \tTotal Pumps Available : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00211 — control file does not match previous control files 原因:A control file was specified that belongs to another database. 处理:Find and install the correct c…
- PLS-00211 — CASE labels or ranges must not be duplicated in different WHEN clauses 原因:In this CASE statement, a value appears in more than one WHEN clause. A valu…
- TNS-00211 — \tTotal Active Pumps : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00212 — block size string below minimum required size of string bytes 原因:The block size specified was too small. Space for the system overhead is required. 处理…
- PLS-00212 — could not obtain enough memory to compile CASE statement 原因:The CASE statement is too big. The compiler did not have enough storage to process it. 处理:…
- TNS-00212 — \tTotal Pumps Started : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00213 — cannot reuse control file; old file size string , string required 原因:To reuse a control file, it must be the same size as the one previously used. 处理:…
- PLS-00213 — package STANDARD not accessible 原因:The PL/SQL compiler could not find package STANDARD in the current Oracle database. To compile a program, PL/SQL ne…
- TNS-00213 — \tAvailable Connections : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00214 — control file ' string ' version string inconsistent with file ' string ' version string 原因:An inconsistent set of control files, datafiles/logfiles, a…
- PLS-00214 — BEGIN...END block nesting is too deep 原因:The number of levels of nesting in the PL/SQL block is too large. Blocks can be nested up to 255 levels deep,…
- TNS-00214 — \tTotal Connections in Use : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00215 — must be at least one control file 原因:No control file is specified or the control file specified does not exist. 处理:Specify at least one valid control …
- PLS-00215 — String length constraints must be in range (1 .. 32767) 原因:When a character variable was declared, a length outside the legal range was specified. For…
- TNS-00215 — \tTotal Successful Connections : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00216 — control file could not be resized for migration from 8.0.2 原因:The control file created by release 8.0.2 was missing some record types. These record ty…
- PLS-00216 — NUMBER precision constraint must be in range (1 .. 38) 原因:A NUMBER variable was declared with a precision that is outside the legal range. Declaration…
- TNS-00216 — \tTotal Failed Connections : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00217 — control file could not be resized for new record types 原因:The control file was missing some new record types supported by this release. These record t…
- PLS-00217 — NUMBER scale constraint must be in range (-84 .. 127) 原因:A NUMBER variable was declared with a scale that is outside the legal range. Declarations suc…
- TNS-00217 — \tTotal Bytes of Data : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00218 — block size string of control file ' string ' does not match DB_BLOCK_SIZE ( string ) 原因:The block size as stored in the control file header is differe…
- PLS-00218 — a variable declared NOT NULL must have an initialization assignment 原因:In general, variables that have no initialization clause in their declaration a…
- TNS-00218 — \tCurrent Bytes/Sec. : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00219 — required control file size ( string logical blocks) exceeds maximum allowable size ( string logical blocks) 原因:An invocation of CREATE DATABASE or CRE…
- PLS-00219 — label ' string ' reference is out of scope 原因:A block or loop label was used to qualify a variable (as in outer_block.date) that was not declared or i…
- TNS-00219 — \tPump Strategy : string \n 原因:Part of status request. 处理:None
- ORA-00220 — control file not mounted by first instance, check alert log for more info 原因:The specified control file has a different mount ID than the other contro…
- PLS-00220 — simple name required in this context 原因:A qualified name such as A.B or A.B.C is not permitted here. 处理:Use a simple name such as A instead.
- TNS-00220 — \tPump Breakdown\n\t--------------\n 原因:Part of status request. 处理:None
- ORA-00221 — error on write to control file 原因:An error occurred when writing to one or more of the control files. 处理:See accompanying messages.
- PLS-00221 — ' string ' is not a procedure or is undefined 原因:An identifier being referenced as a procedure was not declared or actually represents another object …
- TNS-00221 — \tPump Connections Total Data Bytes/Second\n 原因:Part of status request. 处理:None
- ORA-00222 — operation would reuse name of a currently mounted control file 原因:The filename supplied as a parameter to the ALTER DATABASE BACKUP CONTROLFILE comman…
- PLS-00222 — no function with name ' string ' exists in this scope 原因:An identifier being referenced as a function was not declared or actually represents another …
- TNS-00222 — \t-------------------------------------------------------------------\n 原因:Part of status request. 处理:None
- ORA-00223 — convert file is invalid or incorrect version 原因:An Oracle7 to Oracle8 convert file contains invalid data or was created with an different version of t…
- PLS-00223 — paramaterless procedure ' string ' used as function 原因:An identifier being referenced as a parameterless function actually represents a procedure. 处理:…
- TNS-00223 — \t number number number number \n 原因:Part of status request. 处理:None
- ORA-00224 — control file resize attempted with illegal record type ( string ) 原因:An attempt was made to expand or shrink the control file by calling cfileResizeSe…
- PLS-00224 — object ' string ' must be of type function or array to be used this way 原因:An identifier being referenced as a function or an array actually represent…
- TNS-00224 — No more connections available\n 原因:More connections were made to the Interchange than are configured in INTCHG.ORA. 处理:Wait until the Interchange is n…
- ORA-00225 — expected size string of control file differs from actual size string 原因:The expected size of the control file as stored in its header was different th…
- PLS-00225 — subprogram or cursor ' string ' reference is out of scope 原因:The prefix in a qualified name was a subprogram or cursor which was not in an enclosing s…
- TNS-00225 — Unable to bequeath connection to pump\n 原因:Unable to start a pump because either the executable cannot be found or too many processes aare currently r…
- ORA-00226 — operation disallowed while alternate control file open 原因:The attempted operation could not be executed at this time because this process had an alter…
- PLS-00226 — package ' string ' used as variable reference 原因:A package was referenced in an expression as if it were a variable or function. Either the name of th…
- TNS-00226 — Unable to contact pump number to send broadcast message string \n 原因:Could not call a particular pump. 处理:None, but if the problem persists call Oracl…
- ORA-00227 — corrupt block detected in control file: (block string , # blocks string ) 原因:A block header corruption or checksum error was detected on reading the c…
- PLS-00227 — subprogram 'in' formal string is not yet denotable 原因:When the formal parameters of a subprogram were declared, one parameter was used to initialize a…
- TNS-00227 — Unable to contact pump; Connection Manager declared pump dead\n 原因:A pump became an orphaned process. A protocol adapter is not working properly or ma…
- ORA-00228 — length of alternate control file name exceeds maximum of string 原因:The specified filename, which was supplied as a parameter to cfileSetSnapshotName o…
- PLS-00228 — Illegal declaration of variable of type LONG 原因:An attempt was made to declare a variables to be of type LONG. Only columns can be of type LONG. CAUSE…
- TNS-00228 — Failure in finding pump data\n 原因:Internal problem with data passed back from pump. 处理:None
- ORA-00229 — operation disallowed: already hold snapshot control file enqueue 原因:The attempted operation cannot be executed at this time because this process curre…
- PLS-00229 — Attribute expression within SQL expression 原因:An attribute expression, such as SQL%NOTFOUND, was used in a SQL statement, but attribute expressions ar…
- TNS-00229 — Error in call: unable to deliver message\n: string :\n string \n string \n string \n 原因:Destination for call is unavailable. 处理:None
- ORA-00230 — operation disallowed: snapshot control file enqueue unavailable 原因:The attempted operation cannot be executed at this time because another process cur…
- PLS-00230 — OUT and IN OUT formal parameters may not have default expressions 原因:When the formal parameters of a procedure were declared, an OUT or IN OUT paramet…
- TNS-00230 — Cannot start new pump process:\n string \n string \nProtocol Adapter errors: number 原因:Unable to create a new process; possibly there are too many pro…
- ORA-00231 — snapshot control file has not been named 原因:During an invocation of cfileMakeAndUseSnapshot or cfileUseSnapshot it was detected that no filename for t…
- PLS-00231 — function ' string ' may not be used in SQL 原因:A proscribed function was used in a SQL statement. Certain functions such as SQLCODE and SQLERRM can be …
- TNS-00231 — Pump is alive\n 原因:Pump log message sent to Interchange listener. 处理:None
- ORA-00232 — snapshot control file is nonexistent, corrupt, or unreadable 原因:The snapshot control file was found to be nonexistent, corrupt, or unreadable during a…
- PLS-00232 — nested packages not permitted 原因:A package was declared inside another package, but package declarations are allowed only at the top level. In other w…
- TNS-00232 — Unable to setup connection\n 原因:Error log message sent from pump to indicate failure in initiating connection because of errors in the call string: ne…
- ORA-00233 — copy control file is corrupt or unreadable 原因:The specified copy control file was found to be corrupt or unreadable during an invocation of cfileUseCo…
- PLS-00233 — function name used as an exception name in when clause 原因:The WHEN clause in an exception handler contains a function call instead of an exception nam…
- TNS-00233 — Interchange failed to make contact with destination with errors:\n string \n string \n string \n 原因:Pump call to destination failed. 处理:Check destinat…
- ORA-00234 — error in identifying or opening snapshot or copy control file 原因:A snapshot or copy control file of the specified name could not be found or opened du…
- PLS-00234 — PARAMETER STYLE SQL may not be specified with a PARAMATERS list 原因:A subprogram cannot specify both PARAMETER STYLE SQL and an explicit PARAMETERS lis…
- TNS-00234 — Connect data for failed call:\nCALL DATA =\n string \nRECEIVE DATA = : string :\n 原因:Connect data supplied for error 00233. 处理:None
- ORA-00235 — control file read without a lock inconsistent due to concurrent update 原因:Concurrent update activity on a control file caused a process to read incons…
- PLS-00235 — the external type is not appropriate for the parameter 原因:An unsuccessful attempt was made to convert a parameter to the specified external parameter …
- TNS-00235 — Aborting connection:\nProtocol Apapter errors:\n string ; number , number \n string ; number , number \n 原因:Pump aborting connection because connectio…
- ORA-00236 — snapshot operation disallowed: mounted control file is a backup 原因:Attempting to invoke cfileSetSnapshotName, cfileMakeAndUseSnapshot, or cfileUseSnap…
- PLS-00236 — Invalid external type specification for string . 原因:The external type specified is not valid for one of the following: INDICATOR, LENGTH, MAXLEN, TDO,…
- TNS-00236 — Failed to initialize tracing\n 原因:Pump failed to initialize tracing. 处理:Check that INTCHG.ORA is properly configured.
- ORA-00237 — snapshot operation disallowed: control file newly created 原因:An attempt to invoke cfileMakeAndUseSnapshot with a currently mounted control file that w…
- PLS-00237 — invalid BY VALUE indicator or length specification 原因:BY VALUE was specified with an indicator or length parameter that is being passed in OUT or IN O…
- TNS-00237 — Failed to refuse connection\n 原因:Connection may have aborted before error took place in Pump. 处理:None
- ORA-00238 — operation would reuse a filename that is part of the database 原因:The filename supplied as a parameter to the ALTER DATABASE BACKUP CONTROLFILE command…
- PLS-00238 — external parameter name string not found in formal parameter list 原因:An external parameter name was specified that does not match one in the formal pa…
- TNS-00238 — Pump number @: string : 原因:Prepended message to all pump log messages. 处理:None
- ORA-00239 — timeout waiting for control file enqueue: held by ' string ' for more than string seconds 原因:The specified process waited the maximum allowed time for…
- PLS-00239 — invalid external type specification for SQLCODE 原因:An inappropriate external parameter type was specified for the SQLCODE parameter. 处理:Correct the SQ…
- TNS-00239 — Connection Manager has been stopped 原因:Message sent back to control program from Interchange. 处理:None
- ORA-00240 — control file enqueue held for more than string seconds 原因:The current process did not release the control file enqueue within the maximum allowed time…
- PLS-00240 — Invalid type specification for RETURN indicator, length, tdo, duration 原因:An inappropriate external parameter type was specified for the RETURN indica…
- TNS-00240 — Connection Manager: Logging is now ON 原因:Message sent back to control program from Interchange. 处理:None
- ORA-00241 — operation disallowed: control file is not yet checked against data dictionary 原因:Either the control file was recently created by using CREATE CONTROLF…
- PLS-00241 — invalid external type specification for SQLSTATE 原因:An inappropriate external parameter type was specified for the SQLSTATE parameter. 处理:Correct the …
- TNS-00241 — Connection Manager: Logging is now OFF 原因:Message sent back to control program from Interchange. 处理:None
- ORA-00242 — maximum allowed filename records used up in control file 原因:Failed to create a new filename record entry in the control file because the maximum allow…
- PLS-00242 — invalid external type specification for CONTEXT 原因:An inappropriate external parameter type was specified for the CONTEXT parameter. 处理:Correct the CO…
- TNS-00242 — Connection Manager: Tracing is now ON 原因:Message sent back to control program from Interchange. 处理:None
- ORA-00243 — failed to expand control file filename section by string records 原因:Failed to expand control file filename section. See alert log for more details. 处理…
- PLS-00243 — invalid external type specification for SQLNAME 原因:An inappropriate external parameter type was specified for the SQLNAME parameter. 处理:Correct the SQ…
- TNS-00243 — Connection Manager: Tracing is now OFF 原因:Message sent back to control program from Interchange. 处理:None
- ORA-00244 — concurrent control file backup operation in progress 原因:Failed to create a control file backup because concurrent control file backup operation was in…
- PLS-00244 — Multiple declarations in foreign function formal parameter list 原因:There are multiple declarations of at least one the following FORMAL, INDICATOR, LE…
- TNS-00244 — Connection Manager: Request Failed 原因:Message sent back to control program from Interchange. 处理:None
- ORA-00245 — control file backup failed; in Oracle RAC, target might not be on shared storage 原因:Failed to create a control file backup because some process signal…
- PLS-00245 — Formals used in the 'parameters' clause must appear exactly once 原因:There are multiple declarations of the formal parameter in the PARAMETERS clause. …
- TNS-00245 — Connection Manager: Failed to open log file 原因:Message sent back to control program from Interchange. 处理:None
- ORA-00246 — control file backup failed; error accessing backup target 原因:An attempt to create a control file backup failed because some process signaled an I/O er…
- PLS-00246 — PARAMETER STYLE is unsupported 原因:A PARAMETER STYLE clause was placed in the external subprogram body. 处理:Remove the PARAMETER STYLE clause.
- TNS-00246 — Connection Manager: Failed to start tracing 原因:Message sent back to control program from Interchange. 处理:None
- PLS-00247 — LIBRARY or ASSEMBLY name must be specified 原因:The LIBRARY or ASSEMBLY name is missing from the external subprogram body. 处理:The LIBRARY or ASSEMBLY na…
- TNS-00247 — Unable to allocate memory for configuration data from TNSNET.ORA file 原因:Navigator failed to allocate enough memory for TNSNET.ORA configuration file.…
- PLS-00248 — Invalid Library Syntax 原因:The LIBRARY syntax was entered incorrectly. 处理:Correct the LIBRARY syntax and recompile.
- TNS-00248 — Unable to get information from file : string :\nExiting with NR error: number \n 原因:TNSNAV.ORA poorly configured or addresses provided are already bei…
- PLS-00249 — Invalid WITH CONTEXT Syntax 原因:CONTEXT was used in a WITH CONTEXT or a PARAMETERS clause. This is invalid. 处理:Check if WITH CONTEXT is used without sp…
- TNS-00249 — Unable to read network configuration data from file string \n with error:\n string \n 原因:Network configuration file TNSNET.ORA is missing or poorly co…
- ORA-00250 — archiver not started 原因:An attempt was made to stop automatic archiving, but the archiver process was not running. 处理:No action required.
- PLS-00250 — Incorrect Usage of string in parameters clause. 原因:The usage of Keywords such as MAXLEN, LENGTH, CHARSETID, CHARSETFORM RETURN in the parameters claus…
- TNS-00250 — Navigator has been started\n 原因:Message to log file on Navigator startup. 处理:None
- ORA-00251 — LOG_ARCHIVE_DUPLEX_DEST cannot be the same destination as string string 原因:The destination specified by the LOG_ARCHIVE_DUPLEX_DEST parameter is the s…
- PLS-00251 — RETURN, for actual function return, must be last in the parameters clause 原因:RETURN specification for the actual function return, used within the para…
- TNS-00251 — Failure in nstest: \n 原因:NS test operation failed due to internal error. 处理:If the problem persists there may be a network problem or resource limitat…
- ORA-00252 — log string of thread string is empty, cannot archive 原因:A log must be used for redo generation before it can be archived. The specified redo log was n…
- PLS-00252 — reference to the wrong copy of package STANDARD 原因:A reference is made to the fixed package version of STANDARD when the database is open, or to the o…
- TNS-00252 — Unable to handle route request:\n string \n 原因:Command requested did not exist. 处理:None
- ORA-00253 — character limit string exceeded by archive destination string string 原因:The destination specified by an ALTER SYSTEM ARCHIVE LOG START TO command was …
- PLS-00253 — Formal parameter string missing in the parameters clause 原因:The parameter clause does not have a matching parameter for a parameter specified in the f…
- TNS-00253 — Error in reading network configuration data from file string \n with error\n string \n 原因:TNSNET.ORA is poorly configured or nonexistent. 处理:Check to …
- ORA-00254 — error in archive control string ' string ' 原因:The specified archive log location is invalid in the archive command or the LOG_ARCHIVE_DEST initializat…
- PLS-00254 — OUT and IN/OUT modes cannot be used in this context 原因:actual parameter mode (OUT, or IN/OUT) is not used properly in USING clause. For USING clause i…
- TNS-00254 — Navigator has been stopped\n 原因:Message sent to Interchange control program by Navigator confirming it has been stopped. 处理:None
- ORA-00255 — error archiving log string of thread string , sequence # string 原因:An error occurred during archiving. 处理:Check the accompanying message stack for mor…
- PLS-00255 — CALL Specification parameters cannot have default values 原因:CALL Specification formal parameters default values are disallowed. 处理:Remove the default …
- TNS-00255 — Closing down log, stopping Navigator\n 原因:Log message when Navigator is stopped. 处理:None
- ORA-00256 — cannot translate archive destination string string 原因:The destination specified by an ALTER SYSTEM ARCHIVE LOG START TO command could not be translate…
- PLS-00256 — string is not a valid external library or assembly 原因:The supplied external library or assembly name in the external clause is not a valid alias libra…
- TNS-00256 — Status of Navigator:\n 原因:Navigator status message component 处理:None
- ORA-00257 — Archiver error. Connect AS SYSDBA only until resolved. 原因:The archiver process received an error while trying to archive a redo log. If the problem is…
- PLS-00257 — illegal use of EXTERNAL clause in a TYPE or PACKAGE specification 原因:An EXTERNAL Clause was detected in a TYPE Specification or a PACKAGE specificatio…
- TNS-00257 — \tNumber of Successful Requests : number \n 原因:Navigator status message component 处理:None
- ORA-00258 — manual archiving in NOARCHIVELOG mode must identify log 原因:The database is in NOARCHIVELOG mode and a command to manually archive a log did not specif…
- PLS-00258 — constrained datatypes disallowed in CALL Specifications 原因:A call specification for C or Java cannot have constraints on the PL/SQL formal parameter t…
- TNS-00258 — \tNumber of Failed Requests : number \n 原因:Navigator status message component 处理:None
- ORA-00259 — log string of open instance string (thread string ) is the current log, cannot archive 原因:An attempt was made to archive the current log of an open th…
- PLS-00259 — rights model (AUTHID) must be specified 原因:It is mandatory to specify the rights model if a PL/SQL PROCEDURE, FUNCTION, PACKAGE OR TYPE HAS CALL-Speci…
- TNS-00259 — \tDisabled Interchange list:\n\t\n 原因:Navigator status message component 处理:None
- ORA-00260 — cannot find online log sequence string for thread string 原因:The log sequence number supplied to the archival command does not match any of the online …
- PLS-00260 — Datetime/Interval constraints must be in range (0 .. 9) 原因:A Datetime/Interval variable or attribute was declared with a constraint outside the legal …
- TNS-00260 — \t-------------------------------------------------------------------\n 原因:Navigator status message component 处理:None
- ORA-00261 — log string of thread string is being archived or modified 原因:The log is either being archived by another process or an administrative command is modif…
- PLS-00261 — Java CALL Specification not yet allowed as a method in an object type 原因:A call specification declaring that an implementation is in Java has been fou…
- TNS-00261 — \tInterchange Name Community Link Down Time Remaining (secs) \n 原因:Navigator status message component 处理:None
- ORA-00262 — current log string of closed thread string cannot switch 原因:The log cannot be cleared or manually archived because it is the current log of a closed t…
- PLS-00262 — incorrect placement of string clause 原因:An ACCESSIBLE BY clause was specified in the wrong place. This clause may be specified on top-level stored pro…
- TNS-00262 — string string number \n 原因:Navigator status message component 处理:None
- ORA-00263 — there are no logs that need archiving for thread string 原因:An attempt was made to manually archive the unarchived logs in this thread but no logs need…
- PLS-00263 — mismatch between string on a subprogram specification and body 原因:An ACCESSIBLE BY clause was specified in a package body for an item which did not ha…
- TNS-00263 — Navigator: Request Failed 原因:Response from Navigator when a particular request failed. 处理:None
- ORA-00264 — no recovery required 原因:An attempt was made to perform media recovery on files that do not // need any type of recovery. 处理:Do not attempt to perform …
- TNS-00264 — Navigator: Failed to reload configuration data 原因:Message sent to the Interchange control program when reload of network configuration failed. TNSNET.…
- ORA-00265 — instance recovery required, cannot set ARCHIVELOG mode 原因:The database either crashed or was shutdown with the ABORT option. Media recovery cannot be …
- TNS-00265 — Navigator: Reloaded network configuration data 原因:Message sent to Interchange control program when reload of network is successful. 处理:None
- ORA-00266 — name of archived log file needed 原因:During media recovery, the name of an archived redo log file was requested, but no name was entered. 处理:Mount the …
- TNS-00266 — Navigator: Unknown Request 原因:Request was made to Navigator that it knows nothing about. 处理:None
- ORA-00267 — name of archived log file not needed 原因:During media recovery, the name of an archived redo log file was entered, but no name was requested. 处理:Contin…
- TNS-00267 — Navigator: Internal Error 原因:Generated when a request was made to the Navigator it knows nothing about. 处理:None
- ORA-00268 — specified log file does not exist ' string ' 原因:The given redo log file does not exist. 处理:Check the spelling and capitalization of the filename and r…
- TNS-00268 — ON 原因:On component of message. 处理:None
- ORA-00269 — specified log file is part of thread string not string 原因:The given redo log file is not part of the given thread 处理:Check that the thread of the redo…
- TNS-00269 — OFF 原因:Off component of message. 处理:None
- ORA-00270 — error creating archive log string 原因:An error was encountered when either creating or opening the destination file for archiving. 处理:Check that the ar…
- TNS-00270 — string : Terminal Error\n string \n 原因:Message put out in error file of executable when it fails to start. 处理:None
- ORA-00271 — there are no logs that need archiving 原因:An attempt was made to archive the unarchived redo log files manually, but there are no files that need to be…
- TNS-00271 — Connection Manager 原因:Name of the Connection Manager. 处理:None
- ORA-00272 — error writing archive log string 原因:An I/O error occurred while archiving a redo log file. 处理:Check that the output device is still available and corr…
- TNS-00272 — Navigator 原因:Name for the Navigator. 处理:None
- ORA-00273 — media recovery of direct load data that was not logged 原因:A media recovery session encountered a table that was loaded by the direct loader without lo…
- TNS-00273 — Navigator: Logging is now ON 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00274 — illegal recovery option string 原因:An illegal option was specified for a recovery command. 处理:Correct the syntax and retry the command.
- TNS-00274 — Navigator: Logging is now OFF 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00275 — media recovery has already been started 原因:An attempt was made to start a second media recovery operation in the same session. 处理:Complete or cancel t…
- TNS-00275 — Navigator: Tracing is now ON 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00276 — CHANGE keyword specified but no change number given 原因:The CHANGE keyword was specified on the command line, but no change number was given. 处理:Retry …
- TNS-00276 — Navigator: Tracing is now OFF 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00277 — illegal option to the UNTIL recovery flag string 原因:Only CANCEL, CHANGE, CONSISTENT and TIME can be used with the UNTIL keyword. 处理:Correct the syntax…
- TNS-00277 — Navigator: Request Failed 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00278 — log file ' string ' no longer needed for this recovery 原因:The specified redo log file is no longer needed for the current recovery. 处理:No action requi…
- TNS-00278 — Navigator: Failed to Open Log file 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00279 — change string generated at string needed for thread string 原因:The requested log is required to proceed with recovery. 处理:Please supply the requested l…
- TNS-00279 — Navigator: Failed to Start Tracing 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00280 — change string for thread string is in sequence # string 原因:This message helps to locate the redo log file with the specified change number requested b…
- TNS-00280 — \tMax Avg Bytes/Sec : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00281 — media recovery may not be performed using dispatcher 原因:An attempt was made to use a dispatcher process for media recovery. Memory requirements disall…
- TNS-00281 — Connection Manager: Forced Log output\n 原因:Message sent back to control program from Connection Manager. 处理:None
- ORA-00282 — UPI string call not supported, use ALTER DATABASE RECOVER 原因:The given UPI call is no longer supported. 处理:Use the ALTER DATABASE RECOVER command for …
- TNS-00282 — Connection Manager: Failed to force log, logging is off\n 原因:Message sent back to control program from Connection Manager. 处理:None
- ORA-00283 — recovery session canceled due to errors 原因:An error during recovery was determined to be fatal enough to end the current recovery session. 处理:More spe…
- TNS-00283 — \nListening on the following TNS addresses:\n\n 原因:Message sent back to control program from Connection Manager. 处理:None
- ORA-00284 — recovery session still in progress 原因:An error during recovery was determined to be minor enough to allow the current recovery session to continue. 处理…
- TNS-00284 — \tImm Max Avg Bytes/Sec : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00285 — TIME not given as a string constant 原因:TIME was not followed by a string constant for the time. 处理:Enter the time enclosed in single quotation marks.
- TNS-00285 — \tAvg Connect Time (secs) : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00286 — no members available, or no member contains valid data 原因:None of the members of a redo log file group are available, or the available members do not …
- TNS-00286 — \tMax Connect Time (secs) : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00287 — specified change number string not found in thread string 原因:The given change number does not appear in any of the online redo logs for the given thre…
- TNS-00287 — \tMin Connect Time (secs) : number \n 原因:Part of status request for Connection Manager. 处理:None
- ORA-00288 — to continue recovery type ALTER DATABASE RECOVER CONTINUE 原因:During media recovery, a new log is not required but the continuation command is necessar…
- TNS-00288 — Navigator: Failed to Disable Interchange 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00289 — suggestion : string 原因:This message reports the next redo log filename that is needed, according to the initialization parameters LOG_ARCHIVE_DEST and…
- TNS-00289 — Navigator: Disabled Interchange 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00290 — operating system archival error occurred. See error below 原因:While attempting to archive to a redo log file, the server encountered an unexpected oper…
- TNS-00290 — Navigator: Failed to Enable Interchange 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00291 — numeric value required for PARALLEL option 原因:A recovery command was specified incorrectly. The PARALLEL option must be followed by a numeric argument…
- TNS-00291 — Navigator: Enabled Interchange 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00292 — parallel recovery feature not installed 原因:A parallel recovery was requested when the parallel recovery option is not installed. 处理:Delete the PARALLE…
- TNS-00292 — \tLog File Name :\n\t\t string \n 原因:Message sent back to control program showing log file name 处理:None
- ORA-00293 — control file out of sync with redo log 原因:The redo log file and control file are out of sync because a non-current controle file was specified when th…
- TNS-00293 — \tTrace File Name :\n\t\t string \n 原因:Message sent back to control program showing trace file name 处理:None
- ORA-00294 — invalid archivelog format specifier ' string ' 原因:An invalid format specifier was found in the LOG_ARCHIVE_FORMAT initialization parameter. The only c…
- TNS-00294 — Connection Manager: Security is enabled, you cannot STOP the Interchange\n 原因:Message sent back to control program indicating that the connection mana…
- ORA-00295 — datafile/tempfile number string is invalid, must be between 1 and string 原因:An invalid file number was specified. 处理:Specify a valid datafile or tempf…
- TNS-00295 — Navigator: Security is enabled, you cannot STOP the Navigator\n 原因:Message sent back to control program indicating that the Navigator is secure. 处理:No…
- ORA-00296 — maximum number of files ( string ) exceeded for RECOVER DATAFILE LIST 原因:The RECOVER DATAFILE LIST command specified more datafiles than are allowed b…
- TNS-00296 — \tStoppable : string \n 原因:Message sent back to control program indicating whether program can be stopped. 处理:None
- ORA-00297 — must specify RECOVER DATAFILE LIST before RECOVER DATAFILE START 原因:The RECOVER DATAFILE START command was issued, but no RECOVER DATAFILE LIST comman…
- TNS-00297 — \tLogging Level : string \n 原因:Message sent back to control program indicating whether program can be stopped. 处理:None
- ORA-00298 — Missing or invalid attribute value 原因:A non-zero integer value is required when the following keyword attributes are specified: TIMEOUT, EXPIRE, DELAY…
- TNS-00298 — Request to Navigator:\n string \n 原因:Log entry for request to Navigator. 处理:None
- ORA-00299 — must use file-level media recovery on data file string 原因:The control file does not contain an entry for this file, so block media recovery cannot be …
- TNS-00299 — Response from Navigator:\n string \n 原因:Log entry for request to Navigator. 处理:None
- ORA-00300 — illegal redo log block size string specified - exceeds limit of string 原因:The specified block size of the redo log is greater than the maximum block s…
- TNS-00300 — ***Disabling Interchange : string \n 原因:Log entry for disabling a particular Interchange. 处理:None
- ORA-00301 — error in adding log file ' string ' - file cannot be created 原因:The creation of the redo log file failed 处理:Check: 1) there is enough storage space on…
- PLS-00301 — Invalid GOTO to non-label ' string ' 原因:A GOTO was attempted to something which is not a label (for example, a variable). 处理:Specify a valid label nam…
- TNS-00301 — ***Enabling Interchange : string \n 原因:Log entry for disabling a particular Interchange. 处理:None
- ORA-00302 — limit of string logs exceeded 原因:The maximum number of redo log files has been exceeded. 处理:Use the CREATE CONTROLFILE command with a larger value for…
- PLS-00302 — component ' string ' must be declared 原因:In a reference to a component (for example, in the name "A.B", "B" is a component of "A"), the component has …
- TNS-00302 — Connection Manager: Unknown Request 原因:Request sent by Interchange control program is unknown. 处理:None
- ORA-00303 — cannot process Parallel Redo 原因:A redo log containing Parallel Redo has been detected. The current Oracle release cannot process this format of redo. …
- PLS-00303 — qualifier ' string ' must be declared 原因:In a name such as "A.B", "A" is the qualifier, and "B" is a component of the qualifier. This error occurs whe…
- TNS-00303 — Connection Manager: Reread parameter data 原因:Request sent by control manager to control programming indicating that parameter data was read. 处理:None
- ORA-00304 — requested INSTANCE_NUMBER is busy 原因:An instance tried to start by using a value of the initialization parameter INSTANCE_NUMBER that is already in us…
- PLS-00304 — cannot compile body of ' string ' without its specification 原因:The compiled package specification required to compile a package body could not be foun…
- TNS-00304 — Status Information for Connection Manager:\n 原因:Message sent back by Interchange as header for status request. 处理:None
- ORA-00305 — log string of thread string inconsistent; belongs to another database 原因:The database ID in the redo log file does not match the database ID in the co…
- PLS-00305 — previous use of ' string ' (at line string ) conflicts with this use 原因:While looking for prior declarations of a cursor, procedure, function, or pack…
- TNS-00305 — The Navigator encountered an invalid/unknown trace level\n 原因:Message sent back by the Navigator indicating an invalid trace level. 处理:Reattempt the r…
- ORA-00306 — limit of string instances in this database 原因:Starting this instance would exceed the maximum number of instances allowed for this database. This mess…
- PLS-00306 — wrong number or types of arguments in call to ' string ' 原因:This error occurs when the named subprogram call cannot be matched to any declaration for …
- TNS-00306 — Connection Manager encountered an invalid/unknown trace level\n 原因:Message sent back by the Connection Manager indicating an invalid trace level. 处理:R…
- ORA-00307 — requested INSTANCE_NUMBER out of range, maximum is string 原因:The initialization parameter INSTANCE_NUMBER specified a number that was out of range. 处理…
- PLS-00307 — too many declarations of ' string ' match this call 原因:The declaration of a subprogram or cursor name is ambiguous because there was no exact match be…
- TNS-00307 — Navigator: Reread parameter data 原因:Request sent by the Navigator to control program indicating that parameter data was read. 处理:None
- ORA-00308 — cannot open archived log ' string ' 原因:The system cannot access a required archived redo log file. 处理:Check that the off line log exists, the storage …
- PLS-00308 — this construct is not allowed as the origin of an assignment 原因:The construct or expression does not designate a value that can be assigned to a varia…
- TNS-00308 — Navigator: Failed to open log while rereading parameter data 原因:Request sent by the Navigator to control program indicating that it could not reopen l…
- ORA-00309 — log belongs to wrong database 原因:The system cannot access the archived redo log because it belongs to another database. 处理:Specify the correct redo lo…
- PLS-00309 — with %%LAST attribute, ' string ' must be a variable of an enumerated type 原因:The "%LAST" attribute must be applied to an identifier that has been dec…
- TNS-00309 — Connection Manager: Failed to open log while re-reading parameter data 原因:Request sent by the Connection Manager to control program indicating that it…
- ORA-00310 — archived log contains sequence string ; sequence string required 原因:The archived log was out of sequence, probably because it was corrupt or the wrong…
- PLS-00310 — with %%ROWTYPE attribute, ' string ' must name a table, cursor or cursor-variable 原因:The %ROWTYPE attribute must be applied to an identifier declared …
- TNS-00310 — Navigator: Failed to start tracing after rereading parameter data 原因:Message sent back to control program from Navigator. 处理:None
- ORA-00311 — cannot read header from archived log 原因:An I/O error occurred when attempting to read the log file header from the specified archived redo log file. 处…
- PLS-00311 — the declaration of " string " is incomplete or malformed 原因:This occurrence of the identifier cannot be compiled because its type has not been properl…
- TNS-00311 — Connection Manager: Failed to start tracing after rereading parameter data 原因:Message sent back to control program from Connection Manager. 处理:None
- ORA-00312 — online log string thread string : ' string ' 原因:This message reports the filename for details of another message. 处理:Other messages will accompany thi…
- PLS-00312 — a positional parameter association may not follow a named association 原因:When a list of parameters is passed to a subprogram or cursor, if both positi…
- TNS-00312 — Connection Manager: Failed to get version information 原因:Message sent back to control program from Connection Manager. 处理:None
- ORA-00313 — open failed for members of log group string of thread string 原因:The online log cannot be opened. May not be able to find file. 处理:See accompanying err…
- PLS-00313 — ' string ' not declared in this scope 原因:There is no declaration for the given identifier within the scope of reference. The identifier might be missp…
- TNS-00313 — Navigator: Failed to get version information 原因:Message sent back to control program from Connection Manager. 处理:None
- ORA-00314 — log string of thread string , expected sequence# string doesn't match string 原因:The online log is corrupted or is an old version. 处理:Find and install …
- PLS-00314 — TABLE declarations are not allowed as PL/SQL local variables 原因:In a precompiled program, the DECLARE TABLE statement was mistakenly used inside an em…
- TNS-00314 — Protocol Adapter Errors: number , number \n 原因:Protocol Adapter errors which go with message 233 处理:None
- ORA-00315 — log string of thread string , wrong thread # string in header 原因:The online log is corrupted or is an old version. 处理:Find and install correct version…
- PLS-00315 — Implementation restriction: unsupported table index type 原因:In the INDEX BY clause of a PL/SQL table declaration, a datatype other than BINARY_INTEGER…
- TNS-00315 — Failed to allocate larger connect data area for getting pump data: number \n 原因:Could not allocate a large enough area to get pump statistics; continu…
- ORA-00316 — log string of thread string , type string in header is not log file 原因:The online log is corrupted or is an old version. 处理:Find and install correct v…
- PLS-00316 — PL/SQL TABLEs must use a single index 原因:In the INDEX BY clause of a PL/SQL table declaration, a composite primary key was specified. PL/SQL tables mu…
- TNS-00316 — Ran out of data buffers in the pump\n 原因:The Interchange is resource limited by having too few data buffers in the pump. 处理:If the problem persists (t…
- ORA-00317 — file type string in header is not log file 原因:This is not an archived log file. 处理:Find the correct file and try again.
- PLS-00317 — incomplete type " string " was not completed in its declarative region 原因:An incomplete type declaration was not completed in the declarative region w…
- TNS-00317 — Failed to contact Connection Manager 原因:Connection Manager is not running. 处理:Start the Connection Manager and retry
- ORA-00318 — log string of thread string , expected file size string doesn't match string 原因:On header read the file size indicated in the control file did not mat…
- PLS-00318 — type " string " is malformed because it is a non-REF mutually recursive type 原因:A type-declaration such as: -- a non-REF recursive type, for example: …
- ORA-00319 — log string of thread string has incorrect log reset status 原因:Check of log file header at database open found that an online log has log reset data th…
- PLS-00319 — subquery in an IN or NOT IN clause must contain exactly one column 原因:An invalid expression such as X IN (SELECT A,B ...) was used. When a [NOT]IN cla…
- ORA-00320 — cannot read file header from log string of thread string 原因:The file is not available. 处理:Restore the log file.
- PLS-00320 — the declaration of the type of this expression is incomplete or malformed 原因:In a declaration, the name of a variable or cursor is misspelled or the d…
- ORA-00321 — log string of thread string , cannot update log file header 原因:Cannot write to the log file. 处理:Restore the access to the file.
- PLS-00321 — expression ' string ' is inappropriate as the left hand side of an assignment statement 原因:The expression does not designate a variable that can have …
- ORA-00322 — log string of thread string is not current copy 原因:Check of log file header at database open found that an online log appears to be an incorrectly res…
- PLS-00322 — declaration of a constant ' string ' must contain an initialization assignment 原因:A constant declaration lacks the assignment of an initial value. For…
- ORA-00323 — Current log of thread string not useable and all others need archiving 原因:Attempt to open thread failed because it is necessary to switch redo generat…
- PLS-00323 — subprogram or cursor ' string ' is declared in a package specification and must be defined in the package body 原因:A subprogram specification was place…
- ORA-00324 — log file ' string ' translated name ' string ' too long, string characters exceeds string limit 原因:the translated name for a log file is too long. 处理:…
- PLS-00324 — cursor attribute may not be applied to non-cursor ' string ' 原因:This error occurs when a cursor-attribute ("%FOUND", "%NOTFOUND", "%ROWS", "%IS_OPEN",…
- ORA-00325 — archived log for thread string , wrong thread # string in header 原因:The archived log is corrupted or for another thread. Can not use the log for apply…
- PLS-00325 — non-integral numeric literal string is inappropriate in this context 原因:A non-integral numeric literal was used in a context that requires an integer …
- ORA-00326 — log begins at change string , need earlier change string 原因:The archived log supplied for recovery was generated after the log that is needed. Can not…
- PLS-00326 — IN clause must contain same number of expressions as subquery 原因:The number of expressions in an IN clause did not equal the number of expressions in …
- ORA-00327 — log string of thread string , physical size string less than needed string 原因:A log file has shrunk in size. This is likely to have been caused by ope…
- PLS-00327 — " string " is not in SQL scope here 原因:In a SQL statement, a reference was made to an out-of-scope database object. The referenced object might be mis…
- ORA-00328 — archived log ends at change string , need later change string 原因:The archived log supplied for recovery was generated before the log that is needed. C…
- PLS-00328 — A subprogram body must be defined for the forward declaration of string . 原因:A subprogram specification was declared, but the corresponding subprogram…
- ORA-00329 — archived log begins at change string , need change string 原因:The archived log is not the correct log. An earlier log is needed. 处理:Restore the correct…
- PLS-00329 — schema-level type has illegal reference to string 原因:An attempt was made to make a reference from a schema-level type to something other than a schema…
- ORA-00330 — archived log ends at change string , need change string 原因:The archived log is not the correct log. A later log is needed. 处理:Restore the correct log …
- PLS-00330 — invalid use of type name or subtype name 原因:A datatype or subtype specifier was mistakenly used in place of a constant, variable, or expression. For e…
- ORA-00331 — log version string incompatible with ORACLE version string 原因:The log was written by incompatible version of Oracle. 处理:Recover the database with the …
- PLS-00331 — illegal reference to string 原因:You had an EITHER 1. an illegal reference to some object in user SYS. to use one of them in an illegal way OR 2. an ill…
- ORA-00332 — archived log is too small - may be incompletely archived 原因:The log is smaller than the space allocated in it. May be the result of a shutdown abort w…
- PLS-00332 — " string " is not a valid prefix for a qualified name 原因:You have a malformed qualified name because the prefix is not valid. 处理:Remove or change the …
- ORA-00333 — redo log read error block string count string 原因:An IO error occurred while reading the log described in the accompanying error. 处理:Restore accessibil…
- PLS-00333 — " string " must match an object-table alias in this context 原因:The name, appearing in the context of a REF or VALUE, did not resolve to an object-tabl…
- ORA-00334 — archived log: ' string ' 原因:Reporting filename for details of another error 处理:See associated error messages
- PLS-00334 — " string " matches table or view without an alias 原因:You have a reference to a table or view name without an alias. 处理:Replace the reference with a re…
- ORA-00335 — online log string : No log with this number, log does not exist 原因:Reporting filename for details of another error 处理:See associated error messages
- PLS-00335 — a package name conflicts with an existing object 原因:In a CREATE PACKAGE statement, a package (which is a database object that groups logically related…
- ORA-00336 — log file size string blocks is less than minimum string blocks 原因:The log file size as specified in create database is too small. 处理:Increase the log …
- PLS-00336 — non-object-table " string " illegal in this context 原因:You have a REF or VALUE modifier for a non-object-table 处理:Replace the reference with a referen…
- ORA-00337 — log file ' string ' does not exist and no size specified 原因:An attempt to add a log found neither an existing file nor a size for creating the file. 处…
- PLS-00337 — " string " matches too many object table aliases 原因:You have an ambiguous reference to an object-table alias; there are at least two object-table alia…
- ORA-00338 — log string of thread string is more recent than control file 原因:The control file change sequence number in the log file is greater than the number in …
- PLS-00338 — unable to resolve " string " as a column or row expression 原因:You have a reference to a name that could not be resolved as a column or row expression.…
- ORA-00339 — archived log does not contain any redo 原因:The archived log is not the correct log. It is a copy of a log file that has never been used for redo genera…
- PLS-00339 — " string " matches object-table without a REF or VALUE modifier 原因:You have an object-table name appearing without a REF or VALUE modifier. 处理:If you …
- ORA-00340 — IO error processing online log string of thread string 原因:An IO error occurred on the named online log. 处理:Restore accessibility to file, or restore f…
- ORA-00341 — log string of thread string , wrong log # string in header 原因:The internal information in an online log file does not match the control file. 处理:Resto…
- PLS-00341 — declaration of cursor ' string ' is incomplete or malformed 原因:A cursor declaration is improper or an identifier referenced in the cursor declaration …
- ORA-00342 — archived log does not have expected resetlogs SCN string 原因:Recovery was given a log that does not belong to current incarnation or one of the parent …
- ORA-00344 — unable to re-create online log ' string ' 原因:An I/O failure occurred when attempting to re-create an online as part of either ALTER DATABASE OPEN RESE…
- ORA-00345 — redo log write error block string count string 原因:An IO error has occurred while writing the log 处理:Correct the cause of the error, and then restart t…
- ORA-00346 — log member marked as STALE and closed 原因:A log file member was no longer complete. 处理:Correct the underlying problem by referring to the other error m…
- ORA-00347 — log string of thread string , expected block size string doesn't match string 原因:On header read the blocksize indicated in the control file did not ma…
- ORA-00348 — single-process redo failure. Must abort instance 原因:A failure occurred during a critical portion of the log code during single process operation. This…
- ORA-00349 — failure obtaining block size for ' string ' 原因:The operating system was unable to determine the blocksize for the given filename. 处理:Consult the accom…
- ORA-00350 — log string of instance string (thread string ) needs to be archived 原因:The command cannot be done because the log has not been archived, and media rec…
- ORA-00351 — recover-to time invalid 原因:The time specified in a recover-until statement must be after January 1st 1988. 处理:Specify a time after January 1st 1988.
- PLS-00351 — Not logged onto database ' string ' 原因:An attempt was made to access an Oracle database without being logged on. Probably, an invalid username or pass…
- ORA-00352 — all logs for thread string need to be archived - cannot enable 原因:Attempting to enable a thread with all logs needing to be archived, and media recove…
- PLS-00352 — Unable to access another database ' string ' 原因:An attempt was made to reference an object in a database other than the current local or remote Oracle…
- ORA-00353 — log corruption near block string change string time string 原因:Some type of redo log corruption has been discovered. This error describes the location …
- PLS-00353 — ' string ' must name a user in the database 原因:This error occurs when the username was misspelled or when the user does not exist in the database. 处理:…
- ORA-00354 — corrupt redo log block header 原因:The block header on the redo block indicated by the accompanying error, is not reasonable. 处理:Do recovery with a good…
- PLS-00354 — username must be a simple identifier 原因:A qualified username such as scott.accts is not permitted in this context. 处理:Specify a simple username such a…
- ORA-00355 — change numbers out of order 原因:A change number found in the redo log is lower than a previously encountered change number. The log is corrupted in som…
- PLS-00355 — use of pl/sql table not allowed in this context 原因:A PL/SQL table was referenced in the wrong context (for example, with a remote link). 处理:Remove the…
- ORA-00356 — inconsistent lengths in change description 原因:A change record in the redo log contains lengths that do not add up to a consistent value. The log is co…
- PLS-00356 — ' string ' must name a table to which the user has access 原因:The named table is not accessible to the user. This error occurs when the table name or u…
- ORA-00357 — too many members specified for log file, the maximum is string 原因:An add logfile or add logfile member command would result in a log with too many mem…
- PLS-00357 — Table,View Or Sequence reference ' string ' not allowed in this context 原因:A reference to database table, view, or sequence was found in an inappropri…
- ORA-00358 — Too many file members specified, the maximum is string 原因:A create or alter statement specified too many members in a parenthesised file list. 处理:Spec…
- PLS-00358 — column ' string ' exists in more than one table; use qualifier 原因:The statement is ambiguous because it specifies two or more tables having the same c…
- ORA-00359 — logfile group string does not exist 原因:An add logfile member or drop logfile request specified a logfile group number that does not exist. 处理:Check th…
- PLS-00359 — assignment target in ' string ' must have components 原因:An assignment target was declared that lacks the components needed to store the assigned value…
- ORA-00360 — not a logfile member: string 原因:A filename was given to drop logfile member that is not a part of the database, or which is a data file. 处理:Supply a v…
- PLS-00360 — cursor declaration without body needs return type 原因:A cursor declaration lacks either a body (SELECT statement) or a return type. If you want to sepa…
- ORA-00361 — cannot remove last log member string for group string 原因:An attempt has been made to remove the last member of a log file group. 处理:If desired, delete…
- PLS-00361 — IN cursor ' string ' cannot be OPEN'ed 原因:A cursor parameter with mode IN cannot be modified, and therefore cannot be opened. 处理:Change the cursor par…
- ORA-00362 — member is required to form a valid logfile in group string 原因:A request to drop a logfile member was denied because it would remove data required to f…
- PLS-00362 — invalid cursor return type; ' string ' must be a record type 原因:In a cursor specification or REF CURSOR type definition, a non- record type such as NU…
- ORA-00363 — log is not the archived version 原因:The log given to recovery is a backup of the online version from the time it was the current log. The archived vers…
- PLS-00363 — expression ' string ' cannot be used as an assignment target 原因:A literal, constant, IN parameter, loop counter, or function call was mistakenly used …
- ORA-00364 — cannot write header to new log member 原因:An i/o error occurred when attempting to write the header to a log member that is being added to an existing …
- PLS-00364 — loop index variable ' string ' use is invalid 原因:An attempt was made to assign the value of an OUT parameter to 处理:Use an IN OUT parameter instead of …
- ORA-00365 — the specified log is not the correct next log 原因:The specified log failed to pass checks to ensure it corresponds to the log that was just applied. Th…
- ORA-00366 — log string of thread string , checksum error in the file header 原因:The file header for the redo log contains a checksum that does not match the value …
- PLS-00366 — subtype of a NOT NULL type must also be NOT NULL 原因:After a subtype was defined as NOT NULL, it was used as the base type for another subtype defined …
- ORA-00367 — checksum error in log file header 原因:The file header for the redo log contains a checksum that does not match the value calculated from the file heade…
- PLS-00367 — a RAISE statement with no exception name must be inside an exception handler 原因:A RAISE statement not followed by an exception name was found outside …
- ORA-00368 — checksum error in redo log block 原因:The redo block indicated by the accompanying error, is not vaild. It has a checksum that does not match the block …
- PLS-00368 — in RAISE statement, ' string ' must be an exception name 原因:The identifier in a RAISE statement is not a valid exception name. 处理:Make sure the identi…
- ORA-00369 — Current log of thread string not useable and other log being cleared 原因:Attempt to open thread failed because it is necessary to switch redo generatio…
- PLS-00369 — no choices may appear with choice OTHERS in an exception handler 原因:A construct of the form WHEN excep1 OR OTHERS => was encountered in the definition…
- ORA-00370 — potential deadlock during kcbchange operation 原因:Error code used internally by software. Should never be reported 处理:Treat as internal error. See erro…
- PLS-00370 — OTHERS handler must be last among the exception handlers of a block 原因:One or more exception handlers appear after an OTHERS handler. However, the OTH…
- ORA-00371 — not enough shared pool memory, should be at least string bytes 原因:The SHARED_POOL_SIZE initialization parameter was too small. 处理:Increase the paramet…
- PLS-00371 — at most one declaration for ' string ' is permitted 原因:A reference to an identifier was ambiguous because there were multiple declarations for the ide…
- ORA-00372 — file string cannot be modified at this time 原因:attempting to modify the contents of a file that cannot be modified. The file is most likely part of a …
- PLS-00372 — In a procedure, RETURN statement cannot contain an expression 原因:In a procedure, a RETURN statement contains an expression, which is not allowed. In f…
- ORA-00373 — online log version string incompatible with ORACLE version string 原因:The online log was written by incompatible version of Oracle. Can occur when the …
- PLS-00373 — EXIT/CONTINUE label ' string ' must label a LOOP statement 原因:The label in the EXIT or CONTINUE statement did not refer to a LOOP statement. An EXIT o…
- ORA-00374 — parameter db_block_size = string invalid; must be power of 2 in the range [ string .. string ] 原因:invalid value for db_block_size parameter 处理:adjust …
- PLS-00374 — illegal EXIT/CONTINUE statement; must appear inside the loop labeled ' string ' 原因:The label in the EXIT or CONTINUE statement did not refer to a loop…
- PLS-00375 — illegal GOTO statement; this GOTO cannot branch to label ' string ' 原因:The line and column numbers accompanying the error message refer to a GOTO that…
- ORA-00376 — file string cannot be read at this time 原因:attempting to read from a file that is not readable. Most likely the file is offline. 处理:Check the state of…
- PLS-00376 — illegal EXIT/CONTINUE statement; it must appear inside a loop 原因:An EXIT or CONTINUE statement was found outside of a loop construct. The EXIT stateme…
- ORA-00377 — Frequent backups of file string causing write operation to stall 原因:Backups are occurring too frequently on this file. Each time a new backup is start…
- PLS-00377 — internal type PLS_INTEGER is not included in this release of PL/SQL 原因:The type-name INTEGER was used in a declaration. 处理:n/a
- ORA-00378 — buffer pools cannot be created as specified 原因:Either the number of buffers or the number of lru latches is too small to satisfy the specified buffer …
- PLS-00378 — invalid compilation unit for this release of PL/SQL 原因:A compilation unit is a file containing PL/SQL source code that is passed to the compiler. Only…
- ORA-00379 — no free buffers available in buffer pool string for block size string K 原因:All buffers in the specified buffer pool for the specified block size are i…
- PLS-00379 — CASE statements are not included in this release of PL/SQL 原因:The unit being compiled contains a CASE statement. However, the current release of PL/SQ…
- ORA-00380 — cannot specify db_ string k_cache_size since string K is the standard block size 原因:User specified the parameter db_nk_cache_size (where n is one of 2…
- PLS-00380 — functions and procedures are not included in this release of PL/SQL 原因:The program being compiled contains a declaration of a FUNCTION or PROCEDURE. 处…
- ORA-00381 — cannot use both new and old parameters for buffer cache size specification 原因:User specified one or more of { db_cache_size , db_recycle_cache_size, d…
- PLS-00381 — type mismatch found at ' string ' between column and variable in subquery or INSERT 原因:The datatypes of a column and a variable do not match. The vari…
- ORA-00382 — string not a valid block size, valid range [ string .. string ] 原因:User specified a value for db_nk_cache_size where n is one of {2, 4, 8, 16, 32}, bu…
- PLS-00382 — expression is of wrong type 原因:An expression has the wrong datatype for the context in which it was found. 处理:Change the datatype of the expression. Y…
- ORA-00383 — DEFAULT cache for blocksize string cannot be reduced to zero 原因:User attempted to reduce db_cache_size to zero, or attempted to to reduce db_ n K_cach…
- PLS-00383 — type mismatch found at ' string ' inside an IN or NOT IN clause 原因:In a test for set membership such as X NOT IN (SELECT Y ... ), the expressions X an…
- ORA-00384 — Insufficient memory to grow cache 原因:The system could not allocate sufficient memory to grow the cache to the specified size. 处理:Attempt a smaller inc…
- PLS-00384 — type mismatch found at ' string ' in UPDATE's SET clause 原因:The column to the left of the equal sign in the SET clause of an UPDATE statement does not…
- PLS-00385 — type mismatch found at ' string ' in SELECT...INTO statement 原因:The expressions to the left and right of the INTO clause in a SELECT...INTO statement …
- PLS-00386 — type mismatch found at ' string ' between FETCH cursor and INTO variables 原因:An assignment target in the INTO list of a FETCH statement does not match…
- PLS-00387 — INTO variable cannot be a database object 原因:An item in the INTO list of a FETCH or SELECT statement was found to be a database object. INTO introduce…
- ORA-00388 — dependent redo for buffers is lost 原因:The instance contained buffers that had non-durable changes and depended on redo in another thread that was lost…
- PLS-00388 — undefined column ' string ' in subquery 原因:A subquery contains a column name that was not defined in the specified table. 处理:Change the expression to …
- PLS-00389 — table, view or alias name " string " not allowed in this context 原因:A table, view or alias name name corresponding to a regular (non-object) table app…
- ORA-00390 — log string of thread string is being cleared, cannot become current log 原因:An attempt to switch to a new online log for the redo thread failed because…
- PLS-00390 — undefined column ' string ' in INSERT statement 原因:Check the spelling of the column name, then change the expression so that it refers only to defined…
- ORA-00391 — All threads must switch to new log format at the same time 原因:An attempt to switch the current log of a single thread is not allowed because the compa…
- PLS-00391 — undefined column ' string ' in UPDATE statement 原因:An UPDATE statement refers to a column not defined for the table or view being updated. 处理:Check th…
- ORA-00392 — log string of thread string is being cleared, operation not allowed 原因:An operation encountered this online log in the middle of being cleared. The co…
- PLS-00392 — Type mismatch in arguments to BETWEEN 原因:In a comparison such as X BETWEEN Y AND Z, the expressions X, Y, and Z do not match in datatype, and it is un…
- ORA-00393 — log string of thread string is needed for recovery of offline datafiles 原因:Log cannot be cleared because the redo in it is needed to recover offline d…
- PLS-00393 — wrong number of columns in SELECT...INTO statement 原因:The number of columns selected by a SELECT...INTO statement does not match the number of variabl…
- ORA-00394 — online log reused while attempting to archive it 原因:It has been detected that an online log that is being archived has been reused 处理:Cannot archive t…
- PLS-00394 — wrong number of values in the INTO list of a FETCH statement 原因:The number of variables in the INTO clause of a FETCH statement does not match the num…
- ORA-00395 — online logs for the clone database must be renamed 原因:A clone database open forces logfile renaming to avoid overwriting the primary logfiles 处理:Renam…
- PLS-00395 — wrong number of values in VALUES clause of INSERT statement 原因:The number of columns in an INSERT statement does not match the number of values in the…
- ORA-00396 — error string required fallback to single-pass recovery 原因:The indicated error caused two-pass instance or crash recovery to fail. Recovery was retried…
- PLS-00396 — INSERT statement's subquery yields wrong number of columns 原因:The number of columns in an INSERT statement does not match the number of columns in a s…
- ORA-00397 — instance recovery process terminated with error 原因:The foreground process doing instance recovery died. 处理:Check the foreground trace file for the cau…
- PLS-00397 — Type mismatch in arguments to IN 原因:In a test for set membership such as X IN (Y, Z), the expressions X, Y, and Z do not match in datatype, and it is …
- ORA-00398 — abort thread recovery due to reconfiguration 原因:Global enqueue service reconfiguration occurred during instance/crash recovery. 处理:This is used intern…
- PLS-00398 — wrong number of columns in UNION, INTERSECT, or MINUS expression 原因:The SELECT clauses to the left and right of a UNION, INTERSECT, or MINUS expressio…
- ORA-00399 — corrupt change description in redo log 原因:A change vector in the redo log failed validation checks. 处理:Do recovery with a good version of the log or d…
- PLS-00399 — different types of columns in UNION, INTERSECT, or MINUS expression 原因:The select lists to the left and right of a UNION, INTERSECT, or MINUS expressi…
- ORA-00400 — invalid release value string for parameter string 原因:The release level given for the specified init parameter is invalid. 处理:Correct the parameter val…
- PLS-00400 — different number of columns between cursor SELECT statement and return value 原因:In a cursor declaration, a return type (such as RETURN emp%ROWTYPE) wa…
- ORA-00401 — the value for parameter string is not supported by this release 原因:The value specified cannot be supported by this release of the software. 处理:Choose …
- PLS-00401 — different column types between cursor SELECT statement and return value found at ' string ' 原因:In a cursor declaration, a return type (such as RETURN …
- ORA-00402 — database changes by release string cannot be used by release string 原因:Changes have been made to the database that require a newer software release or…
- PLS-00402 — alias required in SELECT list of cursor to avoid duplicate column names 原因:A cursor was declared with a SELECT statement that contains duplicate colum…
- ORA-00403 — string ( string ) is not the same as other instances ( string ) 原因:Another instance has set the compatible or compatible no recovery parameters differ…
- PLS-00403 — expression ' string ' cannot be used as an INTO-target of a SELECT/FETCH statement 原因:A FETCH statement was unable to assign a value to an assignment …
- ORA-00404 — Convert file not found: ' string ' 原因:The file used for converting the database from V7 to V8 could not be found. 处理:Verify that the migration process…
- PLS-00404 — cursor ' string ' must be declared with FOR UPDATE to use with CURRENT OF 原因:The use of the CURRENT OF cursor_name clause is legal only if cursor_name…
- ORA-00405 — compatibility type " string " 原因:Reporting a type associated with another error. 处理:See accompanying error
- PLS-00405 — subquery not allowed in this context 原因:A subquery was used in an inappropriate context, such as: if (SELECT deptno FROM emp WHERE ... ) = 20 then ...…
- ORA-00406 — COMPATIBLE parameter needs to be string or greater 原因:The COMPATIBLE initialization parameter is not high enough to allow the operation. Allowing the …
- PLS-00406 — length of SELECT list in subquery must match number of assignment targets 原因:A query select list is not the same length as the list of targets that wi…
- ORA-00407 — rolling upgrade from release string . string to string . string is not allowed 原因:Another instance executing software at a different point release alr…
- PLS-00407 — '*' not allowed here; a list of columns is required 原因:An asterisk (*) was used as an abbreviation for a list of column names. However, in this contex…
- ORA-00408 — parameter string is set to TRUE 原因:Reporting the parameter that resulted in the compatibility error. 处理:Shutdown and startup with a higher compatibili…
- PLS-00408 — duplicate column ' string ' not permitted in INSERT or UPDATE 原因:An UPDATE or INSERT statement has a column list that contains duplicate column names.…
- ORA-00409 — COMPATIBLE needs to be string or higher to use AUTO SEGMENT SPACE MANAGEMENT 原因:This is due to migrating from an older release of Oracle with tablespa…
- PLS-00409 — duplicate variable ' string ' in INTO list is not permitted 原因:The same variable appears twice in the INTO list of a SELECT or FETCH statement. 处理:Rem…
- PLS-00410 — duplicate fields in RECORD,TABLE or argument list are not permitted 原因:When a user-defined record was declared, the same name was given to two fields.…
- PLS-00411 — Number of values in aggregate and in subquery don't match 原因:In a statement of the form aggregate = subquery, the numbers of values in the aggregate a…
- PLS-00412 — list of values not allowed as argument to this function or procedure 原因:A parenthesized list of values separated by commas (that is, an aggregate) was…
- PLS-00413 — identifier in CURRENT OF clause is not a cursor name 原因:The identifier in a CURRENT OF clause names an object other than a cursor. 处理:Check the spelli…
- PLS-00414 — no column ' string ' in table 原因:A table name or alias was used to qualify a column reference, but the column was not found in that table. Either the …
- PLS-00415 — ' string ' is an OUT parameter and cannot appear in a function 原因:An OUT or IN OUT formal parameter was used in a function specification. 处理:n/a
- PLS-00416 — The third argument of DECODE cannot be NULL 原因:The third argument of DECODE is NULL. 处理:Enter an argument with a proper type and value.
- PLS-00417 — unable to resolve " string " as a column 原因:A database table, view, or column was specified in a SQL statement that does not exist, or the privileges …
- PLS-00418 — array bind type must match PL/SQL table row type 原因:A host array was passed (by an Oracle Precompiler program, for example) to a PL/SQL subprogram for…
- PLS-00419 — reference to remote attribute not permitted 原因:An attempt was made to reference a remote cursor attribute, which is not allowed. For example, the code…
- PLS-00420 — can't call builtin routines remotely 原因:An attempt was made to call a built-in PL/SQL function remotely, which is not allowed. For example, the code m…
- ORA-00421 — failure in creating the required number of sessions for string processes 原因:The required number of sessions for the PROCESSES parameter was greater th…
- PLS-00421 — circular synonym ' string ' 原因:Directly or indirectly, a synonym was defined in terms of itself, creating a circular definition. 处理:Redefine the synon…
- PLS-00422 — no PL/SQL translation for the bindtype given for this bind variable 原因:A host variable was passed (by an Oracle Precompiler program, for example) to P…
- PLS-00423 — ORDER BY item must be the number of a SELECT-list expression 原因:A column alias was used in the ORDER BY clause of a SELECT statement that uses a UNION…
- PLS-00424 — RPC defaults cannot include Package State 原因:An attempt was made to call a remote subprogram whose defaulted parameters depend on package state, which…
- PLS-00425 — in SQL, function argument and return types must be SQL type 原因:When a cursor variable was declared as the formal parameter of a 处理:Change the paramete…
- PLS-00427 — RPC defaults cannot use builtins when versions of STANDARD differ 原因:An attempt was made to call a remote subprogram whose defaulted parameter value i…
- PLS-00428 — an INTO clause is expected in this SELECT statement 原因:The INTO clause of a SELECT INTO statement was omitted. For example, the code might look like S…
- PLS-00429 — unsupported feature with RETURNING clause 原因:- INTO clause and RETURNING clause cannot be use in the same statement - RETURNING clause is currently no…
- PLS-00430 — FORALL iteration variable string is not allowed in this context 原因:FORALL iteration variable can only be used as a subscript. It cannot be used direct…
- PLS-00431 — bulk SQL attributes must use a single index 原因:More than one index specified to access SQL bulk attribute. 处理:Use a single index of integer datatype.
- PLS-00432 — implementation restriction: cannot use FORALL and BULK COLLECT INTO together in SELECT statements 原因:SELECT statement contains both the FORALL and BUL…
- PLS-00433 — inconsistent package STANDARD 原因:PL/SQL compiler could not find the entries (such as type declarations) that should exist in the package STANDARD. 处理:…
- PLS-00434 — record field has unsupported type: " string " 原因:An attempt was made to use an unsupported type for a record field. In this release, the use of the SQ…
- PLS-00435 — DML statement without BULK In-BIND cannot be used inside FORALL 原因:The DML (SELECT/INSERT/DELETE/UPDATE) statement inside the FORALL statement does no…
- ORA-00436 — ORACLE is not licensed. Contact Oracle Corp. for assistance 原因:The installed Oracle software was not licensed to run on this CPU. This occurred if the…
- PLS-00436 — implementation restriction: cannot reference fields of BULK In-BIND table of records or objects 原因:table(bulk_index).field is not supported at run-tim…
- ORA-00437 — ORACLE feature is not licensed. Contact Oracle Corp. for assistance 原因:ORACLE feature is not licensed. 处理:Contact ORACLE for assistance.
- PLS-00437 — FORALL bulk index cannot be used in string clause 原因:RETURNING table(bulk_index) is not supported. 处理:Use RETURNING BULK COLLECT instead
- ORA-00438 — string Option not installed 原因:The specified option is not installed. 处理:Purchase and install the option.
- PLS-00438 — value in LIMIT clause: ' string ' use is invalid 原因:The evaluation value in the LIMIT clause of a bulk fetch was found in an inappropriate context. Fo…
- ORA-00439 — feature not enabled: string 原因:The specified feature is not enabled. 处理:Do not attempt to use this feature.
- PLS-00439 — A LIMIT clause must be used within a BULK FETCH 原因:A LIMIT clause is used within a non-bulk fetch 处理:Do not use a LIMIT clause when a non-bulk fetch i…
- PLS-00440 — FORALL bulk IN-bind variables cannot be used here 原因:A reference to a FORALL statement's bulk IN-bind variable was found in a context in which it is n…
- PLS-00441 — EXIT/CONTINUE statement may have a label here; ' string ' is not a label 原因:The specified name was not a label. An EXIT or CONTINUE statement does not…
- ORA-00442 — Oracle Database Express Edition (XE) single instance violation error 原因:An attempt was made to start more than one Oracle Database Express Edition (XE…
- PLS-00442 — CONTINUE statement may not have the prefix STANDARD 原因:The procedure CONTINUE appears in STANDARD but that procedure may not be called either with its…
- ORA-00443 — background process " string " did not start 原因:The specified process did not start. 处理:Ensure that the executable image is in the correct place with t…
- ORA-00444 — background process " string " failed while starting 原因:Usually due to a bad (or non-existent) background process image. 处理:Get a good background proce…
- ORA-00445 — background process " string " did not start after string seconds 原因:The specified process did not start after the specified time. 处理:Ensure that the b…
- ORA-00446 — background process started when not expected 原因:The background process specified started up AFTER the RDBMS was already running. 处理:If nobody at your …
- ORA-00447 — fatal error in background process 原因:One of the background processes died unexpectedly. 处理:Warm start the system.
- ORA-00448 — normal completion of background process 原因:One of the background processes completed normally (i.e. exited). The background process thinks that somebo…
- ORA-00449 — background process ' string ' unexpectedly terminated with error string 原因:A foreground process needing service from a background process has discover…
- ORA-00450 — background process ' string ' did not start 原因:The specified process did not start. 处理:Consult the error code, and the trace file for the process.
- PLS-00450 — a variable of this private type cannot be declared here 原因:A variable declaration uses a type that is declared PRIVATE in some other compilation unit.…
- ORA-00451 — foreground process died unexpectedly 原因:The foreground process for the new connection did not start. 处理:Reconnect to Oracle.
- ORA-00452 — foreground process unexpectedly terminated with error string 原因:The foreground process for the new connection did not start. 处理:Reconnect to Oracle.
- PLS-00452 — Subprogram ' string ' violates its associated pragma 原因:A packaged function cannot be called from SQL statements unless its purity level is asserted b…
- ORA-00453 — backgroud process ' string ' is dead 原因:The background process that was being messaged was dead or its incarnation was invalid. 处理:Restart the backgro…
- PLS-00453 — remote operations not permitted on object tables or user-defined type columns 原因:A reference to a remote object tables or user-defined type column was…
- ORA-00454 — The background process ' string ' is running 原因:An attempt to spawn a background process that was already running failed. 处理:None
- PLS-00454 — with a returning into clause, the table expression cannot be remote or a subquery 原因:A reference to a remote table or subquery was found in a sql stat…
- ORA-00455 — timeout waiting for background process ' string ' cleanup 原因:The state of the background process was not cleaned up. 处理:None
- PLS-00455 — cursor ' string ' cannot be used in dynamic SQL OPEN statement 原因:dynamicly OPEN a REF CURSOR that has RETURN type. However, only REF CURSOR without R…
- ORA-00456 — prespawn not enabled 原因:Prespawn was not enabled. 处理:None
- PLS-00456 — item ' string ' is not a cursor 原因:the given variable is not a cursor and therefore cannot be OPEN'ed or FETCH'ed from. 处理:check the spelling and decl…
- ORA-00457 — process pool not found 原因:The process pool was not found. 处理:Verify the process pool name.
- PLS-00457 — expressions have to be of SQL types 原因:an expression of wrong type is in USING or dynamic RETURNING clause. In USING or dynamic RETURNING clause, an e…
- ORA-00458 — process pool is already started 原因:The process pool was already started. 处理:None
- PLS-00458 — subprogram ' string ' cannot be called from a REPEATABLE subprogram 原因:The subprogram is not REPEATABLE and cannot be called from a REPEATABLE subprog…
- ORA-00459 — process pool is not started 原因:The process pool was not started. 处理:None
- PLS-00459 — this feature is not allowed in REPEATABLE subprogram 原因:Having one of the followings feature in the REPEATABLE subprogram: dynamic SQL statements or a…
- ORA-00460 — process pool invalid configuration value(s) 原因:Invalid configuration values were specified for the process pool. 处理:Verify the configuration values.
- PLS-00460 — REPEATABLE subprogram ' string ' has to be RNDS, WNDS, RNPS, and WNPS 原因:Repeatable subprogram can neither read database state (RNDS), write database …
- ORA-00461 — MGA namespace already opened. 原因:Managed Global Area(MGA) namespace was already opened. 处理:None
- PLS-00461 — mismatch REPEATABLE information between specification and body of ' string ' 原因:REPEATABLE is declared at the subprogram's specification, but not at i…
- ORA-00462 — MGA namespace shared handle not valid. 原因:Managed Global Area(MGA) namespace shared handle was not valid. 处理:None
- PLS-00462 — nested subprogram ' string ' has to be REPEATABLE 原因:the nested subprogram of a REPEATABLE subprogram is not declared as REPEATABLE. If a subprogram i…
- ORA-00463 — MGA namespace private handle not valid. 原因:Managed Global Area(MGA) namespace private handle was not valid. 处理:None
- ORA-00464 — Processes are still attached to MGA namespace. 原因:Processes were still attached to Managed Global Area(MGA) namespace. 处理:None
- ORA-00465 — Segments are still attached to MGA namespace. 原因:Segments were still attached to Managed Global Area(MGA) namespace. 处理:None
- ORA-00466 — MGA invalid segment information. 原因:Managed Global Area(MGA) segment information was not valid. 处理:None
- ORA-00467 — Already attached to MGA handle. 原因:There was already an attachement to the Managed Global Area(MGA) handle. 处理:None
- ORA-00468 — Not attached to MGA handle. 原因:There was no attachement to the Managed Global Area(MGA) handle. 处理:None
- ORA-00469 — CKPT process terminated with error 原因:The checkpoint process died 处理:Warm start instance
- ORA-00470 — LGWR process terminated with error 原因:The log writer process died 处理:Warm start instance
- ORA-00471 — DBWR process terminated with error 原因:The database writer process died 处理:Warm start instance
- ORA-00472 — PMON process terminated with error 原因:The process cleanup process died 处理:Warm start instance
- ORA-00473 — ARCH process terminated with error 原因:The archive process died 处理:Warm start instance
- ORA-00474 — SMON process terminated with error 原因:The system cleanup process died 处理:Warm start instance
- ORA-00475 — TRWR process terminated with error 原因:The system tracing process died 处理:Warm start instance
- ORA-00476 — RECO process terminated with error 原因:The distributed transaction (two-phase commit) recovery process died. 处理:Warm start instance
- ORA-00477 — SNP* process terminated with error 原因:A materialized view refresh process died 处理:PMON will restart SNP process shortly. If SNP process does not get s…
- ORA-00478 — SMON process terminated due to error string 原因:SMON was unable to service the requests due to error in cleanup of resources 处理:Warm start instance
- ORA-00479 — RVWR process terminated with error string 原因:The RVWR process died 处理:Warm start instance
- ORA-00480 — LCK* process terminated with error 原因:A system lock process died 处理:Warm start instance
- ORA-00481 — LMON process terminated with error 原因:The global enqueue service monitor process died 处理:Warm start instance
- ORA-00482 — LMD* process terminated with error 原因:A global enqueue service daemon process died 处理:Warm start instance
- ORA-00483 — During shutdown a process abnormally terminated 原因:One of the background processes did not exit normally at or near the time of shutdown. 处理:Use shutd…
- PLS-00483 — exception ' string ' may appear in at most one exception handler in this block 原因:An exception appears in two different WHEN clauses (that is, two dif…
- ORA-00484 — LMS* process terminated with error 原因:A global cache service process died 处理:Warm start instance
- PLS-00484 — redundant exceptions ' string ' and ' string ' must appear in same exception handler 原因:Using the EXCEPTION_INIT pragma, different exceptions were ini…
- ORA-00485 — DIAG process terminated with error string 原因:A global diagnostic process died 处理:Wait for process to restart
- PLS-00485 — in exception handler, ' string ' must be an exception name 原因:An identifier not declared as an exception appears in an exception handler WHEN clause. …
- ORA-00486 — ASMB process terminated with error 原因:An ASM background process died. 处理:Warm start instance. Also check that ASM Instance is running.
- PLS-00486 — select list cannot be enclosed in parentheses 原因:In a SELECT statement, the select list was enclosed in parentheses, as in: SELECT (deptno, dname, loc…
- ORA-00487 — CTWR process terminated with error 原因:The change tracking process died 处理:Warm start instance
- PLS-00487 — Invalid reference to variable ' string ' 原因:A variable was referenced in a way that is inconsistent with its datatype. For example, a scalar variable …
- ORA-00488 — RBAL process terminated with error 原因:The ASM rebalance coordinator process died. 处理:Warm start instance.
- PLS-00488 — ' string ' must be a type 原因:The datatype specifier in a declaration or expression does not designate a legal type. For example, the %TYPE attribute m…
- ORA-00489 — ARB* process terminated with error 原因:An ASM rebalance worker process died. 处理:Wait for process to restart.
- PLS-00489 — invalid table reference: ' string ' must be a column in this expression 原因:In a query, a select-list item refers to a table in the FROM clause but not…
- ORA-00490 — PSP process terminated with error 原因:The process spawner died 处理:Warm start instance
- PLS-00490 — illegal statement 原因:A constant, variable, function call, or incomplete statement was used where a statement was expected. For example, instead of cal…
- ORA-00491 — RMS0 process terminated with error 原因:The RAC Management Process died 处理:n/a
- PLS-00491 — numeric literal required 原因:A constant or variable was used where a numeric literal is required. For example, the code might look like my_ename VARCHA…
- ORA-00492 — GTX* process terminated with error 原因:A global transaction background process died. 处理:Warm start instance
- PLS-00492 — variable or constant initialization may not refer to functions declared in the same package 原因:If a package spec p declares a function f, that functio…
- ORA-00493 — GMON process terminated with error 原因:The ASM disk group monitor process died 处理:Warm start instance
- PLS-00493 — invalid reference to a server-side object or function in a local context 原因:A reference to a server-side object (e.g. a table column) or function (a g…
- ORA-00494 — enqueue string held for too long (more than string seconds) by 'inst string , osid string ' 原因:The specified process did not release the enqueue withi…
- PLS-00494 — coercion into multiple record targets not supported 原因:The INTO list of a SELECT or FETCH specified more than a single record- type target and the col…
- ORA-00495 — GEN0 process terminated with error 原因:The generic background processing process died. 处理:Warm start the instance.
- PLS-00495 — too many columns in SELECT...INTO statement after bursting record targets 原因:Type checking indicated the columns in a SELECT or FETCH were being colle…
- ORA-00496 — LMHB process terminated with error 原因:The LM heartbeat monitor process died. 处理:Warm start the instance.
- PLS-00496 — too few columns in SELECT...INTO statement after bursting record targets 原因:Type checking indicated the columns in a SELECT or FETCH were being collec…
- ORA-00497 — XDMG process terminated with error 原因:The Cell automation manager process terminated with error. 处理:PMON will restart XDMG process shortly. If XDMG pr…
- PLS-00497 — cannot mix between single row and multi-row (BULK) in INTO list 原因:- When BULK syntax (e.g. BULK COLLECT INTO) is used to retrieve data, every variabl…
- ORA-00498 — XDWK process terminated with error 原因:The Cell automation worker actions process terminated with error. 处理:PMON will restart XDWK process shortly. If …
- PLS-00498 — illegal use of a type before its declaration 原因:A variable or constant was declared to be of a type whose declaration appears later in the compilation…
- ORA-00499 — XDMG repeatedly failed to initialize terminating the instance. 原因:The Cell automation manager process repeatedly failed to initialize. 处理:Examine the …
- PLS-00499 — coercion into collection of records not supported 原因:A SELECT or FETCH may specify a column list to be coerced into a variable which is a collection o…
- ORA-00500 — Listener registration process terminated with an error. 原因:The listener registration process died. 处理:Warm start the instance.
- PLS-00500 — invalid operator binding 原因:An operator binding fucntion cannot be found in the specified scope. 处理:Provide the correct number and types of parameters…
- ORA-00501 — CLMN process terminated with error 原因:The cleanup process died. 处理:Warm start the instance.
- TNS-00501 — Cannot allocate memory 原因:Sufficient memory could not be allocated to perform the desired activity. 处理:Either free some resource for TNS or add more m…
- ORA-00502 — PMAN process terminated with error 原因:The manager process died. 处理:Warm start the instance.
- TNS-00502 — Invalid argument 原因:An internal function received an invalid parameter. 处理:Not normally visible to the user. For further details, turn on tracing and …
- ORA-00503 — CL** process terminated with error 原因:A cleanup slave died. 处理:Warm start the instance.
- PLS-00503 — RETURN value statement required for this return from function 原因:In a function body, a RETURN statement was used that contains no expression. In proce…
- TNS-00503 — Illegal ADDRESS parameters 原因:An illegal set of protocol adapter parameters was specified. 处理:Check the parameters within the ADDRESS section of the T…
- ORA-00504 — Service monitor background process terminated with error 原因:The service monitor background process died. 处理:PMON will restart the background process s…
- PLS-00504 — type string _BASE may not be used outside of package STANDARD 原因:In a declaration, the datatype NUMBER_BASE (for example) was mistakenly specified. Th…
- TNS-00504 — Operation not supported 原因:An internal function received a request to perform an operation that is not supported (on this machine). 处理:Not normally vi…
- ORA-00505 — GEN1 process terminated with error 原因:The generic background processing process 1 died. 处理:Warm start the instance.
- PLS-00505 — User Defined Types may only be defined as PLSQL Tables or Records 原因:An attempt was made to define a type other than TABLE or RECORD, but these are th…
- TNS-00505 — Operation timed out 原因:The requested operation could not be completed within the timeout period. 处理:Check the network of the failed connection for con…
- ORA-00506 — GEN2 process terminated with error 原因:The generic background processing process 2 terminated. 处理:Warm start the instance.
- PLS-00506 — User Defined Constrained Subtypes are disallowed 原因:An attempt was made to define a constrained subtype, but only unconstrained subtypes are allowed i…
- TNS-00506 — Operation would block 原因:An internal operation did not commence because to do so would block the current process and the user has requested that opera…
- PLS-00507 — a PLSQL Table may not contain a table or a record with composite fields 原因:In a TABLE type definition, a nested record type was specified as the eleme…
- TNS-00507 — Connection closed 原因:Normal "end of file" condition has been reached; partner has disconnected. 处理:None needed; this is an information message.
- PLS-00508 — The expression in a RETURN statement cannot be a type 原因:A datatype specifier was used instead of an expression in the RETURN statement of a user-defi…
- TNS-00508 — No such protocol adapter 原因:The protocol adapter requested for this connection does not exist. 处理:Install the protocol adapter or use one that is avai…
- PLS-00509 — Implementation Restriction : Pass a returned record to a temporary identifier before selecting a field 原因:Illegal syntax was used to call a parameter-…
- TNS-00509 — Buffer overflow 原因:Too much data for buffer. 处理:Reexecute with larger receive buffer or smaller send buffer.
- ORA-00510 — not a valid MGA heap index 原因:The given Managed Global Area (MGA) index was not of the heap type. 处理:None
- PLS-00510 — Float cannot have scale 原因:When a FLOAT variable was declared, its precision and scale were specified, as shown in the following example: DECLARE Sala…
- TNS-00510 — Internal limit restriction exceeded 原因:Too many files or sockets open simultaneously (or some other resource has been depleted). 处理:For further detail…
- ORA-00511 — Cluster flash cache background process terminated with error 原因:The cluster flash cache process died. 处理:Warm start the instance.
- PLS-00511 — a record may not contain a PL/SQL table of records 原因:n a RECORD definition, one of the fields was declared as a PL/SQL table of records. This is not …
- TNS-00511 — No listener 原因:The connect request could not be completed because no application is listening on the address specified, or the application is unable t…
- ORA-00512 — attempted to kill an operating system process that has multiple threads 原因:A kill request was attempted on an operating system process that had multip…
- PLS-00512 — Implementation Restriction: ' string ': Cannot directly access remote package variable or cursor 原因:An attempt was made to reference a remote packaged…
- TNS-00512 — Address already in use 原因:Specified listener address is already being used. 处理:Start your listener with an unused address.
- PLS-00513 — PL/SQL function called from SQL must return value of legal SQL type 原因:In a SQL statement, do not call a PL/SQL function having a return type that can…
- TNS-00513 — Destination host unreachable 原因:Contact cannot be made with remote party. 处理:Make sure the network driver is functioning and the network is up.
- PLS-00514 — INSERT statement with REF INTO clause requires a typed table 原因:This INSERT statement provides REF INTO clause, which is only legal when the table spe…
- TNS-00514 — Contexts have different wait/test functions 原因:Two protocol adapters have conflicting wait/test functions. 处理:Not normally visible to the user. For fu…
- PLS-00515 — The type of the REF INTO variable ' string ' must be REF to the table's type 原因:In INSERT statement with REF INTO clause, the type of the data item mu…
- TNS-00515 — Connect failed because target host or object does not exist 原因:The address specified is not valid, or the program being connected to does not exist. 处…
- PLS-00516 — Type mismatch between object table and value ' string ' in INSERT statement. 原因:In the INSERT statement operating on typed tables (tables of objects),…
- TNS-00516 — Permission denied 原因:User has insufficient privileges to perform the requested operation. 处理:Acquire necessary privileges and try again.
- PLS-00517 — Type mismatch between a select list element ' string ' and corresponding table column in INSERT statement with a subquery 原因:In an INSERT statement wi…
- TNS-00517 — Lost contact 原因:Partner has unexpectedly gone away. 处理:Investigate partner application for abnormal termination.