错误码目录 / MySQL
MySQL 错误码目录 · 第 1 / 6 页
本页收录 MySQL 的 5,744 条错误码知识条目,每条均可打开独立详情页,包含错误说明、编号信息、官方文档与公开资料。
- 1 · EE_CANTCREATEFILE — Can't create/write to file '%s' (OS errno %d - %s)
- 2 · EE_READ — Error reading file '%s' (OS errno %d - %s)
- 3 · EE_WRITE — Error writing file '%s' (OS errno %d - %s)
- 4 · EE_BADCLOSE — Error on close of '%s' (OS errno %d - %s)
- 5 · EE_OUTOFMEMORY — Out of memory (Needed %u bytes)
- 6 · EE_DELETE — Error on delete of '%s' (OS errno %d - %s)
- 7 · EE_LINK — Error on rename of '%s' to '%s' (OS errno %d - %s)
- 9 · EE_EOFERR — Unexpected EOF found when reading file '%s' (OS errno %d - %s)
- 10 · EE_CANTLOCK — Can't lock file (OS errno %d - %s)
- 11 · EE_CANTUNLOCK — Can't unlock file (OS errno %d - %s)
- 12 · EE_DIR — Can't read dir of '%s' (OS errno %d - %s)
- 13 · EE_STAT — Can't get stat of '%s' (OS errno %d - %s)
- 14 · EE_CANT_CHSIZE — Can't change size of file (OS errno %d - %s)
- 15 · EE_CANT_OPEN_STREAM — Can't open stream from handle (OS errno %d - %s)
- 16 · EE_GETWD — Can't get working directory (OS errno %d - %s)
- 17 · EE_SETWD — Can't change dir to '%s' (OS errno %d - %s)
- 18 · EE_LINK_WARNING — Warning: '%s' had %d links
- 19 · EE_OPEN_WARNING — Warning: %d files and %d streams are left open
- 20 · EE_DISK_FULL — Disk is full writing '%s' (OS errno %d - %s). Waiting for someone to free space...
- 21 · EE_CANT_MKDIR — Can't create directory '%s' (OS errno %d - %s)
- 22 · EE_UNKNOWN_CHARSET — Character set '%s' is not a compiled character set and is not specified in the '%s' file
- 23 · EE_OUT_OF_FILERESOURCES — Out of resources when opening file '%s' (OS errno %d - %s)
- 24 · EE_CANT_READLINK — Can't read value for symlink '%s' (Error %d - %s)
- 25 · EE_CANT_SYMLINK — Can't create symlink '%s' pointing at '%s' (Error %d - %s)
- 26 · EE_REALPATH — Error on realpath() on '%s' (Error %d - %s)
- 27 · EE_SYNC — Can't sync file '%s' to disk (OS errno %d - %s)
- 28 · EE_UNKNOWN_COLLATION — Collation '%s' is not a compiled collation and is not specified in the '%s' file
- 29 · EE_FILENOTFOUND — File '%s' not found (OS errno %d - %s)
- 30 · EE_FILE_NOT_CLOSED — File '%s' (fileno: %d) was not closed
- 31 · EE_CHANGE_OWNERSHIP — Cannot change ownership of the file '%s' (OS errno %d - %s)
- 32 · EE_CHANGE_PERMISSIONS — Cannot change permissions of the file '%s' (OS errno %d - %s)
- 33 · EE_CANT_SEEK — Cannot seek in file '%s' (OS errno %d - %s)
- 34 · EE_CAPACITY_EXCEEDED — Memory capacity exceeded (capacity %llu bytes)
- 35 · EE_DISK_FULL_WITH_RETRY_MSG — Disk is full writing '%s' (OS errno %d - %s). Waiting for someone to free space... Retry in %d secs. Message reprinted in %d secs.
- 36 · EE_FAILED_TO_CREATE_TIMER — Failed to create timer (OS errno %d).
- 37 · EE_FAILED_TO_DELETE_TIMER — Failed to delete timer (OS errno %d).
- 38 · EE_FAILED_TO_CREATE_TIMER_QUEUE — Failed to create timer queue (OS errno %d).
- 39 · EE_FAILED_TO_START_TIMER_NOTIFY_THREAD — Failed to start timer notify thread.
- 40 · EE_FAILED_TO_CREATE_TIMER_NOTIFY_THREAD_INTERRUPT_EVENT — Failed to create event to interrupt timer notifier thread (OS errno %d).
- 41 · EE_EXITING_TIMER_NOTIFY_THREAD — Failed to register timer event with queue (OS errno %d), exiting timer notifier thread.
- 42 · EE_WIN_LIBRARY_LOAD_FAILED — LoadLibrary("kernel32.dll") failed: GetLastError returns %lu.
- 43 · EE_WIN_RUN_TIME_ERROR_CHECK — %s.
- 44 · EE_FAILED_TO_DETERMINE_LARGE_PAGE_SIZE — Failed to determine large page size.
- 45 · EE_FAILED_TO_KILL_ALL_THREADS — Error in my_thread_global_end(): %d thread(s) did not exit.
- 46 · EE_FAILED_TO_CREATE_IO_COMPLETION_PORT — Failed to create IO completion port (OS errno %d).
- 47 · EE_FAILED_TO_OPEN_DEFAULTS_FILE — Failed to open required defaults file: %s
- 48 · EE_FAILED_TO_HANDLE_DEFAULTS_FILE — Fatal error in defaults handling. Program aborted!
- 49 · EE_WRONG_DIRECTIVE_IN_CONFIG_FILE — Wrong '!%s' directive in config file %s at line %d.
- 50 · EE_SKIPPING_DIRECTIVE_DUE_TO_MAX_INCLUDE_RECURSION — Skipping '%s' directive as maximum include recursion level was reached in file %s at line %d.
- 51 · EE_INCORRECT_GRP_DEFINITION_IN_CONFIG_FILE — Wrong group definition in config file %s at line %d.
- 52 · EE_OPTION_WITHOUT_GRP_IN_CONFIG_FILE — Found option without preceding group in config file %s at line %d.
- 53 · EE_CONFIG_FILE_PERMISSION_ERROR — %s should be readable/writable only by current user.
- 54 · EE_IGNORE_WORLD_WRITABLE_CONFIG_FILE — World-writable config file '%s' is ignored.
- 55 · EE_USING_DISABLED_OPTION — %s: Option '%s' was used, but is disabled.
- 56 · EE_USING_DISABLED_SHORT_OPTION — %s: Option '-%c' was used, but is disabled.
- 57 · EE_USING_PASSWORD_ON_CLI_IS_INSECURE — Using a password on the command line interface can be insecure.
- 58 · EE_UNKNOWN_SUFFIX_FOR_VARIABLE — Unknown suffix '%c' used for variable '%s' (value '%s').
- 59 · EE_SSL_ERROR_FROM_FILE — SSL error: %s from '%s'.
- 60 · EE_SSL_ERROR — SSL error: %s.
- 61 · EE_NET_SEND_ERROR_IN_BOOTSTRAP — %d %s.
- 62 · EE_PACKETS_OUT_OF_ORDER — Packets out of order (found %u, expected %u).
- 63 · EE_UNKNOWN_PROTOCOL_OPTION — Unknown option to protocol: %s.
- 64 · EE_FAILED_TO_LOCATE_SERVER_PUBLIC_KEY — Failed to locate server public key '%s'.
- 65 · EE_PUBLIC_KEY_NOT_IN_PEM_FORMAT — Public key is not in Privacy Enhanced Mail format: '%s'.
- 66 · EE_DEBUG_INFO — %s.
- 67 · EE_UNKNOWN_VARIABLE — unknown variable '%s'.
- 68 · EE_UNKNOWN_OPTION — unknown option '--%s'.
- 69 · EE_UNKNOWN_SHORT_OPTION — %s: unknown option '-%c'.
- 70 · EE_OPTION_WITHOUT_ARGUMENT — %s: option '--%s' cannot take an argument.
- 71 · EE_OPTION_REQUIRES_ARGUMENT — %s: option '--%s' requires an argument.
- 72 · EE_SHORT_OPTION_REQUIRES_ARGUMENT — %s: option '-%c' requires an argument.
- 73 · EE_OPTION_IGNORED_DUE_TO_INVALID_VALUE — %s: ignoring option '--%s' due to invalid value '%s'.
- 74 · EE_OPTION_WITH_EMPTY_VALUE — %s: Empty value for '%s' specified.
- 75 · EE_FAILED_TO_ASSIGN_MAX_VALUE_TO_OPTION — %s: Maximum value of '%s' cannot be set.
- 76 · EE_INCORRECT_BOOLEAN_VALUE_FOR_OPTION — option '%s': boolean value '%s' was not recognized. Set to OFF.
- 77 · EE_FAILED_TO_SET_OPTION_VALUE — %s: Error while setting value '%s' to '%s'.
- 78 · EE_INCORRECT_INT_VALUE_FOR_OPTION — Incorrect integer value: '%s'.
- 79 · EE_INCORRECT_UINT_VALUE_FOR_OPTION — Incorrect unsigned integer value: '%s'.
- 80 · EE_ADJUSTED_SIGNED_VALUE_FOR_OPTION — option '%s': signed value %s adjusted to %s.
- 81 · EE_ADJUSTED_UNSIGNED_VALUE_FOR_OPTION — option '%s': unsigned value %s adjusted to %s.
- 82 · EE_ADJUSTED_ULONGLONG_VALUE_FOR_OPTION — option '%s': value %s adjusted to %s.
- 83 · EE_ADJUSTED_DOUBLE_VALUE_FOR_OPTION — option '%s': value %g adjusted to %g.
- 84 · EE_INVALID_DECIMAL_VALUE_FOR_OPTION — Invalid decimal value for option '%s'.
- 85 · EE_COLLATION_PARSER_ERROR — %s.
- 86 · EE_FAILED_TO_RESET_BEFORE_PRIMARY_IGNORABLE_CHAR — Failed to reset before a primary ignorable character %s.
- 87 · EE_FAILED_TO_RESET_BEFORE_TERTIARY_IGNORABLE_CHAR — Failed to reset before a tertiary ignorable character %s.
- 88 · EE_SHIFT_CHAR_OUT_OF_RANGE — Shift character out of range: %s.
- 89 · EE_RESET_CHAR_OUT_OF_RANGE — Reset character out of range: %s.
- 90 · EE_UNKNOWN_LDML_TAG — Unknown LDML tag: '%.*s'.
- 91 · EE_FAILED_TO_RESET_BEFORE_SECONDARY_IGNORABLE_CHAR — Failed to reset before a secondary ignorable character %s.
- 92 · EE_FAILED_PROCESSING_DIRECTIVE — Stopped processing the '%s' directive in file %s at line %d.
- 93 · EE_PTHREAD_KILL_FAILED — pthread_kill(thread_id:%lu, signal:%s) returned '%s'.
- 1002 · ER_NO — NO
- 1003 · ER_YES — YES
- 1004 · ER_CANT_CREATE_FILE — Can't create file '%s' (errno: %d - %s)
- 1005 · ER_CANT_CREATE_TABLE — Can't create table '%s' (errno: %d - %s)
- 1006 · ER_CANT_CREATE_DB — Can't create database '%s' (errno: %d - %s)
- 1007 · ER_DB_CREATE_EXISTS — Can't create database '%s'; database exists
- 1008 · ER_DB_DROP_EXISTS — Can't drop database '%s'; database doesn't exist
- 1010 · ER_DB_DROP_RMDIR — Error dropping database (can't rmdir '%s', errno: %d - %s)
- 1012 · ER_CANT_FIND_SYSTEM_REC — Can't read record in system table
- 1013 · ER_CANT_GET_STAT — Can't get status of '%s' (errno: %d - %s)
- 1015 · ER_CANT_LOCK — Can't lock file (errno: %d - %s)
- 1016 · ER_CANT_OPEN_FILE — Can't open file: '%s' (errno: %d - %s)
- 1017 · ER_FILE_NOT_FOUND — Can't find file: '%s' (errno: %d - %s)
- 1018 · ER_CANT_READ_DIR — Can't read dir of '%s' (errno: %d - %s)
- 1020 · ER_CHECKREAD — Record has changed since last read in table '%s'
- 1022 · ER_DUP_KEY — Can't write; duplicate key in table '%s'
- 1024 · ER_ERROR_ON_READ — Error reading file '%s' (errno: %d - %s)
- 1025 · ER_ERROR_ON_RENAME — Error on rename of '%s' to '%s' (errno: %d - %s)
- 1026 · ER_ERROR_ON_WRITE — Error writing file '%s' (errno: %d - %s)
- 1027 · ER_FILE_USED — '%s' is locked against change
- 1030 · ER_GET_ERRNO — Got error %d - '%s' from storage engine
- 1031 · ER_ILLEGAL_HA — Table storage engine for '%s' doesn't have this option
- 1032 · ER_KEY_NOT_FOUND — Can't find record in '%s'
- 1033 · ER_NOT_FORM_FILE — Incorrect information in file: '%s'
- 1034 · ER_NOT_KEYFILE — Incorrect key file for table '%s'; try to repair it
- 1035 · ER_OLD_KEYFILE — Old key file for table '%s'; repair it!
- 1036 · ER_OPEN_AS_READONLY — Table '%s' is read only
- 1037 · ER_OUTOFMEMORY — Out of memory; restart server and try again (needed %d bytes)
- 1038 · ER_OUT_OF_SORTMEMORY — Out of sort memory, consider increasing server sort buffer size
- 1040 · ER_CON_COUNT_ERROR — Too many connections
- 1041 · ER_OUT_OF_RESOURCES — Out of memory; check if mysqld or some other process uses all available memory; if not, you may have to use 'ulimit' to allow mysqld to use more memor…
- 1042 · ER_BAD_HOST_ERROR — Can't get hostname for your address
- 1043 · ER_HANDSHAKE_ERROR — Bad handshake
- 1044 · ER_DBACCESS_DENIED_ERROR — Access denied for user '%s'@'%s' to database '%s'
- 1045 · ER_ACCESS_DENIED_ERROR — Access denied for user '%s'@'%s' (using password: %s)
- 1046 · ER_NO_DB_ERROR — No database selected
- 1047 · ER_UNKNOWN_COM_ERROR — Unknown command
- 1048 · ER_BAD_NULL_ERROR — Column '%s' cannot be null
- 1049 · ER_BAD_DB_ERROR — Unknown database '%s'
- 1050 · ER_TABLE_EXISTS_ERROR — Table '%s' already exists
- 1051 · ER_BAD_TABLE_ERROR — Unknown table '%s'
- 1052 · ER_NON_UNIQ_ERROR — Column '%s' in %s is ambiguous
- 1053 · ER_SERVER_SHUTDOWN — Server shutdown in progress
- 1054 · ER_BAD_FIELD_ERROR — Unknown column '%s' in '%s'
- 1055 · ER_WRONG_FIELD_WITH_GROUP — '%s' isn't in GROUP BY
- 1056 · ER_WRONG_GROUP_FIELD — Can't group on '%s'
- 1057 · ER_WRONG_SUM_SELECT — Statement has sum functions and columns in same statement
- 1058 · ER_WRONG_VALUE_COUNT — Column count doesn't match value count
- 1059 · ER_TOO_LONG_IDENT — Identifier name '%s' is too long
- 1060 · ER_DUP_FIELDNAME — Duplicate column name '%s'
- 1061 · ER_DUP_KEYNAME — Duplicate key name '%s'
- 1062 · ER_DUP_ENTRY — Duplicate entry '%s' for key %d
- 1063 · ER_WRONG_FIELD_SPEC — Incorrect column specifier for column '%s'
- 1064 · ER_PARSE_ERROR — %s near '%s' at line %d
- 1065 · ER_EMPTY_QUERY — Query was empty
- 1066 · ER_NONUNIQ_TABLE — Not unique table/alias: '%s'
- 1067 · ER_INVALID_DEFAULT — Invalid default value for '%s'
- 1068 · ER_MULTIPLE_PRI_KEY — Multiple primary key defined
- 1069 · ER_TOO_MANY_KEYS — Too many keys specified; max %d keys allowed
- 1070 · ER_TOO_MANY_KEY_PARTS — Too many key parts specified; max %d parts allowed
- 1071 · ER_TOO_LONG_KEY — Specified key was too long; max key length is %d bytes
- 1072 · ER_KEY_COLUMN_DOES_NOT_EXITS — Key column '%s' doesn't exist in table
- 1073 · ER_BLOB_USED_AS_KEY — BLOB column '%s' can't be used in key specification with the used table type
- 1074 · ER_TOO_BIG_FIELDLENGTH — Column length too big for column '%s' (max = %lu); use BLOB or TEXT instead
- 1075 · ER_WRONG_AUTO_KEY — Incorrect table definition; there can be only one auto column and it must be defined as a key
- 1076 · ER_READY — %s: ready for connections. Version: '%s' socket: '%s' port: %d
- 1079 · ER_SHUTDOWN_COMPLETE — %s: Shutdown complete
- 1080 · ER_FORCING_CLOSE — %s: Forcing close of thread %ld user: '%s'
- 1081 · ER_IPSOCK_ERROR — Can't create IP socket
- 1082 · ER_NO_SUCH_INDEX — Table '%s' has no index like the one used in CREATE INDEX; recreate the table
- 1083 · ER_WRONG_FIELD_TERMINATORS — Field separator argument is not what is expected; check the manual
- 1084 · ER_BLOBS_AND_NO_TERMINATED — You can't use fixed rowlength with BLOBs; please use 'fields terminated by'
- 1085 · ER_TEXTFILE_NOT_READABLE — The file '%s' must be in the database directory or be readable by all
- 1086 · ER_FILE_EXISTS_ERROR — File '%s' already exists
- 1087 · ER_LOAD_INFO — Records: %ld Deleted: %ld Skipped: %ld Warnings: %ld
- 1088 · ER_ALTER_INFO — Records: %ld Duplicates: %ld
- 1089 · ER_WRONG_SUB_KEY — Incorrect prefix key; the used key part isn't a string, the used length is longer than the key part, or the storage engine doesn't support unique pref…
- 1090 · ER_CANT_REMOVE_ALL_FIELDS — You can't delete all columns with ALTER TABLE; use DROP TABLE instead
- 1091 · ER_CANT_DROP_FIELD_OR_KEY — Can't DROP '%s'; check that column/key exists
- 1092 · ER_INSERT_INFO — Records: %ld Duplicates: %ld Warnings: %ld
- 1093 · ER_UPDATE_TABLE_USED — You can't specify target table '%s' for update in FROM clause
- 1094 · ER_NO_SUCH_THREAD — Unknown thread id: %lu
- 1095 · ER_KILL_DENIED_ERROR — You are not owner of thread %lu
- 1096 · ER_NO_TABLES_USED — No tables used
- 1097 · ER_TOO_BIG_SET — Too many strings for column %s and SET
- 1098 · ER_NO_UNIQUE_LOGFILE — Can't generate a unique log-filename %s.(1-999)
- 1099 · ER_TABLE_NOT_LOCKED_FOR_WRITE — Table '%s' was locked with a READ lock and can't be updated
- 1100 · ER_TABLE_NOT_LOCKED — Table '%s' was not locked with LOCK TABLES
- 1101 · ER_BLOB_CANT_HAVE_DEFAULT — BLOB, TEXT, GEOMETRY or JSON column '%s' can't have a default value
- 1102 · ER_WRONG_DB_NAME — Incorrect database name '%s'
- 1103 · ER_WRONG_TABLE_NAME — Incorrect table name '%s'
- 1104 · ER_TOO_BIG_SELECT — The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET MAX_JOIN_SIZE=# if the SELECT is okay
- 1105 · ER_UNKNOWN_ERROR — Unknown error
- 1106 · ER_UNKNOWN_PROCEDURE — Unknown procedure '%s'
- 1107 · ER_WRONG_PARAMCOUNT_TO_PROCEDURE — Incorrect parameter count to procedure '%s'
- 1108 · ER_WRONG_PARAMETERS_TO_PROCEDURE — Incorrect parameters to procedure '%s'
- 1109 · ER_UNKNOWN_TABLE — Unknown table '%s' in %s
- 1110 · ER_FIELD_SPECIFIED_TWICE — Column '%s' specified twice
- 1111 · ER_INVALID_GROUP_FUNC_USE — Invalid use of group function
- 1112 · ER_UNSUPPORTED_EXTENSION — Table '%s' uses an extension that doesn't exist in this MySQL version
- 1113 · ER_TABLE_MUST_HAVE_COLUMNS — A table must have at least 1 column
- 1114 · ER_RECORD_FILE_FULL — The table '%s' is full
- 1115 · ER_UNKNOWN_CHARACTER_SET — Unknown character set: '%s'
- 1116 · ER_TOO_MANY_TABLES — Too many tables; MySQL can only use %d tables in a join
- 1117 · ER_TOO_MANY_FIELDS — Too many columns
- 1118 · ER_TOO_BIG_ROWSIZE — Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. This includes storage overhead, check the manual. You ha…
- 1119 · ER_STACK_OVERRUN — Thread stack overrun: Used: %ld of a %ld stack. Use 'mysqld --thread_stack=#' to specify a bigger stack if needed
- 1120 · ER_WRONG_OUTER_JOIN_UNUSED — Cross dependency found in OUTER JOIN; examine your ON conditions
- 1121 · ER_NULL_COLUMN_IN_INDEX — Table handler doesn't support NULL in given index. Please change column '%s' to be NOT NULL or use another handler
- 1122 · ER_CANT_FIND_UDF — Can't load function '%s'
- 1123 · ER_CANT_INITIALIZE_UDF — Can't initialize function '%s'; %s
- 1124 · ER_UDF_NO_PATHS — No paths allowed for shared library
- 1125 · ER_UDF_EXISTS — Function '%s' already exists
- 1126 · ER_CANT_OPEN_LIBRARY — Can't open shared library '%s' (errno: %d %s)
- 1127 · ER_CANT_FIND_DL_ENTRY — Can't find symbol '%s' in library
- 1128 · ER_FUNCTION_NOT_DEFINED — Function '%s' is not defined
- 1129 · ER_HOST_IS_BLOCKED — Host '%s' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
- 1130 · ER_HOST_NOT_PRIVILEGED — Host '%s' is not allowed to connect to this MySQL server
- 1131 · ER_PASSWORD_ANONYMOUS_USER — You are using MySQL as an anonymous user and anonymous users are not allowed to change passwords
- 1132 · ER_PASSWORD_NOT_ALLOWED — You must have privileges to update tables in the mysql database to be able to change passwords for others
- 1133 · ER_PASSWORD_NO_MATCH — Can't find any matching row in the user table
- 1134 · ER_UPDATE_INFO — Rows matched: %ld Changed: %ld Warnings: %ld
- 1135 · ER_CANT_CREATE_THREAD — Can't create a new thread (errno %d); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug
- 1136 · ER_WRONG_VALUE_COUNT_ON_ROW — Column count doesn't match value count at row %ld
- 1137 · ER_CANT_REOPEN_TABLE — Can't reopen table: '%s'
- 1138 · ER_INVALID_USE_OF_NULL — Invalid use of NULL value
- 1139 · ER_REGEXP_ERROR — Got error '%s' from regexp
- 1140 · ER_MIX_OF_GROUP_FUNC_AND_FIELDS — Mixing of GROUP columns (MIN(),MAX(),COUNT(),...) with no GROUP columns is illegal if there is no GROUP BY clause
- 1141 · ER_NONEXISTING_GRANT — There is no such grant defined for user '%s' on host '%s'
- 1142 · ER_TABLEACCESS_DENIED_ERROR — %s command denied to user '%s'@'%s' for table '%s'
- 1143 · ER_COLUMNACCESS_DENIED_ERROR — %s command denied to user '%s'@'%s' for column '%s' in table '%s'
- 1144 · ER_ILLEGAL_GRANT_FOR_TABLE — Illegal GRANT/REVOKE command; please consult the manual to see which privileges can be used
- 1145 · ER_GRANT_WRONG_HOST_OR_USER — The host or user argument to GRANT is too long
- 1146 · ER_NO_SUCH_TABLE — Table '%s.%s' doesn't exist
- 1147 · ER_NONEXISTING_TABLE_GRANT — There is no such grant defined for user '%s' on host '%s' on table '%s'
- 1148 · ER_NOT_ALLOWED_COMMAND — The used command is not allowed with this MySQL version
- 1149 · ER_SYNTAX_ERROR — You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use
- 1152 · ER_ABORTING_CONNECTION — Aborted connection %ld to db: '%s' user: '%s' (%s)
- 1153 · ER_NET_PACKET_TOO_LARGE — Got a packet bigger than 'max_allowed_packet' bytes
- 1154 · ER_NET_READ_ERROR_FROM_PIPE — Got a read error from the connection pipe
- 1155 · ER_NET_FCNTL_ERROR — Got an error from fcntl()
- 1156 · ER_NET_PACKETS_OUT_OF_ORDER — Got packets out of order
- 1157 · ER_NET_UNCOMPRESS_ERROR — Couldn't uncompress communication packet
- 1158 · ER_NET_READ_ERROR — Got an error reading communication packets
- 1159 · ER_NET_READ_INTERRUPTED — Got timeout reading communication packets
- 1160 · ER_NET_ERROR_ON_WRITE — Got an error writing communication packets
- 1161 · ER_NET_WRITE_INTERRUPTED — Got timeout writing communication packets
- 1162 · ER_TOO_LONG_STRING — Result string is longer than 'max_allowed_packet' bytes
- 1163 · ER_TABLE_CANT_HANDLE_BLOB — The used table type doesn't support BLOB/TEXT columns
- 1164 · ER_TABLE_CANT_HANDLE_AUTO_INCREMENT — The used table type doesn't support AUTO_INCREMENT columns
- 1166 · ER_WRONG_COLUMN_NAME — Incorrect column name '%s'
- 1167 · ER_WRONG_KEY_COLUMN — The used storage engine can't index column '%s'
- 1168 · ER_WRONG_MRG_TABLE — Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
- 1169 · ER_DUP_UNIQUE — Can't write, because of unique constraint, to table '%s'
- 1170 · ER_BLOB_KEY_WITHOUT_LENGTH — BLOB/TEXT column '%s' used in key specification without a key length
- 1171 · ER_PRIMARY_CANT_HAVE_NULL — All parts of a PRIMARY KEY must be NOT NULL; if you need NULL in a key, use UNIQUE instead
- 1172 · ER_TOO_MANY_ROWS — Result consisted of more than one row
- 1173 · ER_REQUIRES_PRIMARY_KEY — This table type requires a primary key
- 1175 · ER_UPDATE_WITHOUT_KEY_IN_SAFE_MODE — You are using safe update mode and you tried to update a table without a WHERE that uses a KEY column. %s
- 1176 · ER_KEY_DOES_NOT_EXITS — Key '%s' doesn't exist in table '%s'
- 1177 · ER_CHECK_NO_SUCH_TABLE — Can't open table
- 1178 · ER_CHECK_NOT_IMPLEMENTED — The storage engine for the table doesn't support %s
- 1179 · ER_CANT_DO_THIS_DURING_AN_TRANSACTION — You are not allowed to execute this command in a transaction
- 1180 · ER_ERROR_DURING_COMMIT — Got error %d - '%s' during COMMIT
- 1181 · ER_ERROR_DURING_ROLLBACK — Got error %d - '%s' during ROLLBACK
- 1182 · ER_ERROR_DURING_FLUSH_LOGS — Got error %d during FLUSH_LOGS
- 1184 · ER_NEW_ABORTING_CONNECTION — Aborted connection %u to db: '%s' user: '%s' host: '%s' (%s)
- 1188 · ER_SOURCE — Error from source: '%s'
- 1189 · ER_SOURCE_NET_READ — Net error reading from source
- 1190 · ER_SOURCE_NET_WRITE — Net error writing to source
- 1191 · ER_FT_MATCHING_KEY_NOT_FOUND — Can't find FULLTEXT index matching the column list
- 1192 · ER_LOCK_OR_ACTIVE_TRANSACTION — Can't execute the given command because you have active locked tables or an active transaction
- 1193 · ER_UNKNOWN_SYSTEM_VARIABLE — Unknown system variable '%s'
- 1194 · ER_CRASHED_ON_USAGE — Table '%s' is marked as crashed and should be repaired
- 1195 · ER_CRASHED_ON_REPAIR — Table '%s' is marked as crashed and last (automatic?) repair failed
- 1196 · ER_WARNING_NOT_COMPLETE_ROLLBACK — Some non-transactional changed tables couldn't be rolled back
- 1197 · ER_TRANS_CACHE_FULL — Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again
- 1199 · ER_REPLICA_NOT_RUNNING — This operation requires a running replica; configure replica and do START REPLICA
- 1200 · ER_BAD_REPLICA — The server is not configured as replica; fix in config file or with CHANGE REPLICATION SOURCE TO
- 1201 · ER_CONNECTION_METADATA — Could not initialize connection metadata structure; more error messages can be found in the MySQL error log
- 1202 · ER_REPLICA_THREAD — Could not create replica thread; check system resources
- 1203 · ER_TOO_MANY_USER_CONNECTIONS — User %s already has more than 'max_user_connections' active connections
- 1204 · ER_SET_CONSTANTS_ONLY — You may only use constant expressions with SET
- 1205 · ER_LOCK_WAIT_TIMEOUT — Lock wait timeout exceeded; try restarting transaction
- 1206 · ER_LOCK_TABLE_FULL — The total number of locks exceeds the lock table size
- 1207 · ER_READ_ONLY_TRANSACTION — Update locks cannot be acquired during a READ UNCOMMITTED transaction
- 1210 · ER_WRONG_ARGUMENTS — Incorrect arguments to %s
- 1211 · ER_NO_PERMISSION_TO_CREATE_USER — '%s'@'%s' is not allowed to create new users
- 1213 · ER_LOCK_DEADLOCK — Deadlock found when trying to get lock; try restarting transaction
- 1214 · ER_TABLE_CANT_HANDLE_FT — The used table type doesn't support FULLTEXT indexes
- 1215 · ER_CANNOT_ADD_FOREIGN — Cannot add foreign key constraint
- 1216 · ER_NO_REFERENCED_ROW — Cannot add or update a child row: a foreign key constraint fails
- 1217 · ER_ROW_IS_REFERENCED — Cannot delete or update a parent row: a foreign key constraint fails
- 1218 · ER_CONNECT_TO_SOURCE — Error connecting to source: %s
- 1220 · ER_ERROR_WHEN_EXECUTING_COMMAND — Error when executing command %s: %s
- 1221 · ER_WRONG_USAGE — Incorrect usage of %s and %s
- 1222 · ER_WRONG_NUMBER_OF_COLUMNS_IN_SELECT — The used SELECT statements have a different number of columns
- 1223 · ER_CANT_UPDATE_WITH_READLOCK — Can't execute the query because you have a conflicting read lock
- 1224 · ER_MIXING_NOT_ALLOWED — Mixing of transactional and non-transactional tables is disabled
- 1225 · ER_DUP_ARGUMENT — Option '%s' used twice in statement
- 1226 · ER_USER_LIMIT_REACHED — User '%s' has exceeded the '%s' resource (current value: %ld)
- 1227 · ER_SPECIFIC_ACCESS_DENIED_ERROR — Access denied; you need (at least one of) the %s privilege(s) for this operation
- 1228 · ER_LOCAL_VARIABLE — Variable '%s' is a SESSION variable and can't be used with SET GLOBAL
- 1229 · ER_GLOBAL_VARIABLE — Variable '%s' is a GLOBAL variable and should be set with SET GLOBAL
- 1230 · ER_NO_DEFAULT — Variable '%s' doesn't have a default value
- 1231 · ER_WRONG_VALUE_FOR_VAR — Variable '%s' can't be set to the value of '%s'
- 1232 · ER_WRONG_TYPE_FOR_VAR — Incorrect argument type to variable '%s'
- 1233 · ER_VAR_CANT_BE_READ — Variable '%s' can only be set, not read
- 1234 · ER_CANT_USE_OPTION_HERE — Incorrect usage/placement of '%s'
- 1235 · ER_NOT_SUPPORTED_YET — This version of MySQL doesn't yet support '%s'
- 1236 · ER_SOURCE_FATAL_ERROR_READING_BINLOG — Got fatal error %d from source when reading data from binary log: '%s'
- 1237 · ER_REPLICA_IGNORED_TABLE — Replica SQL thread ignored the query because of replicate-*-table rules
- 1238 · ER_INCORRECT_GLOBAL_LOCAL_VAR — Variable '%s' is a %s variable
- 1239 · ER_WRONG_FK_DEF — Incorrect foreign key definition for '%s': %s
- 1240 · ER_KEY_REF_DO_NOT_MATCH_TABLE_REF — Key reference and table reference don't match
- 1241 · ER_OPERAND_COLUMNS — Operand should contain %d column(s)
- 1242 · ER_SUBQUERY_NO_1_ROW — Subquery returns more than 1 row
- 1243 · ER_UNKNOWN_STMT_HANDLER — Unknown prepared statement handler (%.*s) given to %s
- 1244 · ER_CORRUPT_HELP_DB — Help database is corrupt or does not exist
- 1246 · ER_AUTO_CONVERT — Converting column '%s' from %s to %s
- 1247 · ER_ILLEGAL_REFERENCE — Reference '%s' not supported (%s)
- 1248 · ER_DERIVED_MUST_HAVE_ALIAS — Every derived table must have its own alias
- 1249 · ER_SELECT_REDUCED — Select %u was reduced during optimization
- 1250 · ER_TABLENAME_NOT_ALLOWED_HERE — Table '%s' from one of the SELECTs cannot be used in %s
- 1251 · ER_NOT_SUPPORTED_AUTH_MODE — Client does not support authentication protocol requested by server; consider upgrading MySQL client
- 1252 · ER_SPATIAL_CANT_HAVE_NULL — All parts of a SPATIAL index must be NOT NULL
- 1253 · ER_COLLATION_CHARSET_MISMATCH — COLLATION '%s' is not valid for CHARACTER SET '%s'
- 1256 · ER_TOO_BIG_FOR_UNCOMPRESS — Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)
- 1257 · ER_ZLIB_Z_MEM_ERROR — ZLIB: Not enough memory
- 1258 · ER_ZLIB_Z_BUF_ERROR — ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)
- 1259 · ER_ZLIB_Z_DATA_ERROR — ZLIB: Input data corrupted
- 1260 · ER_CUT_VALUE_GROUP_CONCAT — Row %u was cut by GROUP_CONCAT()
- 1261 · ER_WARN_TOO_FEW_RECORDS — Row %ld doesn't contain data for all columns
- 1262 · ER_WARN_TOO_MANY_RECORDS — Row %ld was truncated; it contained more data than there were input columns
- 1263 · ER_WARN_NULL_TO_NOTNULL — Column set to default value; NULL supplied to NOT NULL column '%s' at row %ld
- 1264 · ER_WARN_DATA_OUT_OF_RANGE — Out of range value for column '%s' at row %ld
- 1265 · WARN_DATA_TRUNCATED — Data truncated for column '%s' at row %ld
- 1266 · ER_WARN_USING_OTHER_HANDLER — Using storage engine %s for table '%s'
- 1267 · ER_CANT_AGGREGATE_2COLLATIONS — Illegal mix of collations (%s,%s) and (%s,%s) for operation '%s'
- 1269 · ER_REVOKE_GRANTS — Can't revoke all privileges for one or more of the requested users
- 1270 · ER_CANT_AGGREGATE_3COLLATIONS — Illegal mix of collations (%s,%s), (%s,%s), (%s,%s) for operation '%s'
- 1271 · ER_CANT_AGGREGATE_NCOLLATIONS — Illegal mix of collations for operation '%s'
- 1272 · ER_VARIABLE_IS_NOT_STRUCT — Variable '%s' is not a variable component (can't be used as XXXX.variable_name)
- 1273 · ER_UNKNOWN_COLLATION — Unknown collation: '%s'
- 1274 · ER_REPLICA_IGNORED_SSL_PARAMS — SSL parameters in CHANGE REPLICATION SOURCE are ignored because this MySQL replica was compiled without SSL support; they can be used later if MySQL r…
- 1276 · ER_WARN_FIELD_RESOLVED — Field or reference '%s%s%s%s%s' of SELECT #%d was resolved in SELECT #%d
- 1277 · ER_BAD_REPLICA_UNTIL_COND — Incorrect parameter or combination of parameters for START REPLICA UNTIL
- 1278 · ER_MISSING_SKIP_REPLICA — It is recommended to use --skip-replica-start when doing step-by-step replication with START REPLICA UNTIL; otherwise, you will get problems if you ge…
- 1279 · ER_UNTIL_COND_IGNORED — SQL thread is not to be started so UNTIL options are ignored
- 1280 · ER_WRONG_NAME_FOR_INDEX — Incorrect index name '%s'
- 1281 · ER_WRONG_NAME_FOR_CATALOG — Incorrect catalog name '%s'
- 1283 · ER_BAD_FT_COLUMN — Column '%s' cannot be part of FULLTEXT index
- 1284 · ER_UNKNOWN_KEY_CACHE — Unknown key cache '%s'
- 1285 · ER_WARN_HOSTNAME_WONT_WORK — MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work
- 1286 · ER_UNKNOWN_STORAGE_ENGINE — Unknown storage engine '%s'
- 1287 · ER_WARN_DEPRECATED_SYNTAX — '%s' is deprecated and will be removed in a future release. Please use %s instead
- 1288 · ER_NON_UPDATABLE_TABLE — The target table %s of the %s is not updatable
- 1289 · ER_FEATURE_DISABLED — The '%s' feature is disabled; you need MySQL built with '%s' to have it working
- 1290 · ER_OPTION_PREVENTS_STATEMENT — The MySQL server is running with the %s option so it cannot execute this statement
- 1291 · ER_DUPLICATED_VALUE_IN_TYPE — Column '%s' has duplicated value '%s' in %s
- 1292 · ER_TRUNCATED_WRONG_VALUE — Truncated incorrect %s value: '%s'
- 1294 · ER_INVALID_ON_UPDATE — Invalid ON UPDATE clause for '%s' column
- 1295 · ER_UNSUPPORTED_PS — This command is not supported in the prepared statement protocol yet
- 1296 · ER_GET_ERRMSG — Got error %d '%s' from %s
- 1297 · ER_GET_TEMPORARY_ERRMSG — Got temporary error %d '%s' from %s
- 1298 · ER_UNKNOWN_TIME_ZONE — Unknown or incorrect time zone: '%s'
- 1299 · ER_WARN_INVALID_TIMESTAMP — Invalid TIMESTAMP value in column '%s' at row %ld
- 1300 · ER_INVALID_CHARACTER_STRING — Invalid %s character string: '%s'
- 1301 · ER_WARN_ALLOWED_PACKET_OVERFLOWED — Result of %s() was larger than max_allowed_packet (%ld) - truncated
- 1302 · ER_CONFLICTING_DECLARATIONS — Conflicting declarations: '%s%s' and '%s%s'
- 1303 · ER_SP_NO_RECURSIVE_CREATE — Can't create a %s from within another stored routine
- 1304 · ER_SP_ALREADY_EXISTS — %s %s already exists
- 1305 · ER_SP_DOES_NOT_EXIST — %s %s does not exist
- 1306 · ER_SP_DROP_FAILED — Failed to DROP %s %s
- 1307 · ER_SP_STORE_FAILED — Failed to CREATE %s %s
- 1308 · ER_SP_LILABEL_MISMATCH — %s with no matching label: %s
- 1309 · ER_SP_LABEL_REDEFINE — Redefining label %s
- 1310 · ER_SP_LABEL_MISMATCH — End-label %s without match
- 1311 · ER_SP_UNINIT_VAR — Referring to uninitialized variable %s
- 1312 · ER_SP_BADSELECT — PROCEDURE %s can't return a result set in the given context
- 1313 · ER_SP_BADRETURN — RETURN is only allowed in a FUNCTION
- 1314 · ER_SP_BADSTATEMENT — %s is not allowed in stored procedures
- 1315 · ER_UPDATE_LOG_DEPRECATED_IGNORED — The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been ignored.
- 1316 · ER_UPDATE_LOG_DEPRECATED_TRANSLATED — The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been translated to SET SQL_LOG_BIN.
- 1317 · ER_QUERY_INTERRUPTED — Query execution was interrupted
- 1318 · ER_SP_WRONG_NO_OF_ARGS — Incorrect number of arguments for %s %s; expected %u, got %u
- 1319 · ER_SP_COND_MISMATCH — Undefined CONDITION: %s
- 1320 · ER_SP_NORETURN — No RETURN found in FUNCTION %s
- 1321 · ER_SP_NORETURNEND — FUNCTION %s ended without RETURN
- 1322 · ER_SP_BAD_CURSOR_QUERY — Cursor statement must be a SELECT
- 1323 · ER_SP_BAD_CURSOR_SELECT — Cursor SELECT must not have INTO
- 1324 · ER_SP_CURSOR_MISMATCH — Undefined CURSOR: %s
- 1325 · ER_SP_CURSOR_ALREADY_OPEN — Cursor is already open
- 1326 · ER_SP_CURSOR_NOT_OPEN — Cursor is not open
- 1327 · ER_SP_UNDECLARED_VAR — Undeclared variable: %s
- 1328 · ER_SP_WRONG_NO_OF_FETCH_ARGS — Incorrect number of FETCH variables
- 1329 · ER_SP_FETCH_NO_DATA — No data - zero rows fetched, selected, or processed
- 1330 · ER_SP_DUP_PARAM — Duplicate parameter: %s
- 1331 · ER_SP_DUP_VAR — Duplicate variable: %s
- 1332 · ER_SP_DUP_COND — Duplicate condition: %s
- 1333 · ER_SP_DUP_CURS — Duplicate cursor: %s
- 1334 · ER_SP_CANT_ALTER — Failed to ALTER %s %s
- 1335 · ER_SP_SUBSELECT_NYI — Subquery value not supported
- 1336 · ER_STMT_NOT_ALLOWED_IN_SF_OR_TRG — %s is not allowed in stored function or trigger
- 1337 · ER_SP_VARCOND_AFTER_CURSHNDLR — Variable or condition declaration after cursor or handler declaration
- 1338 · ER_SP_CURSOR_AFTER_HANDLER — Cursor declaration after handler declaration
- 1339 · ER_SP_CASE_NOT_FOUND — Case not found for CASE statement
- 1340 · ER_FPARSER_TOO_BIG_FILE — Configuration file '%s' is too big
- 1341 · ER_FPARSER_BAD_HEADER — Malformed file type header in file '%s'
- 1342 · ER_FPARSER_EOF_IN_COMMENT — Unexpected end of file while parsing comment '%s'
- 1343 · ER_FPARSER_ERROR_IN_PARAMETER — Error while parsing parameter '%s' (line: '%s')
- 1344 · ER_FPARSER_EOF_IN_UNKNOWN_PARAMETER — Unexpected end of file while skipping unknown parameter '%s'
- 1345 · ER_VIEW_NO_EXPLAIN — EXPLAIN/SHOW can not be issued; lacking privileges for underlying table
- 1347 · ER_WRONG_OBJECT — '%s.%s' is not %s
- 1348 · ER_NONUPDATEABLE_COLUMN — Column '%s' is not updatable
- 1350 · ER_VIEW_SELECT_CLAUSE — View's SELECT contains a '%s' clause
- 1351 · ER_VIEW_SELECT_VARIABLE — View's SELECT contains a variable or parameter
- 1352 · ER_VIEW_SELECT_TMPTABLE — View's SELECT refers to a temporary table '%s'
- 1353 · ER_VIEW_WRONG_LIST — In definition of view, derived table or common table expression, SELECT list and column names list have different column counts
- 1354 · ER_WARN_VIEW_MERGE — View merge algorithm can't be used here for now (assumed undefined algorithm)
- 1355 · ER_WARN_VIEW_WITHOUT_KEY — View being updated does not have complete key of underlying table in it
- 1356 · ER_VIEW_INVALID — View '%s.%s' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them
- 1357 · ER_SP_NO_DROP_SP — Can't drop or alter a %s from within another stored routine
- 1359 · ER_TRG_ALREADY_EXISTS — Trigger already exists
- 1360 · ER_TRG_DOES_NOT_EXIST — Trigger does not exist
- 1361 · ER_TRG_ON_VIEW_OR_TEMP_TABLE — Trigger's '%s' is view or temporary table
- 1362 · ER_TRG_CANT_CHANGE_ROW — Updating of %s row is not allowed in %strigger
- 1363 · ER_TRG_NO_SUCH_ROW_IN_TRG — There is no %s row in %s trigger
- 1364 · ER_NO_DEFAULT_FOR_FIELD — Field '%s' doesn't have a default value
- 1365 · ER_DIVISION_BY_ZERO — Division by 0
- 1366 · ER_TRUNCATED_WRONG_VALUE_FOR_FIELD — Incorrect %s value: '%s' for column '%s' at row %ld
- 1367 · ER_ILLEGAL_VALUE_FOR_TYPE — Illegal %s '%s' value found during parsing
- 1368 · ER_VIEW_NONUPD_CHECK — CHECK OPTION on non-updatable view '%s.%s'
- 1369 · ER_VIEW_CHECK_FAILED — CHECK OPTION failed '%s.%s'
- 1370 · ER_PROCACCESS_DENIED_ERROR — %s command denied to user '%s'@'%s' for routine '%s'
- 1371 · ER_RELAY_LOG_FAIL — Failed purging old relay logs: %s
- 1373 · ER_UNKNOWN_TARGET_BINLOG — Target log not found in binlog index
- 1374 · ER_IO_ERR_LOG_INDEX_READ — I/O error reading log index file
- 1375 · ER_BINLOG_PURGE_PROHIBITED — Server configuration does not permit binlog purge
- 1376 · ER_FSEEK_FAIL — Failed on fseek()
- 1377 · ER_BINLOG_PURGE_FATAL_ERR — Fatal error during log purge
- 1378 · ER_LOG_IN_USE — A purgeable log is in use, will not purge
- 1379 · ER_LOG_PURGE_UNKNOWN_ERR — Unknown error during log purge
- 1380 · ER_RELAY_LOG_INIT — Failed initializing relay log position: %s
- 1381 · ER_NO_BINARY_LOGGING — You are not using binary logging
- 1382 · ER_RESERVED_SYNTAX — The '%s' syntax is reserved for purposes internal to the MySQL server
- 1390 · ER_PS_MANY_PARAM — Prepared statement contains too many placeholders
- 1391 · ER_KEY_PART_0 — Key part '%s' length cannot be 0
- 1392 · ER_VIEW_CHECKSUM — View text checksum failed
- 1393 · ER_VIEW_MULTIUPDATE — Can not modify more than one base table through a join view '%s.%s'
- 1394 · ER_VIEW_NO_INSERT_FIELD_LIST — Can not insert into join view '%s.%s' without fields list
- 1395 · ER_VIEW_DELETE_MERGE_VIEW — Can not delete from join view '%s.%s'
- 1396 · ER_CANNOT_USER — Operation %s failed for %s
- 1397 · ER_XAER_NOTA — XAER_NOTA: Unknown XID
- 1398 · ER_XAER_INVAL — XAER_INVAL: Invalid arguments (or unsupported command)
- 1399 · ER_XAER_RMFAIL — XAER_RMFAIL: The command cannot be executed when global transaction is in the %s state
- 1400 · ER_XAER_OUTSIDE — XAER_OUTSIDE: Some work is done outside global transaction
- 1401 · ER_XAER_RMERR — XAER_RMERR: Fatal error occurred in the transaction branch - check your data for consistency
- 1402 · ER_XA_RBROLLBACK — XA_RBROLLBACK: Transaction branch was rolled back
- 1403 · ER_NONEXISTING_PROC_GRANT — There is no such grant defined for user '%s' on host '%s' on routine '%s'
- 1404 · ER_PROC_AUTO_GRANT_FAIL — Failed to grant EXECUTE and ALTER ROUTINE privileges
- 1405 · ER_PROC_AUTO_REVOKE_FAIL — Failed to revoke all privileges to dropped routine
- 1406 · ER_DATA_TOO_LONG — Data too long for column '%s' at row %ld
- 1407 · ER_SP_BAD_ — Bad SQLSTATE: '%s'
- 1408 · ER_STARTUP — %s: ready for connections. Version: '%s' socket: '%s' port: %d %s
- 1409 · ER_LOAD_FROM_FIXED_SIZE_ROWS_TO_VAR — Can't load value from file with fixed size rows to variable
- 1410 · ER_CANT_CREATE_USER_WITH_GRANT — You are not allowed to create a user with GRANT
- 1411 · ER_WRONG_VALUE_FOR_TYPE — Incorrect %s value: '%s' for function %s
- 1412 · ER_TABLE_DEF_CHANGED — Table definition has changed, please retry transaction
- 1413 · ER_SP_DUP_HANDLER — Duplicate handler declared in the same block
- 1414 · ER_SP_NOT_VAR_ARG — OUT or INOUT argument %d for routine %s is not a variable or NEW pseudo-variable in BEFORE trigger
- 1415 · ER_SP_NO_RETSET — Not allowed to return a result set from a %s
- 1416 · ER_CANT_CREATE_GEOMETRY_OBJECT — Cannot get geometry object from data you send to the GEOMETRY field
- 1418 · ER_BINLOG_UNSAFE_ROUTINE — This function has none of DETERMINISTIC, NO SQL, or READS SQL DATA in its declaration and binary logging is enabled (you *might* want to use the less …
- 1419 · ER_BINLOG_CREATE_ROUTINE_NEED_SUPER — You do not have the SUPER privilege and binary logging is enabled (you *might* want to use the less safe log_bin_trust_function_creators variable)
- 1421 · ER_STMT_HAS_NO_OPEN_CURSOR — The statement (%lu) has no open cursor.
- 1422 · ER_COMMIT_NOT_ALLOWED_IN_SF_OR_TRG — Explicit or implicit commit is not allowed in stored function or trigger.
- 1423 · ER_NO_DEFAULT_FOR_VIEW_FIELD — Field of view '%s.%s' underlying table doesn't have a default value
- 1424 · ER_SP_NO_RECURSION — Recursive stored functions and triggers are not allowed.
- 1425 · ER_TOO_BIG_SCALE — Too big scale %d specified for column '%s'. Maximum is %lu.
- 1426 · ER_TOO_BIG_PRECISION — Too-big precision %d specified for '%s'. Maximum is %lu.
- 1427 · ER_M_BIGGER_THAN_D — For float(M,D), double(M,D) or decimal(M,D), M must be >= D (column '%s').
- 1428 · ER_WRONG_LOCK_OF_SYSTEM_TABLE — You can't combine write-locking of system tables with other tables or lock types
- 1429 · ER_CONNECT_TO_FOREIGN_DATA_SOURCE — Unable to connect to foreign data source: %s
- 1430 · ER_QUERY_ON_FOREIGN_DATA_SOURCE — There was a problem processing the query on the foreign data source. Data source error: %s
- 1431 · ER_FOREIGN_DATA_SOURCE_DOESNT_EXIST — The foreign data source you are trying to reference does not exist. Data source error: %s
- 1432 · ER_FOREIGN_DATA_STRING_INVALID_CANT_CREATE — Can't create federated table. The data source connection string '%s' is not in the correct format
- 1433 · ER_FOREIGN_DATA_STRING_INVALID — The data source connection string '%s' is not in the correct format
- 1435 · ER_TRG_IN_WRONG_SCHEMA — Trigger in wrong schema
- 1436 · ER_STACK_OVERRUN_NEED_MORE — Thread stack overrun: %ld bytes used of a %ld byte stack, and %ld bytes needed. Use 'mysqld --thread_stack=#' to specify a bigger stack.
- 1437 · ER_TOO_LONG_BODY — Routine body for '%s' is too long
- 1438 · ER_WARN_CANT_DROP_DEFAULT_KEYCACHE — Cannot drop default keycache
- 1439 · ER_TOO_BIG_DISPLAYWIDTH — Display width out of range for column '%s' (max = %lu)
- 1440 · ER_XAER_DUPID — XAER_DUPID: The XID already exists
- 1441 · ER_DATETIME_FUNCTION_OVERFLOW — Datetime function: %s field overflow
- 1442 · ER_CANT_UPDATE_USED_TABLE_IN_SF_OR_TRG — Can't update table '%s' in stored function/trigger because it is already used by statement which invoked this stored function/trigger.
- 1443 · ER_VIEW_PREVENT_UPDATE — The definition of table '%s' prevents operation %s on table '%s'.
- 1444 · ER_PS_NO_RECURSION — The prepared statement contains a stored routine call that refers to that same statement. It's not allowed to execute a prepared statement in such a r…
- 1445 · ER_SP_CANT_SET_AUTOCOMMIT — Not allowed to set autocommit from a stored function or trigger
- 1447 · ER_VIEW_FRM_NO_USER — View '%s'.'%s' has no definer information (old table format). Current user is used as definer. Please recreate the view!
- 1448 · ER_VIEW_OTHER_USER — You need the SUPER privilege for creation view with '%s'@'%s' definer
- 1449 · ER_NO_SUCH_USER — The user specified as a definer ('%s'@'%s') does not exist
- 1450 · ER_FORBID_SCHEMA_CHANGE — Changing schema from '%s' to '%s' is not allowed.
- 1451 · ER_ROW_IS_REFERENCED_2 — Cannot delete or update a parent row: a foreign key constraint fails%s
- 1452 · ER_NO_REFERENCED_ROW_2 — Cannot add or update a child row: a foreign key constraint fails%s
- 1453 · ER_SP_BAD_VAR_SHADOW — Variable '%s' must be quoted with `...`, or renamed
- 1454 · ER_TRG_NO_DEFINER — No definer attribute for trigger '%s'.'%s'. It's disallowed to create trigger without definer.
- 1455 · ER_OLD_FILE_FORMAT — '%s' has an old format, you should re-create the '%s' object(s)
- 1456 · ER_SP_RECURSION_LIMIT — Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %s
- 1458 · ER_SP_WRONG_NAME — Incorrect routine name '%s'
- 1459 · ER_TABLE_NEEDS_UPGRADE — Table upgrade required. Please do "REPAIR TABLE `%s`" or dump/reload to fix it!
- 1460 · ER_SP_NO_AGGREGATE — AGGREGATE is not supported for stored functions
- 1461 · ER_MAX_PREPARED_STMT_COUNT_REACHED — Can't create more than max_prepared_stmt_count statements (current value: %lu)
- 1462 · ER_VIEW_RECURSIVE — `%s`.`%s` contains view recursion
- 1463 · ER_NON_GROUPING_FIELD_USED — Non-grouping field '%s' is used in %s clause
- 1464 · ER_TABLE_CANT_HANDLE_SPKEYS — The used table type doesn't support SPATIAL indexes
- 1465 · ER_NO_TRIGGERS_ON_SYSTEM_SCHEMA — Triggers can not be created on system tables
- 1466 · ER_REMOVED_SPACES — Leading spaces are removed from name '%s'
- 1467 · ER_AUTOINC_READ_FAILED — Failed to read auto-increment value from storage engine
- 1468 · ER_USERNAME — user name
- 1469 · ER_HOSTNAME — host name
- 1470 · ER_WRONG_STRING_LENGTH — String '%s' is too long for %s (should be no longer than %d)
- 1471 · ER_NON_INSERTABLE_TABLE — The target table %s of the %s is not insertable-into
- 1472 · ER_ADMIN_WRONG_MRG_TABLE — Table '%s' is differently defined or of non-MyISAM type or doesn't exist
- 1473 · ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT — Too high level of nesting for select
- 1474 · ER_NAME_BECOMES_EMPTY — Name '%s' has become ''
- 1475 · ER_AMBIGUOUS_FIELD_TERM — First character of the FIELDS TERMINATED string is ambiguous; please use non-optional and non-empty FIELDS ENCLOSED BY
- 1476 · ER_FOREIGN_SERVER_EXISTS — The foreign server, %s, you are trying to create already exists.
- 1477 · ER_FOREIGN_SERVER_DOESNT_EXIST — The foreign server name you are trying to reference does not exist. Data source error: %s
- 1478 · ER_ILLEGAL_HA_CREATE_OPTION — Table storage engine '%s' does not support the create option '%s'
- 1479 · ER_PARTITION_REQUIRES_VALUES_ERROR — Syntax error: %s PARTITIONING requires definition of VALUES %s for each partition
- 1480 · ER_PARTITION_WRONG_VALUES_ERROR — Only %s PARTITIONING can use VALUES %s in partition definition
- 1481 · ER_PARTITION_MAXVALUE_ERROR — MAXVALUE can only be used in last partition definition
- 1484 · ER_PARTITION_WRONG_NO_PART_ERROR — Wrong number of partitions defined, mismatch with previous setting
- 1485 · ER_PARTITION_WRONG_NO_SUBPART_ERROR — Wrong number of subpartitions defined, mismatch with previous setting
- 1486 · ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR — Constant, random or timezone-dependent expressions in (sub)partitioning function are not allowed
- 1488 · ER_FIELD_NOT_FOUND_PART_ERROR — Field in list of fields for partition function not found in table
- 1490 · ER_INCONSISTENT_PARTITION_INFO_ERROR — The partition info in the frm file is not consistent with what can be written into the frm file
- 1491 · ER_PARTITION_FUNC_NOT_ALLOWED_ERROR — The %s function returns the wrong type
- 1492 · ER_PARTITIONS_MUST_BE_DEFINED_ERROR — For %s partitions each partition must be defined
- 1493 · ER_RANGE_NOT_INCREASING_ERROR — VALUES LESS THAN value must be strictly increasing for each partition
- 1494 · ER_INCONSISTENT_TYPE_OF_FUNCTIONS_ERROR — VALUES value must be of same type as partition function
- 1495 · ER_MULTIPLE_DEF_CONST_IN_LIST_PART_ERROR — Multiple definition of same constant in list partitioning
- 1496 · ER_PARTITION_ENTRY_ERROR — Partitioning can not be used stand-alone in query
- 1497 · ER_MIX_HANDLER_ERROR — The mix of handlers in the partitions is not allowed in this version of MySQL
- 1498 · ER_PARTITION_NOT_DEFINED_ERROR — For the partitioned engine it is necessary to define all %s
- 1499 · ER_TOO_MANY_PARTITIONS_ERROR — Too many partitions (including subpartitions) were defined
- 1500 · ER_SUBPARTITION_ERROR — It is only possible to mix RANGE/LIST partitioning with HASH/KEY partitioning for subpartitioning
- 1501 · ER_CANT_CREATE_HANDLER_FILE — Failed to create specific handler file
- 1502 · ER_BLOB_FIELD_IN_PART_FUNC_ERROR — A BLOB field is not allowed in partition function
- 1503 · ER_UNIQUE_KEY_NEED_ALL_FIELDS_IN_PF — A %s must include all columns in the table's partitioning function (prefixed columns are not considered).
- 1504 · ER_NO_PARTS_ERROR — Number of %s = 0 is not an allowed value
- 1505 · ER_PARTITION_MGMT_ON_NONPARTITIONED — Partition management on a not partitioned table is not possible
- 1506 · ER_FOREIGN_KEY_ON_PARTITIONED — Foreign keys are not yet supported in conjunction with partitioning
- 1507 · ER_DROP_PARTITION_NON_EXISTENT — Error in list of partitions to %s
- 1508 · ER_DROP_LAST_PARTITION — Cannot remove all partitions, use DROP TABLE instead
- 1509 · ER_COALESCE_ONLY_ON_HASH_PARTITION — COALESCE PARTITION can only be used on HASH/KEY partitions
- 1510 · ER_REORG_HASH_ONLY_ON_SAME_NO — REORGANIZE PARTITION can only be used to reorganize partitions not to change their numbers
- 1511 · ER_REORG_NO_PARAM_ERROR — REORGANIZE PARTITION without parameters can only be used on auto-partitioned tables using HASH PARTITIONs
- 1512 · ER_ONLY_ON_RANGE_LIST_PARTITION — %s PARTITION can only be used on RANGE/LIST partitions
- 1513 · ER_ADD_PARTITION_SUBPART_ERROR — Trying to Add partition(s) with wrong number of subpartitions
- 1514 · ER_ADD_PARTITION_NO_NEW_PARTITION — At least one partition must be added
- 1515 · ER_COALESCE_PARTITION_NO_PARTITION — At least one partition must be coalesced
- 1516 · ER_REORG_PARTITION_NOT_EXIST — More partitions to reorganize than there are partitions
- 1517 · ER_SAME_NAME_PARTITION — Duplicate partition name %s
- 1518 · ER_NO_BINLOG_ERROR — It is not allowed to shut off binlog on this command
- 1519 · ER_CONSECUTIVE_REORG_PARTITIONS — When reorganizing a set of partitions they must be in consecutive order
- 1520 · ER_REORG_OUTSIDE_RANGE — Reorganize of range partitions cannot change total ranges except for last partition where it can extend the range
- 1521 · ER_PARTITION_FUNCTION_FAILURE — Partition function not supported in this version for this handler
- 1523 · ER_LIMITED_PART_RANGE — The %s handler only supports 32 bit integers in VALUES
- 1524 · ER_PLUGIN_IS_NOT_LOADED — Plugin '%s' is not loaded
- 1525 · ER_WRONG_VALUE — Incorrect %s value: '%s'
- 1526 · ER_NO_PARTITION_FOR_GIVEN_VALUE — Table has no partition for value %s
- 1527 · ER_FILEGROUP_OPTION_ONLY_ONCE — It is not allowed to specify %s more than once
- 1528 · ER_CREATE_FILEGROUP_FAILED — Failed to create %s
- 1529 · ER_DROP_FILEGROUP_FAILED — Failed to drop %s
- 1530 · ER_TABLESPACE_AUTO_EXTEND_ERROR — The handler doesn't support autoextend of tablespaces
- 1531 · ER_WRONG_SIZE_NUMBER — A size parameter was incorrectly specified, either number or on the form 10M
- 1532 · ER_SIZE_OVERFLOW_ERROR — The size number was correct but we don't allow the digit part to be more than 2 billion
- 1533 · ER_ALTER_FILEGROUP_FAILED — Failed to alter: %s
- 1534 · ER_BINLOG_ROW_LOGGING_FAILED — Writing one row to the row-based binary log failed
- 1537 · ER_EVENT_ALREADY_EXISTS — Event '%s' already exists
- 1539 · ER_EVENT_DOES_NOT_EXIST — Unknown event '%s'
- 1542 · ER_EVENT_INTERVAL_NOT_POSITIVE_OR_TOO_BIG — INTERVAL is either not positive or too big
- 1543 · ER_EVENT_ENDS_BEFORE_STARTS — ENDS is either invalid or before STARTS
- 1544 · ER_EVENT_EXEC_TIME_IN_THE_PAST — Event execution time is in the past. Event has been disabled
- 1551 · ER_EVENT_SAME_NAME — Same old and new event name
- 1553 · ER_DROP_INDEX_FK — Cannot drop index '%s': needed in a foreign key constraint
- 1554 · ER_WARN_DEPRECATED_SYNTAX_WITH_VER — The syntax '%s' is deprecated and will be removed in MySQL %s. Please use %s instead
- 1556 · ER_CANT_LOCK_LOG_TABLE — You can't use locks with log tables.
- 1557 · ER_FOREIGN_DUPLICATE_KEY_OLD_UNUSED — Upholding foreign key constraints for table '%s', entry '%s', key %d would lead to a duplicate entry
- 1558 · ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE — The column count of mysql.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please perform the MySQL upgrade procedure.
- 1560 · ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_FORMAT — Cannot change the binary logging format inside a stored function or trigger
- 1562 · ER_PARTITION_NO_TEMPORARY — Cannot create temporary table with partitions
- 1563 · ER_PARTITION_CONST_DOMAIN_ERROR — Partition constant is out of partition function domain
- 1564 · ER_PARTITION_FUNCTION_IS_NOT_ALLOWED — This partition function is not allowed
- 1566 · ER_NULL_IN_VALUES_LESS_THAN — Not allowed to use NULL value in VALUES LESS THAN
- 1567 · ER_WRONG_PARTITION_NAME — Incorrect partition name
- 1568 · ER_CANT_CHANGE_TX_CHARACTERISTICS — Transaction characteristics can't be changed while a transaction is in progress
- 1569 · ER_DUP_ENTRY_AUTOINCREMENT_CASE — ALTER TABLE causes auto_increment resequencing, resulting in duplicate entry '%s' for key '%s'
- 1571 · ER_EVENT_SET_VAR_ERROR — Error during starting/stopping of the scheduler. Error code %u
- 1572 · ER_PARTITION_MERGE_ERROR — Engine cannot be used in partitioned tables
- 1575 · ER_BASE64_DECODE_ERROR — Decoding of base64 string failed
- 1576 · ER_EVENT_RECURSION_FORBIDDEN — Recursion of EVENT DDL statements is forbidden when body is present
- 1578 · ER_ONLY_INTEGERS_ALLOWED — Only integers allowed as number here
- 1579 · ER_UNSUPORTED_LOG_ENGINE — This storage engine cannot be used for log tables
- 1580 · ER_BAD_LOG_STATEMENT — You cannot '%s' a log table if logging is enabled
- 1581 · ER_CANT_RENAME_LOG_TABLE — Cannot rename '%s'. When logging enabled, rename to/from log table must rename two tables: the log table to an archive table and another table back to…
- 1582 · ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT — Incorrect parameter count in the call to native function '%s'
- 1583 · ER_WRONG_PARAMETERS_TO_NATIVE_FCT — Incorrect parameters in the call to native function '%s'
- 1584 · ER_WRONG_PARAMETERS_TO_STORED_FCT — Incorrect parameters in the call to stored function %s
- 1585 · ER_NATIVE_FCT_NAME_COLLISION — This function '%s' has the same name as a native function
- 1586 · ER_DUP_ENTRY_WITH_KEY_NAME — Duplicate entry '%s' for key '%s'
- 1587 · ER_BINLOG_PURGE_EMFILE — Too many files opened, please execute the command again
- 1588 · ER_EVENT_CANNOT_CREATE_IN_THE_PAST — Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was dropped immediately after creation.
- 1589 · ER_EVENT_CANNOT_ALTER_IN_THE_PAST — Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was not changed. Specify a time in the future.
- 1591 · ER_NO_PARTITION_FOR_GIVEN_VALUE_SILENT — Table has no partition for some existing values
- 1592 · ER_BINLOG_UNSAFE_STATEMENT — Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. %s
- 1593 · ER_BINLOG_FATAL_ERROR — Fatal error: %s
- 1598 · ER_BINLOG_LOGGING_IMPOSSIBLE — Binary logging not possible. Message: %s
- 1599 · ER_VIEW_NO_CREATION_CTX — View `%s`.`%s` has no creation context
- 1600 · ER_VIEW_INVALID_CREATION_CTX — Creation context of view `%s`.`%s' is invalid
- 1602 · ER_TRG_CORRUPTED_FILE — Corrupted TRG file for table `%s`.`%s`
- 1603 · ER_TRG_NO_CREATION_CTX — Triggers for table `%s`.`%s` have no creation context
- 1604 · ER_TRG_INVALID_CREATION_CTX — Trigger creation context of table `%s`.`%s` is invalid
- 1605 · ER_EVENT_INVALID_CREATION_CTX — Creation context of event `%s`.`%s` is invalid
- 1606 · ER_TRG_CANT_OPEN_TABLE — Cannot open table for trigger `%s`.`%s`
- 1609 · ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENT — The BINLOG statement of type `%s` was not preceded by a format description BINLOG statement.
- 1610 · ER_REPLICA_CORRUPT_EVENT — Corrupted replication event was detected
- 1612 · ER_LOG_PURGE_NO_FILE — Being purged log %s was not found
- 1613 · ER_XA_RBTIMEOUT — XA_RBTIMEOUT: Transaction branch was rolled back: took too long
- 1614 · ER_XA_RBDEADLOCK — XA_RBDEADLOCK: Transaction branch was rolled back: deadlock was detected
- 1615 · ER_NEED_REPREPARE — Prepared statement needs to be re-prepared
- 1617 · WARN_NO_CONNECTION_METADATA — The connection metadata structure does not exist
- 1618 · WARN_OPTION_IGNORED — <%s> option ignored
- 1619 · ER_PLUGIN_DELETE_BUILTIN — Built-in plugins cannot be deleted
- 1620 · WARN_PLUGIN_BUSY — Plugin is busy and will be uninstalled on shutdown
- 1621 · ER_VARIABLE_IS_READONLY — %s variable '%s' is read-only. Use SET %s to assign the value
- 1622 · ER_WARN_ENGINE_TRANSACTION_ROLLBACK — Storage engine %s does not support rollback for this statement. Transaction rolled back and must be restarted
- 1624 · ER_REPLICA_HEARTBEAT_VALUE_OUT_OF_RANGE — The requested value for the heartbeat period is either negative or exceeds the maximum allowed (%s seconds).
- 1625 · ER_NDB_REPLICATION_SCHEMA_ERROR — Bad schema for mysql.ndb_replication table. Message: %s
- 1626 · ER_CONFLICT_FN_PARSE_ERROR — Error in parsing conflict function. Message: %s
- 1627 · ER_EXCEPTIONS_WRITE_ERROR — Write to exceptions table failed. Message: %s
- 1628 · ER_TOO_LONG_TABLE_COMMENT — Comment for table '%s' is too long (max = %lu)
- 1629 · ER_TOO_LONG_FIELD_COMMENT — Comment for field '%s' is too long (max = %lu)
- 1630 · ER_FUNC_INEXISTENT_NAME_COLLISION — FUNCTION %s does not exist. Check the 'Function Name Parsing and Resolution' section in the Reference Manual
- 1631 · ER_DATABASE_NAME — Database
- 1632 · ER_TABLE_NAME — Table
- 1633 · ER_PARTITION_NAME — Partition
- 1634 · ER_SUBPARTITION_NAME — Subpartition
- 1635 · ER_TEMPORARY_NAME — Temporary
- 1636 · ER_RENAMED_NAME — Renamed
- 1637 · ER_TOO_MANY_CONCURRENT_TRXS — Too many active concurrent transactions
- 1638 · WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED — Non-ASCII separator arguments are not fully supported
- 1639 · ER_DEBUG_SYNC_TIMEOUT — debug sync point wait timed out
- 1640 · ER_DEBUG_SYNC_HIT_LIMIT — debug sync point hit limit reached
- 1641 · ER_DUP_SIGNAL_SET — Duplicate condition information item '%s'
- 1642 · ER_SIGNAL_WARN — Unhandled user-defined warning condition
- 1643 · ER_SIGNAL_NOT_FOUND — Unhandled user-defined not found condition
- 1644 · ER_SIGNAL_EXCEPTION — Unhandled user-defined exception condition
- 1645 · ER_RESIGNAL_WITHOUT_ACTIVE_HANDLER — RESIGNAL when handler not active
- 1646 · ER_SIGNAL_BAD_CONDITION_TYPE — SIGNAL/RESIGNAL can only use a CONDITION defined with SQLSTATE
- 1647 · WARN_COND_ITEM_TRUNCATED — Data truncated for condition item '%s'
- 1648 · ER_COND_ITEM_TOO_LONG — Data too long for condition item '%s'
- 1649 · ER_UNKNOWN_LOCALE — Unknown locale: '%s'
- 1650 · ER_REPLICA_IGNORE_SERVER_IDS — The requested server id %d clashes with the replica startup option --replicate-same-server-id
- 1652 · ER_SAME_NAME_PARTITION_FIELD — Duplicate partition field name '%s'
- 1653 · ER_PARTITION_COLUMN_LIST_ERROR — Inconsistency in usage of column lists for partitioning
- 1654 · ER_WRONG_TYPE_COLUMN_VALUE_ERROR — Partition column values of incorrect type
- 1655 · ER_TOO_MANY_PARTITION_FUNC_FIELDS_ERROR — Too many fields in '%s'
- 1656 · ER_MAXVALUE_IN_VALUES_IN — Cannot use MAXVALUE as value in VALUES IN
- 1657 · ER_TOO_MANY_VALUES_ERROR — Cannot have more than one value for this type of %s partitioning
- 1658 · ER_ROW_SINGLE_PARTITION_FIELD_ERROR — Row expressions in VALUES IN only allowed for multi-field column partitioning
- 1659 · ER_FIELD_TYPE_NOT_ALLOWED_AS_PARTITION_FIELD — Field '%s' is of a not allowed type for this type of partitioning
- 1660 · ER_PARTITION_FIELDS_TOO_LONG — The total length of the partitioning fields is too large
- 1661 · ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE — Cannot execute statement: impossible to write to binary log since both row-incapable engines and statement-incapable engines are involved.
- 1662 · ER_BINLOG_ROW_MODE_AND_STMT_ENGINE — Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = ROW and at least one table uses a storage engine limited to statemen…
- 1663 · ER_BINLOG_UNSAFE_AND_STMT_ENGINE — Cannot execute statement: impossible to write to binary log since statement is unsafe, storage engine is limited to statement-based logging, and BINLO…
- 1664 · ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE — Cannot execute statement: impossible to write to binary log since statement is in row format and at least one table uses a storage engine limited to s…
- 1665 · ER_BINLOG_STMT_MODE_AND_ROW_ENGINE — Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to ro…
- 1666 · ER_BINLOG_ROW_INJECTION_AND_STMT_MODE — Cannot execute statement: impossible to write to binary log since statement is in row format and BINLOG_FORMAT = STATEMENT.
- 1667 · ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE — Cannot execute statement: impossible to write to binary log since more than one engine is involved and at least one engine is self-logging.
- 1668 · ER_BINLOG_UNSAFE_LIMIT — The statement is unsafe because it uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
- 1670 · ER_BINLOG_UNSAFE_SYSTEM_TABLE — The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may diff…
- 1671 · ER_BINLOG_UNSAFE_AUTOINC_COLUMNS — Statement is unsafe because it invokes a trigger or a stored function that inserts into an AUTO_INCREMENT column. Inserted values cannot be logged cor…
- 1672 · ER_BINLOG_UNSAFE_UDF — Statement is unsafe because it uses a UDF which may not return the same value on the replica.
- 1673 · ER_BINLOG_UNSAFE_SYSTEM_VARIABLE — Statement is unsafe because it uses a system variable that may have a different value on the replica.
- 1674 · ER_BINLOG_UNSAFE_SYSTEM_FUNCTION — Statement is unsafe because it uses a system function that may return a different value on the replica.
- 1675 · ER_BINLOG_UNSAFE_NONTRANS_AFTER_TRANS — Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
- 1676 · ER_MESSAGE_AND_STATEMENT — %s Statement: %s
- 1678 · ER_REPLICA_CANT_CREATE_CONVERSION — Can't create conversion table for table '%s.%s'
- 1679 · ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_FORMAT — Cannot modify @@session.binlog_format inside a transaction
- 1680 · ER_PATH_LENGTH — The path specified for %s is too long.
- 1681 · ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT — '%s' is deprecated and will be removed in a future release.
- 1682 · ER_WRONG_NATIVE_TABLE_STRUCTURE — Native table '%s'.'%s' has the wrong structure
- 1683 · ER_WRONG_PERFSCHEMA_USAGE — Invalid performance_schema usage.
- 1684 · ER_WARN_I_S_SKIPPED_TABLE — Table '%s'.'%s' was skipped since its definition is being modified by concurrent DDL statement
- 1685 · ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_DIRECT — Cannot modify @@session.binlog_direct_non_transactional_updates inside a transaction
- 1686 · ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_DIRECT — Cannot change the binlog direct flag inside a stored function or trigger
- 1687 · ER_SPATIAL_MUST_HAVE_GEOM_COL — A SPATIAL index may only contain a geometrical type column
- 1688 · ER_TOO_LONG_INDEX_COMMENT — Comment for index '%s' is too long (max = %lu)
- 1689 · ER_LOCK_ABORTED — Wait on a lock was aborted due to a pending exclusive lock
- 1690 · ER_DATA_OUT_OF_RANGE — %s value is out of range in '%s'
- 1692 · ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE — Mixing self-logging and non-self-logging engines in a statement is unsafe.
- 1693 · ER_BINLOG_UNSAFE_MIXED_STATEMENT — Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
- 1694 · ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SQL_LOG_BIN — Cannot modify @@session.sql_log_bin inside a transaction
- 1695 · ER_STORED_FUNCTION_PREVENTS_SWITCH_SQL_LOG_BIN — Cannot change the sql_log_bin inside a stored function or trigger
- 1696 · ER_FAILED_READ_FROM_PAR_FILE — Failed to read from the .par file
- 1697 · ER_VALUES_IS_NOT_INT_TYPE_ERROR — VALUES value for partition '%s' must have type INT
- 1698 · ER_ACCESS_DENIED_NO_PASSWORD_ERROR — Access denied for user '%s'@'%s'
- 1701 · ER_TRUNCATE_ILLEGAL_FK — Cannot truncate a table referenced in a foreign key constraint (%s)
- 1702 · ER_PLUGIN_IS_PERMANENT — Plugin '%s' is force_plus_permanent and can not be unloaded
- 1703 · ER_REPLICA_HEARTBEAT_VALUE_OUT_OF_RANGE_MIN — The requested value for the heartbeat period is less than 1 millisecond. The value is reset to 0, meaning that heartbeating will effectively be disabl…
- 1704 · ER_REPLICA_HEARTBEAT_VALUE_OUT_OF_RANGE_MAX — The requested value for the heartbeat period exceeds the value of `replica_net_timeout' seconds. A sensible value for the period should be less than t…
- 1705 · ER_STMT_CACHE_FULL — Multi-row statements required more than 'max_binlog_stmt_cache_size' bytes of storage; increase this mysqld variable and try again
- 1706 · ER_MULTI_UPDATE_KEY_CONFLICT — Primary key/partition key update is not allowed since the table is updated both as '%s' and '%s'.
- 1707 · ER_TABLE_NEEDS_REBUILD — Table rebuild required. Please do "ALTER TABLE `%s` FORCE" or dump/reload to fix it!
- 1708 · WARN_OPTION_BELOW_LIMIT — The value of '%s' should be no less than the value of '%s'
- 1709 · ER_INDEX_COLUMN_TOO_LONG — Index column size too large. The maximum column size is %lu bytes.
- 1710 · ER_ERROR_IN_TRIGGER_BODY — Trigger '%s' has an error in its body: '%s'
- 1711 · ER_ERROR_IN_UNKNOWN_TRIGGER_BODY — Unknown trigger has an error in its body: '%s'
- 1712 · ER_INDEX_CORRUPT — Index %s is corrupted
- 1713 · ER_UNDO_RECORD_TOO_BIG — Undo log record is too big.
- 1714 · ER_BINLOG_UNSAFE_INSERT_IGNORE_SELECT — INSERT IGNORE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order c…
- 1715 · ER_BINLOG_UNSAFE_INSERT_SELECT_UPDATE — INSERT... SELECT... ON DUPLICATE KEY UPDATE is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are u…
- 1716 · ER_BINLOG_UNSAFE_REPLACE_SELECT — REPLACE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order cannot…
- 1717 · ER_BINLOG_UNSAFE_CREATE_IGNORE_SELECT — CREATE... IGNORE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order c…
- 1718 · ER_BINLOG_UNSAFE_CREATE_REPLACE_SELECT — CREATE... REPLACE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order…
- 1719 · ER_BINLOG_UNSAFE_UPDATE_IGNORE — UPDATE IGNORE is unsafe because the order in which rows are updated determines which (if any) rows are ignored. This order cannot be predicted and may…
- 1720 · ER_PLUGIN_NO_UNINSTALL — Plugin '%s' is marked as not dynamically uninstallable. You have to stop the server to uninstall it.
- 1721 · ER_PLUGIN_NO_INSTALL — Plugin '%s' is marked as not dynamically installable. You have to stop the server to install it.
- 1722 · ER_BINLOG_UNSAFE_WRITE_AUTOINC_SELECT — Statements writing to a table with an auto-increment column after selecting from another table are unsafe because the order in which rows are retrieve…
- 1723 · ER_BINLOG_UNSAFE_CREATE_SELECT_AUTOINC — CREATE TABLE... SELECT... on a table with an auto-increment column is unsafe because the order in which rows are retrieved by the SELECT determines wh…
- 1724 · ER_BINLOG_UNSAFE_INSERT_TWO_KEYS — INSERT... ON DUPLICATE KEY UPDATE on a table with more than one UNIQUE KEY is unsafe
- 1725 · ER_TABLE_IN_FK_CHECK — Table is being used in foreign key check.
- 1726 · ER_UNSUPPORTED_ENGINE — Storage engine '%s' does not support system tables. [%s.%s]
- 1727 · ER_BINLOG_UNSAFE_AUTOINC_NOT_FIRST — INSERT into autoincrement field which is not the first part in the composed primary key is unsafe.
- 1728 · ER_CANNOT_LOAD_FROM_TABLE_V2 — Cannot load from %s.%s. The table is probably corrupted
- 1729 · ER_SOURCE_DELAY_VALUE_OUT_OF_RANGE — The requested value %s for the source delay exceeds the maximum %u
- 1730 · ER_ONLY_FD_AND_RBR_EVENTS_ALLOWED_IN_BINLOG_STATEMENT — Only Format_description_log_event and row events are allowed in BINLOG statements (but %s was provided)
- 1731 · ER_PARTITION_EXCHANGE_DIFFERENT_OPTION — Non matching attribute '%s' between partition and table
- 1732 · ER_PARTITION_EXCHANGE_PART_TABLE — Table to exchange with partition is partitioned: '%s'
- 1733 · ER_PARTITION_EXCHANGE_TEMP_TABLE — Table to exchange with partition is temporary: '%s'
- 1734 · ER_PARTITION_INSTEAD_OF_SUBPARTITION — Subpartitioned table, use subpartition instead of partition
- 1735 · ER_UNKNOWN_PARTITION — Unknown partition '%s' in table '%s'
- 1736 · ER_TABLES_DIFFERENT_METADATA — Tables have different definitions
- 1737 · ER_ROW_DOES_NOT_MATCH_PARTITION — Found a row that does not match the partition
- 1738 · ER_BINLOG_CACHE_SIZE_GREATER_THAN_MAX — Option binlog_cache_size (%lu) is greater than max_binlog_cache_size (%lu); setting binlog_cache_size equal to max_binlog_cache_size.
- 1739 · ER_WARN_INDEX_NOT_APPLICABLE — Cannot use %s access on index '%s' due to type or collation conversion on field '%s'
- 1740 · ER_PARTITION_EXCHANGE_FOREIGN_KEY — Table to exchange with partition has foreign key references: '%s'
- 1742 · ER_RPL_INFO_DATA_TOO_LONG — Data for column '%s' too long
- 1745 · ER_BINLOG_STMT_CACHE_SIZE_GREATER_THAN_MAX — Option binlog_stmt_cache_size (%lu) is greater than max_binlog_stmt_cache_size (%lu); setting binlog_stmt_cache_size equal to max_binlog_stmt_cache_si…
- 1746 · ER_CANT_UPDATE_TABLE_IN_CREATE_TABLE_SELECT — Can't update table '%s' while '%s' is being created.
- 1747 · ER_PARTITION_CLAUSE_ON_NONPARTITIONED — PARTITION () clause on non partitioned table
- 1748 · ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET — Found a row not matching the given partition set
- 1750 · ER_CHANGE_RPL_INFO_REPOSITORY_FAILURE — Failure while changing the type of replication repository: %s.
- 1751 · ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_CREATED_TEMP_TABLE — The creation of some temporary tables could not be rolled back.
- 1752 · ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_DROPPED_TEMP_TABLE — Some temporary tables were dropped, but these operations could not be rolled back.
- 1753 · ER_MTA_FEATURE_IS_NOT_SUPPORTED — %s is not supported in multi-threaded replica mode. %s
- 1754 · ER_MTA_UPDATED_DBS_GREATER_MAX — The number of modified databases exceeds the maximum %d; the database names will not be included in the replication event metadata.
- 1755 · ER_MTA_CANT_PARALLEL — Cannot execute the current event group in the parallel mode. Encountered event %s, relay-log name %s, position %s which prevents execution of this eve…
- 1756 · ER_MTA_INCONSISTENT_DATA — %s
- 1757 · ER_FULLTEXT_NOT_SUPPORTED_WITH_PARTITIONING — FULLTEXT index is not supported for partitioned tables.
- 1758 · ER_DA_INVALID_CONDITION_NUMBER — Invalid condition number
- 1759 · ER_INSECURE_PLAIN_TEXT — Sending passwords in plain text without SSL/TLS is extremely insecure.
- 1760 · ER_INSECURE_CHANGE_SOURCE — Storing MySQL user name or password information in the connection metadata repository is not secure and is therefore not recommended. Please consider …
- 1761 · ER_FOREIGN_DUPLICATE_KEY_WITH_CHILD_INFO — Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in table '%s', key '%s'
- 1762 · ER_FOREIGN_DUPLICATE_KEY_WITHOUT_CHILD_INFO — Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in a child table
- 1763 · ER_SQLTHREAD_WITH_SECURE_REPLICA — Setting authentication options is not possible when only the Replica SQL Thread is being started.
- 1764 · ER_TABLE_HAS_NO_FT — The table does not have FULLTEXT index to support this query
- 1765 · ER_VARIABLE_NOT_SETTABLE_IN_SF_OR_TRIGGER — The system variable %s cannot be set in stored functions or triggers.
- 1766 · ER_VARIABLE_NOT_SETTABLE_IN_TRANSACTION — The system variable %s cannot be set when there is an ongoing transaction.
- 1769 · ER_SET_STATEMENT_CANNOT_INVOKE_FUNCTION — The statement 'SET %s' cannot invoke a stored function.
- 1770 · ER_GTID_NEXT_CANT_BE_AUTOMATIC_IF_GTID_NEXT_LIST_IS_NON_NULL — The system variable @@SESSION.GTID_NEXT cannot be 'AUTOMATIC' when @@SESSION.GTID_NEXT_LIST is non-NULL.
- 1772 · ER_MALFORMED_GTID_SET_SPECIFICATION — Malformed GTID set specification '%s'.
- 1773 · ER_MALFORMED_GTID_SET_ENCODING — Malformed GTID set encoding.
- 1774 · ER_MALFORMED_GTID_SPECIFICATION — Malformed GTID specification '%s'.
- 1775 · ER_GNO_EXHAUSTED — Impossible to generate GTID: the integer component reached the maximum value. Restart the server with a new server_uuid.
- 1776 · ER_BAD_REPLICA_AUTO_POSITION — Parameters SOURCE_LOG_FILE, SOURCE_LOG_POS, RELAY_LOG_FILE and RELAY_LOG_POS cannot be set when SOURCE_AUTO_POSITION is active.
- 1777 · ER_AUTO_POSITION_REQUIRES_GTID_MODE_NOT_OFF — CHANGE REPLICATION SOURCE TO SOURCE_AUTO_POSITION = 1 cannot be executed because @@GLOBAL.GTID_MODE = OFF.
- 1778 · ER_CANT_DO_IMPLICIT_COMMIT_IN_TRX_WHEN_GTID_NEXT_IS_SET — Cannot execute statements with implicit commit inside a transaction when @@SESSION.GTID_NEXT == 'UUID:NUMBER'.
- 1779 · ER_GTID_MODE_ON_REQUIRES_ENFORCE_GTID_CONSISTENCY_ON — GTID_MODE = ON requires ENFORCE_GTID_CONSISTENCY = ON.
- 1781 · ER_CANT_SET_GTID_NEXT_TO_GTID_WHEN_GTID_MODE_IS_OFF — @@SESSION.GTID_NEXT cannot be set to UUID:NUMBER when @@GLOBAL.GTID_MODE = OFF.
- 1782 · ER_CANT_SET_GTID_NEXT_TO_ANONYMOUS_WHEN_GTID_MODE_IS_ON — @@SESSION.GTID_NEXT cannot be set to ANONYMOUS when @@GLOBAL.GTID_MODE = ON.
- 1783 · ER_CANT_SET_GTID_NEXT_LIST_TO_NON_NULL_WHEN_GTID_MODE_IS_OFF — @@SESSION.GTID_NEXT_LIST cannot be set to a non-NULL value when @@GLOBAL.GTID_MODE = OFF.
- 1785 · ER_GTID_UNSAFE_NON_TRANSACTIONAL_TABLE — Statement violates GTID consistency: Updates to non-transactional tables can only be done in either autocommitted statements or single-statement trans…
- 1786 · ER_GTID_UNSAFE_CREATE_SELECT — Statement violates GTID consistency: CREATE TABLE ... SELECT.
- 1788 · ER_GTID_MODE_CAN_ONLY_CHANGE_ONE_STEP_AT_A_TIME — The value of @@GLOBAL.GTID_MODE can only be changed one step at a time: OFF <-> OFF_PERMISSIVE <-> ON_PERMISSIVE <-> ON. Also note that this value mus…
- 1789 · ER_SOURCE_HAS_PURGED_REQUIRED_GTIDS — Cannot replicate because the source purged required binary logs. Replicate the missing transactions from elsewhere, or provision a new replica from ba…
- 1790 · ER_CANT_SET_GTID_NEXT_WHEN_OWNING_GTID — @@SESSION.GTID_NEXT cannot be changed by a client that owns a GTID. The client owns %s. Ownership is released on COMMIT or ROLLBACK.
- 1791 · ER_UNKNOWN_EXPLAIN_FORMAT — Unknown EXPLAIN format name: '%s'
- 1792 · ER_CANT_EXECUTE_IN_READ_ONLY_TRANSACTION — Cannot execute statement in a READ ONLY transaction.
- 1793 · ER_TOO_LONG_TABLE_PARTITION_COMMENT — Comment for table partition '%s' is too long (max = %lu)
- 1794 · ER_REPLICA_CONFIGURATION — Replica is not configured or failed to initialize properly. You must at least set --server-id to enable either a source or a replica. Additional error…
- 1795 · ER_INNODB_FT_LIMIT — InnoDB presently supports one FULLTEXT index creation at a time
- 1796 · ER_INNODB_NO_FT_TEMP_TABLE — Cannot create FULLTEXT index on temporary InnoDB table
- 1797 · ER_INNODB_FT_WRONG_DOCID_COLUMN — Column '%s' is of wrong type for an InnoDB FULLTEXT index
- 1798 · ER_INNODB_FT_WRONG_DOCID_INDEX — Index '%s' is of wrong type for an InnoDB FULLTEXT index
- 1799 · ER_INNODB_ONLINE_LOG_TOO_BIG — Creating index '%s' required more than 'innodb_online_alter_log_max_size' bytes of modification log. Please try again.
- 1800 · ER_UNKNOWN_ALTER_ALGORITHM — Unknown ALGORITHM '%s'
- 1801 · ER_UNKNOWN_ALTER_LOCK — Unknown LOCK type '%s'
- 1802 · ER_MTA_CHANGE_SOURCE_CANT_RUN_WITH_GAPS — CHANGE REPLICATION SOURCE cannot be executed when the replica was stopped with an error or killed in MTA mode. Consider using RESET REPLICA or START R…
- 1803 · ER_MTA_RECOVERY_FAILURE — Cannot recover after REPLICA errored out in parallel execution mode. Additional error messages can be found in the MySQL error log.
- 1804 · ER_MTA_RESET_WORKERS — Cannot clean up worker info tables. Additional error messages can be found in the MySQL error log.
- 1805 · ER_COL_COUNT_DOESNT_MATCH_CORRUPTED_V2 — Column count of %s.%s is wrong. Expected %d, found %d. The table is probably corrupted
- 1806 · ER_REPLICA_SILENT_RETRY_TRANSACTION — Replica must silently retry current transaction
- 1807 · ER_DISCARD_FK_CHECKS_RUNNING — There is a foreign key check running on table '%s'. Cannot discard the table.
- 1808 · ER_TABLE_SCHEMA_MISMATCH — Schema mismatch (%s)
- 1809 · ER_TABLE_IN_SYSTEM_TABLESPACE — Table '%s' in system tablespace
- 1810 · ER_IO_READ_ERROR — IO Read error: (%lu, %s) %s
- 1811 · ER_IO_WRITE_ERROR — IO Write error: (%lu, %s) %s
- 1812 · ER_TABLESPACE_MISSING — Tablespace is missing for table %s.
- 1813 · ER_TABLESPACE_EXISTS — Tablespace '%s' exists.
- 1814 · ER_TABLESPACE_DISCARDED — Tablespace has been discarded for table '%s'
- 1815 · ER_INTERNAL_ERROR — Internal error: %s
- 1816 · ER_INNODB_IMPORT_ERROR — ALTER TABLE %s IMPORT TABLESPACE failed with error %lu : '%s'
- 1817 · ER_INNODB_INDEX_CORRUPT — Index corrupt: %s
- 1818 · ER_INVALID_YEAR_COLUMN_LENGTH — Invalid display width. Use YEAR instead.
- 1819 · ER_NOT_VALID_PASSWORD — Your password does not satisfy the current policy requirements
- 1820 · ER_MUST_CHANGE_PASSWORD — You must reset your password using ALTER USER statement before executing this statement.
- 1821 · ER_FK_NO_INDEX_CHILD — Failed to add the foreign key constraint. Missing index for constraint '%s' in the foreign table '%s'
- 1822 · ER_FK_NO_INDEX_PARENT — Failed to add the foreign key constraint. Missing index for constraint '%s' in the referenced table '%s'
- 1823 · ER_FK_FAIL_ADD_SYSTEM — Failed to add the foreign key constraint '%s' to system tables
- 1824 · ER_FK_CANNOT_OPEN_PARENT — Failed to open the referenced table '%s'
- 1825 · ER_FK_INCORRECT_OPTION — Failed to add the foreign key constraint on table '%s'. Incorrect options in FOREIGN KEY constraint '%s'
- 1826 · ER_FK_DUP_NAME — Duplicate foreign key constraint name '%s'
- 1827 · ER_PASSWORD_FORMAT — The password hash doesn't have the expected format.
- 1828 · ER_FK_COLUMN_CANNOT_DROP — Cannot drop column '%s': needed in a foreign key constraint '%s'
- 1829 · ER_FK_COLUMN_CANNOT_DROP_CHILD — Cannot drop column '%s': needed in a foreign key constraint '%s' of table '%s'
- 1830 · ER_FK_COLUMN_NOT_NULL — Column '%s' cannot be NOT NULL: needed in a foreign key constraint '%s' SET NULL
- 1831 · ER_DUP_INDEX — Duplicate index '%s' defined on the table '%s.%s'. This is deprecated and will be disallowed in a future release.
- 1832 · ER_FK_COLUMN_CANNOT_CHANGE — Cannot change column '%s': used in a foreign key constraint '%s'
- 1833 · ER_FK_COLUMN_CANNOT_CHANGE_CHILD — Cannot change column '%s': used in a foreign key constraint '%s' of table '%s'
- 1835 · ER_MALFORMED_PACKET — Malformed communication packet.
- 1836 · ER_READ_ONLY_MODE — Running in read-only mode
- 1837 · ER_GTID_NEXT_TYPE_UNDEFINED_GTID — When @@SESSION.GTID_NEXT is set to a GTID, you must explicitly set it to a different value after a COMMIT or ROLLBACK. Please check GTID_NEXT variable…
- 1838 · ER_VARIABLE_NOT_SETTABLE_IN_SP — The system variable %s cannot be set in stored procedures.
- 1840 · ER_CANT_SET_GTID_PURGED_WHEN_GTID_EXECUTED_IS_NOT_EMPTY — @@GLOBAL.GTID_PURGED can only be set when @@GLOBAL.GTID_EXECUTED is empty.
- 1841 · ER_CANT_SET_GTID_PURGED_WHEN_OWNED_GTIDS_IS_NOT_EMPTY — @@GLOBAL.GTID_PURGED can only be set when there are no ongoing transactions (not even in other clients).
- 1842 · ER_GTID_PURGED_WAS_CHANGED — @@GLOBAL.GTID_PURGED was changed from '%s' to '%s'.
- 1843 · ER_GTID_EXECUTED_WAS_CHANGED — @@GLOBAL.GTID_EXECUTED was changed from '%s' to '%s'.
- 1844 · ER_BINLOG_STMT_MODE_AND_NO_REPL_TABLES — Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT, and both replicated and non replicated tables are written…
- 1845 · ER_ALTER_OPERATION_NOT_SUPPORTED — %s is not supported for this operation. Try %s.
- 1846 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON — %s is not supported. Reason: %s. Try %s.
- 1847 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COPY — COPY algorithm requires a lock
- 1848 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_PARTITION — Partition specific operations do not yet support LOCK/ALGORITHM
- 1849 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_RENAME — Columns participating in a foreign key are renamed
- 1850 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COLUMN_TYPE — Cannot change column type INPLACE
- 1851 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_CHECK — Adding foreign keys needs foreign_key_checks=OFF
- 1853 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOPK — Dropping a primary key is not allowed without also adding a new primary key
- 1854 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_AUTOINC — Adding an auto-increment column requires a lock
- 1855 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_HIDDEN_FTS — Cannot replace hidden FTS_DOC_ID with a user-visible one
- 1856 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_CHANGE_FTS — Cannot drop or rename FTS_DOC_ID
- 1857 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FTS — Fulltext index creation requires a lock
- 1859 · ER_DUP_UNKNOWN_IN_INDEX — Duplicate entry for key '%s'
- 1860 · ER_IDENT_CAUSES_TOO_LONG_PATH — Long database name and identifier for object resulted in path length exceeding %d characters. Path: '%s'.
- 1861 · ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOT_NULL — cannot silently convert NULL values, as required in this SQL_MODE
- 1862 · ER_MUST_CHANGE_PASSWORD_LOGIN — Your password has expired. To log in you must change it using a client that supports expired passwords.
- 1863 · ER_ROW_IN_WRONG_PARTITION — Found a row in wrong partition %s
- 1864 · ER_MTA_EVENT_BIGGER_PENDING_JOBS_SIZE_MAX — Cannot schedule event %s, relay-log name %s, position %s to Worker thread because its size %lu exceeds %lu of replica_pending_jobs_size_max.
- 1866 · ER_BINLOG_LOGICAL_CORRUPTION — The binary log file '%s' is logically corrupted: %s
- 1867 · ER_WARN_PURGE_LOG_IN_USE — file %s was not purged because it was being read by %d thread(s), purged only %d out of %d files.
- 1868 · ER_WARN_PURGE_LOG_IS_ACTIVE — file %s was not purged because it is the active log file.
- 1869 · ER_AUTO_INCREMENT_CONFLICT — Auto-increment value in UPDATE conflicts with internally generated values
- 1870 · WARN_ON_BLOCKHOLE_IN_RBR — Row events are not logged for %s statements that modify BLACKHOLE tables in row format. Table(s): '%s'
- 1871 · ER_REPLICA_CM_INIT_REPOSITORY — Replica failed to initialize connection metadata structure from the repository
- 1872 · ER_REPLICA_AM_INIT_REPOSITORY — Replica failed to initialize applier metadata structure from the repository
- 1873 · ER_ACCESS_DENIED_CHANGE_USER_ERROR — Access denied trying to change to user '%s'@'%s' (using password: %s). Disconnecting.
- 1874 · ER_INNODB_READ_ONLY — InnoDB is in read only mode.
- 1875 · ER_STOP_REPLICA_SQL_THREAD_TIMEOUT — STOP REPLICA command execution is incomplete: Replica SQL thread got the stop signal, thread is busy, SQL thread will stop once the current task is co…
- 1876 · ER_STOP_REPLICA_IO_THREAD_TIMEOUT — STOP REPLICA command execution is incomplete: Replica IO thread got the stop signal, thread is busy, IO thread will stop once the current task is comp…
- 1877 · ER_TABLE_CORRUPT — Operation cannot be performed. The table '%s.%s' is missing, corrupt or contains bad data.
- 1878 · ER_TEMP_FILE_WRITE_FAILURE — Temporary file write failure.
- 1879 · ER_INNODB_FT_AUX_NOT_HEX_ID — Upgrade index name failed, please use create index(alter table) algorithm copy to rebuild index.
- 1880 · ER_OLD_TEMPORALS_UPGRADED — TIME/TIMESTAMP/DATETIME columns of old format have been upgraded to the new format.
- 1881 · ER_INNODB_FORCED_RECOVERY — Operation not allowed when innodb_force_recovery > 0.
- 1882 · ER_AES_INVALID_IV — The initialization vector supplied to %s is too short. Must be at least %d bytes long
- 1883 · ER_PLUGIN_CANNOT_BE_UNINSTALLED — Plugin '%s' cannot be uninstalled now. %s
- 1884 · ER_GTID_UNSAFE_BINLOG_SPLITTABLE_STATEMENT_AND_ASSIGNED_GTID — Cannot execute statement because it needs to be written to the binary log as multiple statements, and this is not allowed when @@SESSION.GTID_NEXT == …
- 1885 · ER_REPLICA_HAS_MORE_GTIDS_THAN_SOURCE — Replica has more GTIDs than the source has, using the source's SERVER_UUID. This may indicate that the the last binary log file was truncated or lost,…
- 1886 · ER_MISSING_KEY — The table '%s.%s' does not have the necessary key(s) defined on it. Please check the table definition and create index(s) accordingly.
- 1887 · WARN_NAMED_PIPE_ACCESS_EVERYONE — Setting named_pipe_full_access_group='%s' is insecure. Consider using a Windows group with fewer members.
- 2000 · CR_UNKNOWN_ERROR — Unknown MySQL error
- 2001 · CR_SOCKET_CREATE_ERROR — Can't create UNIX socket (%d)
- 2002 · CR_CONNECTION_ERROR — Can't connect to local MySQL server through socket '%s' (%d)
- 2003 · CR_CONN_HOST_ERROR — Can't connect to MySQL server on '%s:%u' (%d)
- 2004 · CR_IPSOCK_ERROR — Can't create TCP/IP socket (%d)
- 2005 · CR_UNKNOWN_HOST — Unknown MySQL server host '%s' (%d)
- 2006 · CR_SERVER_GONE_ERROR — MySQL server has gone away
- 2007 · CR_VERSION_ERROR — Protocol mismatch; server version = %d, client version = %d
- 2008 · CR_OUT_OF_MEMORY — MySQL client ran out of memory
- 2009 · CR_WRONG_HOST_INFO — Wrong host info
- 2010 · CR_LOCALHOST_CONNECTION — Localhost via UNIX socket
- 2011 · CR_TCP_CONNECTION — %s via TCP/IP
- 2012 · CR_SERVER_HANDSHAKE_ERR — Error in server handshake
- 2013 · CR_SERVER_LOST — Lost connection to MySQL server during query
- 2014 · CR_COMMANDS_OUT_OF_SYNC — Commands out of sync; you can't run this command now
- 2015 · CR_NAMEDPIPE_CONNECTION — Named pipe: %s
- 2016 · CR_NAMEDPIPEWAIT_ERROR — Can't wait for named pipe to host: %s pipe: %s (%lu)
- 2017 · CR_NAMEDPIPEOPEN_ERROR — Can't open named pipe to host: %s pipe: %s (%lu)
- 2018 · CR_NAMEDPIPESETSTATE_ERROR — Can't set state of named pipe to host: %s pipe: %s (%lu)
- 2019 · CR_CANT_READ_CHARSET — Can't initialize character set %s (path: %s)
- 2020 · CR_NET_PACKET_TOO_LARGE — Got packet bigger than 'max_allowed_packet' bytes
- 2021 · CR_EMBEDDED_CONNECTION — Embedded server
- 2022 · CR_PROBE_REPLICA_STATUS — Error on SHOW REPLICA STATUS:
- 2023 · CR_PROBE_REPLICA_HOSTS — Error on SHOW REPLICA HOSTS:
- 2024 · CR_PROBE_REPLICA_CONNECT — Error connecting to replica:
- 2025 · CR_PROBE_SOURCE_CONNECT — Error connecting to source:
- 2026 · CR_SSL_CONNECTION_ERROR — SSL connection error: %s
- 2027 · CR_MALFORMED_PACKET — Malformed packet
- 2028 · CR_WRONG_LICENSE — This client library is licensed only for use with MySQL servers having '%s' license
- 2029 · CR_NULL_POINTER — Invalid use of null pointer
- 2030 · CR_NO_PREPARE_STMT — Statement not prepared
- 2031 · CR_PARAMS_NOT_BOUND — No data supplied for parameters in prepared statement
- 2032 · CR_DATA_TRUNCATED — Data truncated
- 2033 · CR_NO_PARAMETERS_EXISTS — No parameters exist in the statement
- 2034 · CR_INVALID_PARAMETER_NO — Invalid parameter number
- 2035 · CR_INVALID_BUFFER_USE — Can't send long data for non-string/non-binary data types (parameter: %d)
- 2036 · CR_UNSUPPORTED_PARAM_TYPE — Using unsupported buffer type: %d (parameter: %d)
- 2037 · CR_SHARED_MEMORY_CONNECTION — Shared memory: %s
- 2038 · CR_SHARED_MEMORY_CONNECT_REQUEST_ERROR — Can't open shared memory; client could not create request event (%lu)
- 2039 · CR_SHARED_MEMORY_CONNECT_ANSWER_ERROR — Can't open shared memory; no answer event received from server (%lu)
- 2040 · CR_SHARED_MEMORY_CONNECT_FILE_MAP_ERROR — Can't open shared memory; server could not allocate file mapping (%lu)
- 2041 · CR_SHARED_MEMORY_CONNECT_MAP_ERROR — Can't open shared memory; server could not get pointer to file mapping (%lu)
- 2042 · CR_SHARED_MEMORY_FILE_MAP_ERROR — Can't open shared memory; client could not allocate file mapping (%lu)
- 2043 · CR_SHARED_MEMORY_MAP_ERROR — Can't open shared memory; client could not get pointer to file mapping (%lu)
- 2044 · CR_SHARED_MEMORY_EVENT_ERROR — Can't open shared memory; client could not create %s event (%lu)
- 2045 · CR_SHARED_MEMORY_CONNECT_ABANDONED_ERROR — Can't open shared memory; no answer from server (%lu)
- 2046 · CR_SHARED_MEMORY_CONNECT_SET_ERROR — Can't open shared memory; cannot send request event to server (%lu)
- 2047 · CR_CONN_UNKNOW_PROTOCOL — Wrong or unknown protocol
- 2048 · CR_INVALID_CONN_HANDLE — Invalid connection handle
- 2049 · CR_UNUSED_1 — Connection using old (pre-4.1.1) authentication protocol refused (client option 'secure_auth' enabled)
- 2050 · CR_FETCH_CANCELED — Row retrieval was canceled by mysql_stmt_close() call
- 2051 · CR_NO_DATA — Attempt to read column without prior row fetch
- 2052 · CR_NO_STMT_METADATA — Prepared statement contains no metadata
- 2053 · CR_NO_RESULT_SET — Attempt to read a row while there is no result set associated with the statement
- 2054 · CR_NOT_IMPLEMENTED — This feature is not implemented yet
- 2055 · CR_SERVER_LOST_EXTENDED — Lost connection to MySQL server at '%s', system error: %d
- 2056 · CR_STMT_CLOSED — Statement closed indirectly because of a preceding %s() call
- 2057 · CR_NEW_STMT_METADATA — The number of columns in the result set differs from the number of bound buffers. You must reset the statement, rebind the result set columns, and exe…
- 2058 · CR_ALREADY_CONNECTED — This handle is already connected. Use a separate handle for each connection.
- 2059 · CR_AUTH_PLUGIN_CANNOT_LOAD — Authentication plugin '%s' cannot be loaded: %s
- 2060 · CR_DUPLICATE_CONNECTION_ATTR — There is an attribute with the same name already
- 2061 · CR_AUTH_PLUGIN_ERR — Authentication plugin '%s' reported error: %s
- 2062 · CR_INSECURE_API_ERR — Insecure API function call: '%s' Use instead: '%s'
- 2063 · CR_FILE_NAME_TOO_LONG — File name is too long
- 2064 · CR_SSL_FIPS_MODE_ERR — Set FIPS mode ON/STRICT failed
- 2065 · CR_DEPRECATED_COMPRESSION_NOT_SUPPORTED — Compression protocol not supported with asynchronous protocol
- 2066 · CR_COMPRESSION_WRONGLY_CONFIGURED — Connection failed due to wrongly configured compression algorithm
- 2067 · CR_KERBEROS_USER_NOT_FOUND — SSO user not found, Please perform SSO authentication using kerberos.
- 2068 · CR_LOAD_DATA_LOCAL_INFILE_REJECTED — LOAD DATA LOCAL INFILE file request rejected due to restrictions on access.
- 2069 · CR_LOAD_DATA_LOCAL_INFILE_REALPATH_FAIL — Determining the real path for '%s' failed with error (%d): %s
- 2070 · CR_DNS_SRV_LOOKUP_FAILED — DNS SRV lookup failed with error : %d
- 2071 · CR_MANDATORY_TRACKER_NOT_FOUND — Client does not recognise tracker type %d marked as mandatory by server.
- 2072 · CR_INVALID_FACTOR_NO — Invalid first argument for MYSQL_OPT_USER_PASSWORD option. Valid value should be between 1 and 3 inclusive.
- 2073 · CR_CANT_GET_SESSION_DATA — Can't get session data: %s
- 2074 · CR_INVALID_CLIENT_CHARSET — '%s' character set is having more than 1 byte minimum character length, which cannot be used as a client character set. Please use any of the single b…
- 2075 · CR_TLS_SERVER_NOT_FOUND — Server rejected the ssl handshake for specified sni servername, sslerror: %s
- 3000 · ER_FILE_CORRUPT — File %s is corrupted
- 3001 · ER_ERROR_ON_SOURCE — Query partially completed on the source (error on source: %d) and was aborted. There is a chance that your source is inconsistent at this point. If yo…
- 3003 · ER_STORAGE_ENGINE_NOT_LOADED — Storage engine for table '%s'.'%s' is not loaded.
- 3004 · ER_GET_STACKED_DA_WITHOUT_ACTIVE_HANDLER — GET STACKED DIAGNOSTICS when handler not active
- 3005 · ER_WARN_LEGACY_SYNTAX_CONVERTED — %s is no longer supported. The statement was converted to %s.
- 3006 · ER_BINLOG_UNSAFE_FULLTEXT_PLUGIN — Statement is unsafe because it uses a fulltext parser plugin which may not return the same value on the replica.
- 3007 · ER_CANNOT_DISCARD_TEMPORARY_TABLE — Cannot DISCARD/IMPORT tablespace associated with temporary table
- 3008 · ER_FK_DEPTH_EXCEEDED — Foreign key cascade delete/update exceeds max depth of %d.
- 3009 · ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE_V2 — The column count of %s.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please perform the MySQL upgrade procedure.
- 3010 · ER_WARN_TRIGGER_DOESNT_HAVE_CREATED — Trigger %s.%s.%s does not have CREATED attribute.
- 3011 · ER_REFERENCED_TRG_DOES_NOT_EXIST — Referenced trigger '%s' for the given action time and event type does not exist.
- 3012 · ER_EXPLAIN_NOT_SUPPORTED — EXPLAIN FOR CONNECTION command is supported only for SELECT/UPDATE/INSERT/DELETE/REPLACE
- 3013 · ER_INVALID_FIELD_SIZE — Invalid size for column '%s'.
- 3014 · ER_MISSING_HA_CREATE_OPTION — Table storage engine '%s' found required create option missing
- 3015 · ER_ENGINE_OUT_OF_MEMORY — Out of memory in storage engine '%s'.
- 3016 · ER_PASSWORD_EXPIRE_ANONYMOUS_USER — The password for anonymous user cannot be expired.
- 3017 · ER_REPLICA_SQL_THREAD_MUST_STOP — This operation cannot be performed with a running replica sql thread; run STOP REPLICA SQL_THREAD first
- 3018 · ER_NO_FT_MATERIALIZED_SUBQUERY — Cannot create FULLTEXT index on materialized subquery
- 3019 · ER_INNODB_UNDO_LOG_FULL — Undo Log error: %s
- 3020 · ER_INVALID_ARGUMENT_FOR_LOGARITHM — Invalid argument for logarithm
- 3021 · ER_REPLICA_CHANNEL_IO_THREAD_MUST_STOP — This operation cannot be performed with a running replica io thread; run STOP REPLICA IO_THREAD FOR CHANNEL '%s' first.
- 3022 · ER_WARN_OPEN_TEMP_TABLES_MUST_BE_ZERO — This operation may not be safe when the replica has temporary tables. The tables will be kept open until the server restarts or until the tables are d…
- 3023 · ER_WARN_ONLY_SOURCE_LOG_FILE_NO_POS — CHANGE REPLICATION SOURCE TO with a SOURCE_LOG_FILE clause but no SOURCE_LOG_POS clause may not be safe. The old position value may not be valid for t…
- 3024 · ER_QUERY_TIMEOUT — Query execution was interrupted, maximum statement execution time exceeded
- 3025 · ER_NON_RO_SELECT_DISABLE_TIMER — Select is not a read only statement, disabling timer
- 3026 · ER_DUP_LIST_ENTRY — Duplicate entry '%s'.
- 3028 · ER_AGGREGATE_ORDER_FOR_UNION — Expression #%u of ORDER BY contains aggregate function and applies to a UNION, EXCEPT or INTERSECT
- 3029 · ER_AGGREGATE_ORDER_NON_AGG_QUERY — Expression #%u of ORDER BY contains aggregate function and applies to the result of a non-aggregated query
- 3030 · ER_REPLICA_WORKER_STOPPED_PREVIOUS_THD_ERROR — Replica worker has stopped after at least one previous worker encountered an error when replica-preserve-commit-order was enabled. To preserve commit …
- 3031 · ER_DONT_SUPPORT_REPLICA_PRESERVE_COMMIT_ORDER — replica_preserve_commit_order is not supported %s.
- 3032 · ER_SERVER_OFFLINE_MODE — The server is currently in offline mode
- 3033 · ER_GIS_DIFFERENT_SRIDS — Binary geometry function %s given two geometries of different srids: %u and %u, which should have been identical.
- 3034 · ER_GIS_UNSUPPORTED_ARGUMENT — Calling geometry function %s with unsupported types of arguments.
- 3035 · ER_GIS_UNKNOWN_ERROR — Unknown GIS error occurred in function %s.
- 3036 · ER_GIS_UNKNOWN_EXCEPTION — Unknown exception caught in GIS function %s.
- 3037 · ER_GIS_INVALID_DATA — Invalid GIS data provided to function %s.
- 3038 · ER_BOOST_GEOMETRY_EMPTY_INPUT_EXCEPTION — The geometry has no data in function %s.
- 3039 · ER_BOOST_GEOMETRY_CENTROID_EXCEPTION — Unable to calculate centroid because geometry is empty in function %s.
- 3040 · ER_BOOST_GEOMETRY_OVERLAY_INVALID_INPUT_EXCEPTION — Geometry overlay calculation error: geometry data is invalid in function %s.
- 3041 · ER_BOOST_GEOMETRY_TURN_INFO_EXCEPTION — Geometry turn info calculation error: geometry data is invalid in function %s.
- 3042 · ER_BOOST_GEOMETRY_SELF_INTERSECTION_POINT_EXCEPTION — Analysis procedures of intersection points interrupted unexpectedly in function %s.
- 3043 · ER_BOOST_GEOMETRY_UNKNOWN_EXCEPTION — Unknown exception thrown in function %s.
- 3044 · ER_STD_BAD_ALLOC_ERROR — Memory allocation error: %s in function %s.
- 3045 · ER_STD_DOMAIN_ERROR — Domain error: %s in function %s.
- 3046 · ER_STD_LENGTH_ERROR — Length error: %s in function %s.
- 3047 · ER_STD_INVALID_ARGUMENT — Invalid argument error: %s in function %s.
- 3048 · ER_STD_OUT_OF_RANGE_ERROR — Out of range error: %s in function %s.
- 3049 · ER_STD_OVERFLOW_ERROR — Overflow error: %s in function %s.
- 3050 · ER_STD_RANGE_ERROR — Range error: %s in function %s.
- 3051 · ER_STD_UNDERFLOW_ERROR — Underflow error: %s in function %s.